Time-dependent behaviour of concrete

2021 ◽  
pp. 13-40
Author(s):  
Gianluca Ranzi ◽  
Giovanni Di Luzio ◽  
Massimiliano Bocciarelli ◽  
Graziano Leoni ◽  
Ahmet Abdullah Dönmez ◽  
...  
Keyword(s):  
Composite Structures ◽  
Constitutive Models ◽  
Design Guidelines ◽  
Effective Modulus ◽  
Time Dependent ◽  
Algebraic Methods ◽  
Modulus Method ◽  
Time Dependent Behaviour ◽  
Creep And Shrinkage ◽  
Dependent Behaviour

<p>This chapter provides an introduction to the constitutive models commonly specified in design guidelines to describe the time-dependent behaviour of concrete and that can be used for the time-dependent analysis of composite structures. These formulations range from the simplest algebraic methods, such as the Effective Modulus Method that is widely recommended in design guidelines, to more sophisticated approaches that can account for creep and shrinkage effects in advanced modelling. The last part of the chapter provides a brief overview of multi-physics modelling that could be useful in predicting the concrete time-dependent response for composite construction.</p>

Introduction

2021 ◽  
pp. 1-12
Author(s):  
Gianluca Ranzi ◽  
Raymond Ian Gilbert ◽  
Graziano Leoni ◽  
Luigino Dezi ◽  
Alejandro Pérez Caldentey ◽  
...  
Keyword(s):  
Composite Structures ◽  
Constitutive Models ◽  
Design Guidelines ◽  
Effective Modulus ◽  
Time Dependent ◽  
Algebraic Methods ◽  
Modulus Method ◽  
Time Dependent Behaviour ◽  
Creep And Shrinkage ◽  
Dependent Behaviour

<p>This chapter provides an introduction to the constitutive models commonly specified in design guidelines to describe the time-dependent behaviour of concrete and that can be used for the time-dependent analysis of composite structures. These formulations range from the simplest algebraic methods, such as the Effective Modulus Method that is widely recommended in design guidelines, to more sophisticated approaches that can account for creep and shrinkage effects in advanced modelling. The last part of the chapter provides a brief overview of multi-physics modelling that could be useful in predicting the concrete time-dependent response for composite construction.</p>

Time-dependent behaviour and design of composite steel-concrete structures

2021 ◽  
Keyword(s):  
Composite Structures ◽  
Service Design ◽  
Design Guidelines ◽  
Time Dependent ◽  
Background Information ◽  
Design Procedures ◽  
Design Engineers ◽  
Time Dependent Behaviour ◽  
Dependent Behaviour ◽  
Insight Into

<p>Steel-concrete composite structures are widely used throughout the world for buildings and bridges. A distinguishing feature of this form of construction is the combination of concrete and steel components to achieve enhanced structural performance. <p>The time-dependent response of concrete and its infl uence on the service behaviour and design of composite structures are the main focus of this SED. For the fi rst time, a publication combines a state-of-the-art review of the research with the available design specifi cations of Europe, Australia and New Zealand, and USA. This publication intends to enhance the awareness of the service response of composite structures and of the latest research and standards’ developments. It is aimed at designers and researchers alike. <p>The review of research available in open literature is provided and arranged according to structural typologies, i. e. slabs, beams, and columns. It serves as background information for current service design rules and provides insight into the most recent research advancements. The review of available design guidelines presents the similarities and differences of the recommended service design procedures infl uenced by concrete time effects. Selected case studies of building and bridge projects show possible design approaches and the rationale required when dealing with the time-dependent response and design of composite structures. The authors of this publication are design engineers and academics involved in the service design and research on the time-dependent response of composite structures.

Application of shotcrete constitutive model to the time dependent behavior of TBM tunnel lining

2018 ◽  
Vol 7 (3) ◽  
pp. 1826
Author(s):  
Heyam H. Shaalan ◽  
Mohd Ashraf Mohamad Ismail ◽  
Romziah Azit
Keyword(s):  
Constitutive Model ◽  
Steel Fibre ◽  
Tunnel Lining ◽  
Time Dependent ◽  
Elastic Behaviour ◽  
Elastic Analysis ◽  
Time Dependent Behaviour ◽  
Shotcrete Lining ◽  
Creep And Shrinkage ◽  
Dependent Behaviour

Shotcrete is ordinary concrete applied to the surface under high pressure. It demonstrates a highly time-dependent behaviour after few hours of application. Traditional approaches assume a simple linear elastic behaviour using a hypothetical young modulus to investigate the time-dependency and creep effects. In this paper, a new constitutive model of shotcrete is applied to evaluate the time-dependent behaviour of a TBM tunnel lining and investigate the parameters that can influence this behaviour. The Shotcrete model is based on the framework of Elasto-plasticity and designed to model shotcrete linings more realistically. The basic data of Pahang-Selangor Raw Water Transfer Project is used for the analysis study. An attempt is made to investigate the influence of some input parameters of the shotcrete model on the time-dependent behaviour of the shotcrete lining. These parameters include the time-dependent stiffness/strength parameters, creep and shrinkage parameters and steel fibre parameters. The variation in shotcrete strength classes causes a noticeable influence on the development of shotcrete compressive strength with time, particularly during the first days of application. The creep and shrinkage strain cause a considerable reduction in the development of the shotcrete stress with time. The impact of steel fibre content is determined, and the result indicated that the development of plain shotcrete stresses with time is lower than that of the reinforced shotcrete. In addition, a comparison study is performed to analyse the tunnel lining behaviour using both shotcrete model and an elastic analysis. Significant differences in shotcrete lining stresses are achieved when using the elastic analysis while the shotcrete model results in a reasonable result that can be used for the design requirements. 

scholarly journals ANALYSIS OF THE TIME‐DEPENDENT BEHAVIOUR OF COMPOSITE CROSS‐SECTIONS BY LAPLACE‐TRANSFORM

2005 ◽  
Vol 11 (3) ◽  
pp. 203-209
Author(s):  
Erich Raue ◽  
Thorsten Heidolf
Keyword(s):  
Laplace Transform ◽  
Cross Sections ◽  
Composite Structures ◽  
Time Dependent ◽  
Time Interval ◽  
Final State ◽  
Long Time ◽  
Time Dependent Behaviour ◽  
Linear Differential ◽  
Dependent Behaviour

Composite structures consisting of precast and cast in‐situ concrete elements are increasingly common. These combinations demand a mechanical model which takes into account the time‐dependent behaviour and analysis of the different ages of the connected concrete components. The effect of creep and shrinkage of the different concrete components can be of relevance for the state of serviceability, as well as for the final state. The long‐time behaviour of concrete can be described by the rate‐of‐creep method, combined with a discretisation of time. The internal forces are described for each time interval using a system of linear differential equations, which can be solved by Laplace‐transform.

Time-dependent behaviour of structural concrete made with recycled coarse aggregates. Creep and shrinkage

2016 ◽  
Vol 122 ◽  
pp. 95-109 ◽  
Author(s):  
Sindy Seara-Paz ◽  
Belén González-Fonteboa ◽  
Fernando Martínez-Abella ◽  
Iris González-Taboada
Keyword(s):  
Time Dependent ◽  
Structural Concrete ◽  
Coarse Aggregates ◽  
Time Dependent Behaviour ◽  
Creep And Shrinkage ◽  
Dependent Behaviour

scholarly journals Time-dependent Behaviour Analysis of Long-span Concrete Arch Bridge

2019 ◽  
Vol 14 (2) ◽  
pp. 227-248
Author(s):  
Yongbao Wang ◽  
Renda Zhao ◽  
Yi Jia ◽  
Ping Liao
Keyword(s):  
Concrete Structures ◽  
Time Dependent ◽  
Mean Deviation ◽  
Concrete Creep ◽  
Arch Bridge ◽  
Model Code ◽  
Time Dependent Behaviour ◽  
Creep And Shrinkage ◽  
Dependent Behaviour

This paper continues the previous study on clarifying the time-dependent behaviour of Beipanjiang Bridge ‒ a reinforced concrete arch bridge with concrete-filled steel tubular stiffened skeleton. The obtained prediction models and the Finite Element Models were used to simulate the long-term behaviour and stress redistribution of the concrete arch bridge. Three-dimensional beam elements simulated the stiffened skeleton and surrounding concrete. Then, a parameters study was carried out to analyse the time-dependent behaviour of the arch bridge influenced by different concrete creep and shrinkage models. The simulation results demonstrate that concrete creep and shrinkage have a significant influence on the time-dependent behaviour of the concrete arch bridge. After the bridge completion, the Comite Euro-International du Beton mean deviation of displacements obtained by 1990 CEBFIP Model Code: Design Code model and fib Model Code for Concrete Structures 2010 model are 3.4%, 31.9% larger than the results predicted by the modified fib Model Code for Concrete Structures 2010 model. The stresses between the steel and the concrete redistribute with time because of the concrete long-term effect. The steel will yield if the fib Model Code for Concrete Structures 2010 model is used in the analysis. The stresses in a different part of the surrounding concrete are non-uniformly distributed.

scholarly journals Modelling the time-dependent behaviour of soft soils

2020 ◽  
Vol 42 (2) ◽  
pp. 97-110
Author(s):  
Katarzyna Staszewska ◽  
Marcin Cudny
Keyword(s):  
Time Dependence ◽  
Constitutive Models ◽  
Time Dependent ◽  
Organic Soils ◽  
Soft Soils ◽  
Practical Applications ◽  
Rate Dependent ◽  
Time Dependent Behaviour ◽  
Basic Equations ◽  
Dependent Behaviour

AbstractTime dependence of soft soils has already been thoroughly investigated. The knowledge on creep and relaxation phenomena is generally available in the literature. However, it is still rarely applied in practice. Regarding the organic soils, geotechnical engineers mostly base their calculations on the simple assumptions. Yet, as presented within this article, the rate-dependent behaviour of soft soils is a very special and important feature. It influences both the strength and the stiffness of a soil depending on time. It is, thus, significant to account for time dependence in the geotechnical design when considering the soft soils. This can result in a more robust and economic design of geotechnical structures. Hence, the up-to-date possibilities of regarding creep in practice, which are provided by the existing theories, are reviewed herein.In this article, we first justify the importance of creep effects in practical applications. Next, we present the fundamental theories explaining the time-dependent behaviour of organic soils. Finally, the revision of the existing constitutive models that can be used in numerical simulations involving soft soils is introduced. Both the models that are implemented in the commercial geotechnical software and some more advanced models that take into account further aspects of soft soils behaviour are revised. The assumptions, the basic equations along with the advantages and the drawbacks of the considered models are described.

scholarly journals Application of micro-computer tomography and inverse finite element analysis for characterizing the visco-hyperelastic response of bulk liver tissue using indentation

2021 ◽  
Vol 3 (5) ◽  
Author(s):  
Rajeswara R. Resapu ◽  
Roger D. Bradshaw
Keyword(s):  
Finite Element ◽  
Liver Tissue ◽  
Loading Rate ◽  
Time Dependent ◽  
Nonlinear Material ◽  
Computational Time ◽  
List Type ◽  
Prony Series ◽  
Time Dependent Behaviour ◽  
Dependent Behaviour

Abstract In-vitro mechanical indentation experimentation is performed on bulk liver tissue of lamb to characterize its nonlinear material behaviour. The material response is characterized by a visco-hyperelastic material model by the use of 2-dimensional inverse finite element (FE) analysis. The time-dependent behaviour is characterized by the viscoelastic model represented by a 4-parameter Prony series, whereas the large deformations are modelled using the hyperelastic Neo-Hookean model. The shear response described by the initial and final shear moduli and the corresponding Prony series parameters are optimized using ANSYS with the Root Mean Square (RMS) error being the objective function. Optimized material properties are validated using experimental results obtained under different loading histories. To study the efficacy of a 2D model, a three dimensional (3D) model of the specimen is developed using Micro-CT of the specimen. The initial elastic modulus of the lamb liver obtained was found to 13.5 kPa for 5% indentation depth at a loading rate of 1 mm/sec for 1-cycle. These properties are able to predict the response at 8.33% depth and a loading rate of 5 mm/sec at multiple cycles with reasonable accuracy. Article highlights The visco-hyperelastic model accurately models the large displacement as well as the time-dependent behaviour of the bulk liver tissue. Mapped meshing of the 3D FE model saves computational time and captures localized displacement in an accurate manner. The 2D axisymmetric model while predicting the force response of the bulk tissue, cannot predict the localized deformations.

Sign in / Sign up

Export Citation Format

Share Document