Evaluation of an Anisotropic Turbulence Model for Simulation of Three-dimensional Cases

2020 ◽  
Author(s):  
Leonardo Machado da Rosa ◽  
Daniela Koerich ◽  
Tommaso Oggian ◽  
Henry França Meier
Keyword(s):  
Turbulence Model ◽  
Three Dimensional ◽  
Anisotropic Turbulence

scholarly journals Three-Dimensional Turbulent Vortex Shedding From a Surface-Mounted Square Cylinder: Predictions With Large-Eddy Simulations and URANS

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
B. A. Younis ◽  
A. Abrishamchi
Keyword(s):  
Experimental Data ◽  
Turbulence Model ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Large Eddy Simulations ◽  
Navier Stokes ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Large Eddy

The paper reports on the prediction of the turbulent flow field around a three-dimensional, surface mounted, square-sectioned cylinder at Reynolds numbers in the range 104–105. The effects of turbulence are accounted for in two different ways: by performing large-eddy simulations (LES) with a Smagorinsky model for the subgrid-scale motions and by solving the unsteady form of the Reynolds-averaged Navier–Stokes equations (URANS) together with a turbulence model to determine the resulting Reynolds stresses. The turbulence model used is a two-equation, eddy-viscosity closure that incorporates a term designed to account for the interactions between the organized mean-flow periodicity and the random turbulent motions. Comparisons with experimental data show that the two approaches yield results that are generally comparable and in good accord with the experimental data. The main conclusion of this work is that the URANS approach, which is considerably less demanding in terms of computer resources than LES, can reliably be used for the prediction of unsteady separated flows provided that the effects of organized mean-flow unsteadiness on the turbulence are properly accounted for in the turbulence model.

A Reynolds-Averaged Navier-Stokes Solver in a Turbomachinery Design System

2007 ◽  
Author(s):  
Fahua Gu ◽  
Mark R. Anderson
Keyword(s):  
Turbulence Model ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Integrated Design ◽  
Navier Stokes ◽  
Design System ◽  
Navier Stokes Equations ◽  
Wall Functions ◽  
Machine Performance ◽  
Reynolds Averaged Navier Stokes

The design of turbomachinery has been focusing on the improvement of the machine efficiency and the reduction of the design cost. This paper presents an integrated design system to create the machine geometry and to predict the machine performance at different levels of approximation, including one-dimensional design and analysis, quasi-three-dimensional-(blade-to-blade, throughflow) and full-three-dimensional-steady-state CFD analysis. One of the most important components, the Reynolds-averaged Navier-Stokes solver, is described in detail. It originated from the Dawes solver with numerous enhancements. They include the use of the low speed pre-conditioned full Navier-Stokes equations, the addition of the Spalart-Allmaras turbulence model and an improvement of wall functions related with the turbulence model. The latest upwind scheme, AUSM, has been implemented too. The Dawes code has been rewritten into a multi-block solver for O, C, and H grids. This paper provides some examples to evaluate the effect of grid topology on the machine performance prediction.

scholarly journals Design and analysis of flow rectifier of gas turbine flowmeter

2013 ◽  
Vol 17 (5) ◽  
pp. 1504-1507 ◽  
Author(s):  
Zhi-Fei Li ◽  
Zheng Du ◽  
Kai Zhang ◽  
Dong-Sheng Li ◽  
Zhong-Di Su ◽  
...  
Keyword(s):  
Experimental Data ◽  
Flow Field ◽  
Computational Model ◽  
Pressure Distribution ◽  
Gas Turbine ◽  
Turbulence Model ◽  
Pressure Loss ◽  
Three Dimensional ◽  
Turbine Flowmeter ◽  
Good Agreement

Three-dimensional computational model for a gas turbine flowmeter is proposed, and the finite volume based SIMPLEC method and k-? turbulence model are used to obtain the detailed information of flow field in turbine flowmeter, such as velocity and pressure distribution. Comparison between numerical results and experimental data reveals a good agreement. A rectifier with little pressure loss is optimally designed and validated numerically and experimentally.

scholarly journals Numerical simulation of mixing by Rayleigh–Taylor and Richtmyer–Meshkov instabilities

1994 ◽  
Vol 12 (4) ◽  
pp. 725-750 ◽  
Author(s):  
D.L. Youngs
Keyword(s):  
Numerical Simulation ◽  
Turbulence Model ◽  
Turbulent Mixing ◽  
Inertial Confinement Fusion ◽  
Three Dimensional ◽  
Small Scale ◽  
Inertial Confinement ◽  
Two Dimensional ◽  
Confinement Fusion ◽  
Icf Target

Rayleigh-Taylor (RT) and Richtmyer–Meshkov (RM) instabilities at the pusher–fuel interface in inertial confinement fusion (ICF) targets may significantly degrade thermonuclear burn. Present-day supercomputers may be used to understand the fundamental instability mechanisms and to model the effect of the ensuing mixing on the performance of the ICF target. Direct three-dimensional numerical simulation is used to investigate turbulent mixing due to RT and RM instability in simple situations. A two-dimensional turbulence model is used to assess the effect of small-scale turbulent mixing in the axisymmetric implosion of an idealized ICF target.

Sign in / Sign up

Export Citation Format

Share Document