scholarly journals Evaluating the Mechanical Properties of Fiber Yarns for Developing Synthetic Fiber Chains

2021 ◽  
Author(s):  
Kyeongsoo Kim ◽  
Taewan Kim ◽  
Namhun Kim ◽  
Dokyoun Kim ◽  
Yongjun Kang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Synthetic Fiber

Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties

2021 ◽  
Vol 879 ◽  
pp. 284-293
Author(s):  
Norliana Bakar ◽  
Siew Choo Chin
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Vinyl Ester ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Bamboo Fiber ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Volume Fractions

Fiber Reinforced Polymer (FRP) made from synthetic fiber had been widely used for strengthening of reinforced concrete (RC) structures in the past decades. Due to its high cost, detrimental to the environment and human health, natural fiber composites becoming the current alternatives towards a green and environmental friendly material. This paper presents an investigation on the mechanical properties of bamboo fiber reinforced composite (BFRC) with different types of resins. The BFRC specimens were prepared by hand lay-up method using epoxy and vinyl-ester resins. Bamboo fiber volume fractions, 30%, 35%, 40%, 45% and 50% was experimentally investigated by conducting tensile and flexural test, respectively. Results showed that the tensile and flexural strength of bamboo fiber reinforced epoxy composite (BFREC) was 63.2% greater than the bamboo fiber reinforced vinyl-ester composite (BFRVC). It was found that 45% of bamboo fiber volume fraction on BFREC exhibited the highest tensile strength compared to other BFRECs. Meanwhile, 40% bamboo fiber volume fraction of BFRVC showed the highest tensile strength between bamboo fiber volume fractions for BFRC using vinyl-ester resin. Studies showed that epoxy-based BFRC exhibited excellent results compared to the vinyl-ester-based composite. Further studies are required on using BFRC epoxy-based composite in various structural applications and strengthening purposes.

scholarly journals Heat Deflection Temperature (HDT) Properties of Polypropylene Composite Reinforced Cellulose Microfibrils of Oil Palm Empty Fruit Bunch and Frond

2020 ◽  
Vol 9 (1) ◽  
pp. 8-14
Author(s):  
Wida Banar Kusumaningrum ◽  
Sasa Sofyan Munawar
Keyword(s):  
Mechanical Properties ◽  
Oil Palm ◽  
Initial Temperature ◽  
Natural Fiber ◽  
Plastic Material ◽  
Synthetic Fiber ◽  
Cellulose Microfibrils ◽  
Normal Loading ◽  
Fiber Loading ◽  
Heat Deflection Temperature

Polypropylene composites reinforcing with natural fiber is potentially applied for automotive particularly on interior part design. Those kind of composites were contributed on renewable material, rapid rate biodegradation, and low cost of production compared to synthetic fiber. Furthermore, the mechanical properties including strenghtness, young modulus, and thermal stability have revealed good performance than glass fiber. Fiber which were fibrillated and have high aspect ratio that coresspond to diameter and lenght ratio of the fiber were noticed as enhancement factor for mechanical properties. Fiber fibrillation processing into microfibrillated cellulose (MFC) attempts for widening surface area of the fiber that improve polymer matrices compatibility. MFC from empty fruit bunches (EFB) and oil palm frond (FB) fibers were performed as pulp by mechanically and chemically treatments. Chemically treatment was conducted with bleach and unbleach procedure. Polypropylene with fiber was mixed using kneader, and injection for molding process. Manufacturing uses needs appropriate size presition, moderate lead time, and low defect. Heat deflection temperature (HDT) provide information for plastic material on indicating temperature condition effect to material deformation during normal loading. Material of origin, additive or filler size, and molding temperature were directly corelated to the HDT performance. Initial temperature of HDT exhibits different value for different kind of fillers and fiber treatments. PP/EFB composite by mechanical treatment gives high value of HDT compared to the fiber processing by chemical treatment both with bleach and unbleach process. Similar result have been performed in PP/FB composites related to initial temperature. PP/ EFB composite with 30% of fiber loading represent HDT in 149.4°C, and for PP/ FB composite with 30% fiber loading gives 150.7°C. By the addition of fiber loading could improve the HDT value of the composites.

Investigation of the Mechanical Behavior of Natural Vegetable Fibers Used in Composite Materials for Structural Strengthening

2021 ◽  
Vol 888 ◽  
pp. 15-21
Author(s):  
Ivelina Ivanova ◽  
Jules Assih ◽  
Dimitar Dontchev
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Fiber Composite ◽  
Low Cost ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Engineering Structures ◽  
Hemp Fiber ◽  
Plant Fibers ◽  
Hemp Fibers

This research aims at studying the mechanical properties of industrial hemp fibers and promoting their use as a reinforcing composite material for strengthening of civil engineering structures. Natural hemp fibers are of great interest due to the following advantages they have: low cost, high strength-to-weight ratio, low density and non-corrosive properties. The use of plant fiber composite materials has increased significantly in recent years because of the negative reduction impact on the environment. For example, the tendency to use renewable resources and their possibility for recycling. They cause fewer health and environmental problems than synthetic fibers. Natural fibers, in addition to environmental aspects, have advantages such as low densities, i.e. have low weight, interesting mechanical properties comparable to those of synthetic fiber materials, and last but not least, low cost. Composites based on natural plant fibers can be used to reinforce or repair reinforced concrete structures, as shown by research on flax fiber composites. These concretes specimens strengthened with biocomposite materials have very good resistance to bending and significantly increase the rigidity of the structure. The results show that the hemp fiber reinforcement has significant effects on the strengthening and increase in flexural strength from 8% to 35 %.

Non-Wood Lignocellulosic Composites

2014 ◽  
pp. 281-319 ◽  
Author(s):  
Marius C. Barbu ◽  
Roman Reh ◽  
Ayfer Dönmez Çavdar
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Experimental Studies ◽  
Raw Material ◽  
Synthetic Fiber ◽  
Plant Fibers ◽  
Labor Conditions ◽  
Appropriate Treatment ◽  
Manufacturing Technologies ◽  
Cellulose Materials

It would seem that with appropriate treatment almost any agricultural residue may be used as a suitable raw material for the wood-based panels like particle- and fiberboard production. The literature on wood-ligno-cellulose plant composite boards highlights steady interest for the design of new structures and technologies towards products for special applications with higher physical-mechanical properties at relatively low prices. Experimental studies have revealed particular aspects related to the structural composition of ligno-cellulose materials, such as the ratio between the different composing elements, their compatibility, and the types and characteristics of the used resins. Various technologies have been developed for designing and processing composite materials by pressing, extrusion, airflow forming, dry, half-dry, and wet processes, including thermal, chemical, thermo-chemical, thermo-chemo-mechanical treatments, etc. Researchers have undertaken to determine the manufacturing parameters and the physical-mechanical properties of the composite boards and to compare them with the standard PB, MDF, HB, SB made from single-raw material (wood). A great emphasis is placed on the processability of the ligno-cellulose composite boards by classical methods, by modified manufacturing processes, on the types of tools and processing equipment, the automation of the manufacturing technologies, the specific labor conditions, etc. The combinations of wood and plant fibers are successful, since there is obvious compatibility between the macro- and microscopic structures, their chemical composition, and the relatively low manufacturing costs and high performances, as compared to synthetic fiber-based composite materials.

Preparation and Mechanical Characterization of Jute-PP and Coir-PP Bio-Composites

2015 ◽  
Vol 766-767 ◽  
pp. 122-132
Author(s):  
Tippusultan ◽  
V.N. Gaitonde
Keyword(s):  
Mechanical Properties ◽  
Research Work ◽  
Natural Fibers ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Synthetic Fibers ◽  
Fiber Loading ◽  
High Initial Cost ◽  
Full Factorial

Polymers reinforced with synthetic fibers such as glass and carbon offer advantages of high stiffness and strength to weight ratio compared to conventional materials. Despite these advantages, the prevalent use of synthetic fiber-reinforced polymer composite has a tendency to demur because of high initial cost and most importantly their adverse environmental impact. On the contrary, the increased interest in using natural fibers as reinforcement in plastics to substitute conventional synthetic fibers in automobile applications has become one of the main concerns to study the potential of using natural fibers as reinforcement for polymers. In this regard, an investigative study has been carried out to make potential utilization of natural fibers such as Jute and Coir as reinforcements, which are cheap and abundantly available in India. The objective of the present research work is to study the effects of fiber loading and particle size; fiber loading and fiber length on the mechanical properties of Jute-PP and Coir-PP bio-composites respectively. The experiments were planned as per full factorial design (FFD) and response surface methodology (RSM) based second order mathematical models of mechanical properties have been developed. Analysis of variance (ANOVA) has been employed to check the adequacy of the developed models. From the parametric analysis, it is revealed that Jute-PP bio-composites exhibit better mechanical properties when compared to Coir-PP bio-composites.

Experimental Investigation on Mechanical Properties of Hemp-Banana-Glass Fiber Reinforced Composites

2015 ◽  
Vol 766-767 ◽  
pp. 167-172 ◽  
Author(s):  
R. Bhoopathi ◽  
C. Deepa ◽  
G. Sasikala ◽  
M. Ramesh
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Hybrid Composites ◽  
Glass Fibers ◽  
Sem Analysis ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Fiber Failure ◽  
Morphological Studies ◽  
Reinforced Composite

Due to desirable properties and its role of natural and manmade fibers reinforced composite materials are growing in a faster rate in the field of engineering and technology. Now-a-days the treated natural composites are serves better in terms of corrosive resistance, and other desirable properties when compared to the traditional materials. The main aim of this experimental study is to fabricate and investigate the mechanical properties such as tensile strengths, flexural strengths and impact strengths of NaOH treated and hemp-banana-glass fibers reinforced hybrid composites. From the experimental results, it has been noted that the treated hemp-banana-glass fibers reinforced hybrid epoxy composites exhibited superior properties and used as an alternate material for synthetic fiber reinforced composite materials. Morphological studies are carried out to analyze the interfacial characteristics, internal structures, fiber failure mode and fractured surfaces by using scanning electron microscopy (SEM) analysis.

Application of Oil Palm Empty Fruit Bunch Fiber to Improve the Physical and Mechanical Properties of Composite Railway Brake Block Materials

2013 ◽  
Vol 651 ◽  
pp. 486-491 ◽  
Author(s):  
Triono Agus ◽  
Wiratmaja Puja Ign ◽  
Hilman Syaeful Alam ◽  
S. Rochim
Keyword(s):  
Mechanical Properties ◽  
Oil Palm ◽  
Natural Fiber ◽  
Physical And Mechanical Properties ◽  
Synthetic Fiber ◽  
Technical Requirement ◽  
Commercial Sample ◽  
Environment Friendly ◽  
Synthetic Fibers ◽  
Brake Block

One of the natural fiber considered to replace syntetic fiber is Oil Palm Empty Fruit Bunches (OPEFB) fiber which offer advantages such as environment friendly and widely available especially in indonesia . This study investigates the characteristics of railway brake block with OPEFB fibres compare to synthetic fiber. All the test results were compared to the technical requirement of PT. Kereta Api Indonesia (PT. KAI ) and evaluated using Extension Evaluation Method (EEM) to select and get the best sample. From the evaluation results using EEM, one of non commercial sample using OPEFB fiber give a better results compare to commercial sample using synthetic fibers. So it can be concluded that OPEFB fiber as reinforcement for railway brake material could improve physical and mechanical properties of the material, environment friendly and could replace synthetic fibers.

scholarly journals SCOPE OF IMPROVING MECHANICAL CHARACTERISTICS OF CONCRETE USING NATURAL FIBER AS A REINFORCING MATERIAL

2020 ◽  
Vol 32 (2) ◽  
Author(s):  
Sristi Das Gupta ◽  
MD Shahnewaz Aftab ◽  
Hasan Mohammod Zakaria ◽  
Chaity Karmakar
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Reinforced Concrete ◽  
Fiber Reinforced Concrete ◽  
Synthetic Fiber ◽  
Jute Fiber ◽  
Fiber Reinforced ◽  
Plastic Shrinkage ◽  
Shrinkage Cracks ◽  
Reinforcing Material

Using natural (Jute) fiber in concrete as a reinforcing material can not only augment the concrete strength but also restrict the use of synthetic fiber which is environmentally detrimental. To achieve this goal, this study evaluated compressive strength, tensile strength and plastic shrinkage of concrete incorporating ‘Natural (Jute)’ fiber of different length (15 mm and 25 mm) with various mix proportions of 0.10%, 0.2%, 0.3% and 0.4% respectively by volume of concrete. Concrete is vulnerable to grow shrinkage cracks because of high evaporation rate in dry and windy conditions. Incorporating of fibers could abate development of this crack. The large length (25 mm) and higher content ( 0.3%) of reinforcing materials (jute fiber) result to the lowering of mechanical properties of JFRC compare to plain concrete. But in the incorporation of short (15 mm) and low fiber content ( 0.3%), enhances the mechanical properties of the same JFRC. Inclusion of 0.3% (15 mm length) fiber gave maximum enhancement of both concrete compressive and tensile strength by 12.4% and 58% respectively compared to the non-fiber reinforced concrete. A drastic suppression of crack occurrence and area of crack between non-fiber reinforced concrete and fiber reinforced concretes was attained. Experimental results of incorporating 0.1–0.4% fiber with 15 mm length in concrete revealed that plastic shrinkage cracks were decreased by 75–99% in contrast to non-fiber reinforced concrete. Therefore, it is concluded that the incorporation of jute fiber in making FRC composite would be one of the favorable methods to enhance the performance of concrete.

scholarly journals Mechanical Properties of Banana Fabric and Kenaf Fiber Reinforced Epoxy Composites: Effect of Treatment and Hybridization

2019 ◽  
Vol 8 (10) ◽  
pp. 1870-1874
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Reinforced Composites ◽  
Synthetic Fiber ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite

Nowadays, Natural Fiber Reinforced composites (NFCs) are emerging to be a good substitute for synthetic fiber reinforced composites as NFCs have many advantages such as low density, high specific strength, recyclability, low cost and good sound abatement quality etc. Among all types of NFCs, a vast study has been done on banana fiber and kenaf fiber reinforced composite. However, only limited work has been done on the banana fabric, kenaf fiber reinforced composite and the effect of their hybridization on mechanical properties. In this paper, an attempt has been made to study the mechanical properties of the banana fabric, kenaf fiber and hybrid banana fabric/kenaf fiber reinforced composites. Effect of alkali treatment on kenaf fiber reinforced composite is discussed in the paper. For the present work, plain-woven banana fabric and randomly oriented kenaf fiber are used as reinforcement while the epoxy resin is used as a matrix. samples are fabricated using hand lay-up and vacuum bagging method. Curing is done at ambient temperature (250C-300C) for 48h. Tensile, impact and hardness test has been performed on a specimen according to ASTM standards. Improvement in mechanical properties is observed after alkali (6% NaOH) treatment on kenaf fiber reinforced composite. Tensile testing behavior of randomly oriented kenaf fiber composite has been studied using Finite element method and results are compared with experimental investigations. This topic present big potential because it seeks to find solution for sustainable development with environmental concerns.

scholarly journals A Proposal for the Numerical and Experimental Evaluation of Temperature Rise in Synthetic and Hybrid Ropes Used in AHC Systems and Methods of Lessening the Effect

2017 ◽  
Author(s):  
Bamdad Pourladian ◽  
John Groce
Keyword(s):  
Heat Transfer ◽  
Mechanical Properties ◽  
Experimental Evaluation ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Transfer Rates ◽  
Commercial Activities ◽  
Tension Member ◽  
Dynamic Loading Conditions ◽  
Tension Members

Recent commercial activities in the deeper regions of seas and oceans have placed increasing demands for higher strength-to-weight ratio tension members with certain improved mechanical properties. Activities such as heavy lifting in subsea regions can impose extreme dynamic loading conditions as well as other environmental factors on ropes used as tension members for those applications. In this paper, some recently developed synthetic fiber and hybrid tension member technologies that may provide solutions for some of these challenging needs are presented. A proposal for a hybrid rope concept is presented which is envisioned to provide for more effective cooling of the rope in high cycle bending applications such as active heave compensated winches. A proposal for numerical modeling and experimental evaluation of heat transfer rates in such a hybrid rope is briefly presented. A short overview of the current ASME B30 standard volumes for land-based crane rope usage and inspection, as well as ISO 4309 and the API 2D standards will also be presented. Paper published with permission.

Sign in / Sign up

Export Citation Format

Share Document