Effect of Hydraulic Retention Time and Recycle Ratio on the Performance of the Pilot-scale Biofilter Process for Wastewater Treatment Effluent

2020 ◽  
Vol 21 (4) ◽  
pp. 267-274
Author(s):  
Jae-Yoon Kim ◽  
Chae-Young Lee
Keyword(s):  
Wastewater Treatment ◽  
Retention Time ◽  
Hydraulic Retention Time ◽  
Pilot Scale ◽  
Recycle Ratio ◽  
Wastewater Treatment Effluent

The nitrogen removal potential of predenitrification systems in sensitive coastal areas

1995 ◽  
Vol 32 (7) ◽  
pp. 135-142
Author(s):  
E. Görgün ◽  
N. Artan ◽  
D. Orhon ◽  
R. Tasli
Keyword(s):  
Water Quality ◽  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Retention Time ◽  
Treatment Process ◽  
Hydraulic Retention Time ◽  
Domestic Sewage ◽  
Coastal Areas ◽  
Careful Evaluation ◽  
Denitrification Kinetics

Effective nitrogen removal is now required to protect water quality in sensitive coastal areas. This involves a much more difficult treatment process than for conventional domestic sewage as wastewater quantity and quality exhibits severe fluctuations in touristic zones. Activated sludge is currently the most widely used wastewater treatment and may be upgraded as a predenitrification system for nitrogen removal. Interpretation of nitrification and denitrification kinetics reveal a number of useful correlations between significant parameters such as sludge age, C/N ratio, hydraulic retention time, total influent COD. Nitrogen removal potential of predenitrification may be optimized by careful evaluation of wastewater character and the kinetic correlations.

Effect of 200 days' sludge retention time on performance of a pilot scale submerged membrane bioreactor for high strength industrial wastewater treatment

2006 ◽  
Vol 53 (11) ◽  
pp. 269-276 ◽  
Author(s):  
C.T. Hay ◽  
D.D. Sun ◽  
S.L. Khor ◽  
J.O. Leckie
Keyword(s):  
Retention Time ◽  
Industrial Wastewater ◽  
Membrane Bioreactor ◽  
Hydraulic Retention Time ◽  
High Strength ◽  
Pilot Scale ◽  
Submerged Membrane Bioreactor ◽  
Sludge Retention Time ◽  
Organic Removal ◽  
Sludge Concentration

A high strength industrial wastewater was treated using a pilot scale submerged membrane bioreactor (MBR) at a sludge retention time (SRT) of 200 d. The MBR was operated at a high sludge concentration of 20 g/L and a low F/M ratio of 0.11 during 300 d of operation. It was found that the MBR could achieve COD and TOC overall removal efficiencies at more than 99 and 98% TN removal. The turbidity of the permeate was consistently in the range of 0.123 to 0.136 NTU and colour254 absorbance readings varied from 0.0912 to 0.0962 a.u. cm−1. The sludge concentration was inversely proportional to the hydraulic retention time (HRT), yielded excellent organic removal and extremely low sludge production (0.0016 kgVSS/day).

Removal of Total Coliform and TSS for Hospital Wastewater by Optimizing the Role of Typha Angustifolia and Fine Sand-Gravel Media in Horizontal Sub Surface Flow Constructed Wetland

2021 ◽  
Vol 12 (1) ◽  
pp. 20-31
Author(s):  
Abdul Gani Akhmad
Keyword(s):  
Retention Time ◽  
Hydraulic Retention Time ◽  
Fine Sand ◽  
Pilot Scale ◽  
Total Coliform ◽  
Surface Flow ◽  
Pollutant Removal ◽  
Typha Angustifolia ◽  
Hospital Wastewater

This study aims to evaluate the performance of a pilot-scale HSSF-CW utilizing Typha angustifolia and fine sand-gravel media in removing total coliform and TSS from hospital wastewater. Three pilot-scale HSSF-CW cells measuring 1.00 x 0.45 x 0.35 m3 were filled with gravel sand media with a diameter of 5 - 8 mm as high as 35 cm with a submerged media depth of 0.30 m. There were three treatments, namely the first cell (CW1) without plants, the second cell (CW2) was planted with a density of 12 Typha angustifolia plants, and the third cell (CW3) was planted with a density of 24 Typha angustifolia plants. The three HSSF-CW cells received the same wastewater load with total coliform and TSS contents of 91000 MPN / 100 mg and 53 mg / L, respectively, with Hydraulic Loading Rates 3,375 m3 per day. Wastewater was recirculated continuously to achieve the equivalent HSSF-CW area requirement. The experimental results show that the performance of CW3 is more efficient than CW1 and CW2 in total coliform and TSS removal for hospital wastewater. The pollutant removal efficiency at CW3 reached 91.76% for total coliform with one day hydraulic retention time and 81.00% for TSS with two days of hydraulic retention time. This study concludes that the HSSF-CW system using sand-gravel media with a diameter of 5 - 8 mm with a submerged media depth of 0.30 m and planted with Typha angustifolia with a tighter spacing proved to be more efficient in removing total coliform and TSS from hospital wastewater.

scholarly journals Treatment Of Tofu Industry Wastewater Using Bioreactor Anaerobic-Aerobic And Bioball As Media With Variation Of Hidraulic Retention Time

REAKTOR ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 18-25
Author(s):  
Ariani Dwi Astuti ◽  
Dewi Intania Ayu
Keyword(s):  
Wastewater Treatment ◽  
Removal Efficiency ◽  
Retention Time ◽  
Hydraulic Retention Time ◽  
Negative Impact ◽  
Low Cost ◽  
Industrial Effluent ◽  
Organic Loading Rate ◽  
High Concentration ◽  
Small Industries

Tofu which is made by grinding soy bean, generates huge amount of wastewater and thus considered as one of the most polluted food-industrial effluent owing to its high values of organic contents. The small industries of tofu preparation process release the wastewater directly into the water body without being treated first. Prior to discharge this wastewater into the waterbody, the wastewater must be treated to reduce the possibility of negative impact and the contamination of the waterbody. For these small industries, the best alternative of wastewater treatment is one which has the following criteria: easy in operation, low cost operation, low volumes of sludge produced, and can be used in high concentration wastewater. In this research, bioreactor anaerobic-aerobic with media bioball is used. The highest removal efficiency of COD took place in anaerobic zones. Bioreactors were operated with the variations of retention time at 24 hours, 18 hours, and 12 hours. The COD removal efficiency for Hydraulic Retention Time (HRT) of 24 hours, 18 hours and 12 hours were found 90.3% (organic loading rate is 15.1 kg COD/m3.day), 84.4% and 76.3% respectively. The experiment showed that the longer of the hydraulic retention time (HRT), the higher the removal efficiency could be achieved. These occurred because a longer HRT will extend the contact time between wastewater and microorganisms attached. Therefore, microorganisms have a longer time to degrade organic matter in wastewater. Although the removal efficiency in these three-HRT was found high, the effluent of the reactor was still above the effluent standard based on regulation of Ministry of Environmental Permen LH No. 5/2014. Kinetics using Eckenfelder Equation results R2 equal to 0.9991, n equal to 0.293 and K equivalent to 7.3577 mg/L. Keywords: tofu wastewater, anaerobe, aerobe, bioball, wastewater, treatment, attached growth

scholarly journals Optimising the Hydraulic Retention Time in a Pilot-Scale Microbial Electrolysis Cell to Achieve High Volumetric Treatment Rates Using Concentrated Domestic Wastewater

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2945 ◽  
Author(s):  
Daniel D. Leicester ◽  
Jaime M. Amezaga ◽  
Andrew Moore ◽  
Elizabeth S. Heidrich
Keyword(s):  
Retention Time ◽  
Hydraulic Retention Time ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Direct Analysis ◽  
Pilot Scale ◽  
Electrolysis Cell ◽  
Treatment Technique ◽  
Microbial Electrolysis Cell ◽  
Microbial Electrolysis

Bioelectrochemical systems (BES) have the potential to deliver energy-neutral wastewater treatment. Pilot-scale tests have proven that they can operate at low temperatures with real wastewaters. However, volumetric treatment rates (VTRs) have been low, reducing the ability for this technology to compete with activated sludge (AS). This paper describes a pilot-scale microbial electrolysis cell (MEC) operated in continuous flow for 6 months. The reactor was fed return sludge liquor, the concentrated filtrate of anaerobic digestion sludge that has a high chemical oxygen demand (COD). The use of a wastewater with increased soluble organics, along with optimisation of the hydraulic retention time (HRT), resulted in the highest VTR achieved by a pilot-scale MEC treating real wastewater. Peak HRT was 0.5-days, resulting in an average VTR of 3.82 kgCOD/m3∙day and a 55% COD removal efficiency. Finally, using the data obtained, a direct analysis of the potential savings from the reduced loading on AS was then made. Theoretical calculation of the required tank size, with the estimated costs and savings, indicates that the use of an MEC as a return sludge liquor pre-treatment technique could result in an industrially viable system.

Symbiotic algal bacterial wastewater treatment: effect of food to microorganism ratio and hydraulic retention time on the process performance

2007 ◽  
Vol 55 (11) ◽  
pp. 165-171 ◽  
Author(s):  
M. Medina ◽  
U. Neis
Keyword(s):  
Growth Rate ◽  
Wastewater Treatment ◽  
Significant Influence ◽  
Retention Time ◽  
Nutrient Removal ◽  
Hydraulic Retention Time ◽  
Process Performance ◽  
Free Swimming ◽  
Effect Of Food ◽  
Total Nitrogen Removal

Algal incorporation into the biomass is important in an innovative wastewater treatment that exploits the symbiosis between bacterial activated sludge and microalgae (Chlorella vulgaris sp. Hamburg). It allows a good and easy algae separation by means of clarification. The effect of process parameters food to microorganisms ratio (F/M) and hydraulic retention time (HRT) on the process performance, evaluated by settleability, microalgae incorporation to biomass and nutrient removal, was studied. HRT hinted at a significant influence in the growth rate of algae, while F/M turned out to be important for stability when algae are incorporated into the biomass. This parameter also affects the total nitrogen removal of the treatment. Stable flocs with incorporated algae and supernatants with low free swimming algae concentrations were obtained at high HRT and low F/M values.

Sign in / Sign up

Export Citation Format

Share Document