scholarly journals PERANCANGAN PILOT PLANT PENGOLAHAN AIR MINUM UNTUK ZONA PENDIDIKAN DAN RISET KAWASAN TECHNO PARK, KABUPATEN PELALAWAN

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Taty Hernaningsih
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Water Supply ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Water Source ◽  
Regional Competitiveness ◽  
Human Needs ◽  
Supply Planning

Techno Park regional development in order to increase regional competitiveness based on innovation and knowledge (konwledge based economy) requires infrastructure that can meet basic human needs, such as drinking water supply for the community. Techno Park region Pelalawan, Riau province located in the peat so that most of the water source is brownish and contains peat. While surface water sources such as rivers Kampar located far from the region. Therefore, to overcome the problems of water supply for the people who will live in the region need to be prepared water supply planning. Early stages of development is focused on the areas of education and research zone so that planning for water supply will also be prioritized in both these zones. Has calculated the drinking water needs based on projected population and  water demand standard in these locations. Planning of water treatment plant will conduct  in  5 stages yearly so that development is more economic with design capacity of 5 l / sec in 2033. Alternative sources of raw water are from Kampar river or groundwater that is used if transmission pipeline from the Kapuas river has not ben constructed. Technology of drinking water treatment with ultrafiltration processes that are environmentally friendly will be applied to meet the water needs of society. Transmission pipelines is planned of 15 inches diameter laying in parallel with lane highway from Kampar River ( location intake BPAB ) to the water treatment plant in the education zone . Keywords : Techno park region, water supply planning, ultrafiltrasi, peat area.

Experiences with the practical implementation and operation of biological nitrification for a small-scale drinking water treatment plant

2016 ◽  
Vol 16 (4) ◽  
pp. 922-930 ◽  
Author(s):  
L. Richard ◽  
E. Mayr ◽  
M. Zunabovic ◽  
R. Allabashi ◽  
R. Perfler
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Water Supply ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Drinking Water Supply ◽  
Small Scale ◽  
Treatment Performance ◽  
Biological Nitrification

The implementation and evaluation of biological nitrification as a possible treatment option for the small-scale drinking water supply of a rural Upper Austrian community was investigated. The drinking water supply of this community (average system input volume: 20 m3/d) is based on the use of deep anaerobic groundwater with a high ammonium content of geogenic origin (up to 5 mg/l) which must be treated to prevent the formation of nitrites in the drinking water supply system. This paper describes the implementation and operation of biological nitrification despite several constraints including space availability, location and financial and manpower resources. A pilot drinking water treatment plant, including biological nitrification implemented in sand filters, was designed and constructed for a maximum treatment capacity of 1.2 m3/h. Online monitoring of selected physicochemical parameters has provided continuous treatment performance data. Treatment performance of the plant was evaluated under standard operation as well as in the case of selected malfunction events.

scholarly journals Occurrence of titanium dioxide nanoparticle in Taihu Lake (China) and its removal at a full-scale drinking water treatment plant

2021 ◽  
Author(s):  
Zhiyuan Liu ◽  
Min Rui ◽  
Shuili Yu
Keyword(s):  
Drinking Water ◽  
Titanium Dioxide ◽  
Water Treatment ◽  
Taihu Lake ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Water Source ◽  
Full Scale ◽  
Titanium Dioxide Nanoparticle

Abstract The occurrence of titanium dioxide nanoparticle (TNP), an emerging contaminant, in Taihu Lake of China was investigated. Ti was present at a concentration of 224 ± 59 µg/L in the water source of east Taihu Lake. Approximately 0.19% of the Ti-containing matter was at the nano-scale. Scanning Electron Microscope analysis verified the existence of Ti-containing components, such as TiOX and FeTiOX. Furthermore, Ti K-edge X-ray absorption near-edge structure spectroscopy was used to detect the phase composition of nano-scaled Ti-containing matter. The spectra showed the three characteristic peaks of TiO2 in the samples, suggesting the occurrence of TNP in Taihu Lake. A least-squares linear combination fitting analysis indicated that the TNP concentration in the water source was 0.86 µg/L, with a crystal composition of 0.44 ± 0.1 µg/L amorphous, 0.14 ± 0.03 µg/L anatase and 0.28 ± 0.06 µg/L rutile. The removal performance of the TNP at a full-scale conventional drinking water treatment plant indicated that 58.8% of TNP was removed via coagulation/sediment, sand filtration and disinfection/clear water reservoir. The coagulation/sediment process accounted for approximately 76.6% of the total removed TNP. The finished water contained 0.33 µg/L TNP with a crystal composition of 0.24 ± 0.13 µg/L anatase and 0.09 ± 0.05 µg/L rutile. This study is the first that reported the presence and transport of TNP in a drinking water treatment system.

scholarly journals Co-Occurrence of Microcystins and Taste-and-Odor Compounds in Drinking Water Source and Their Removal in a Full-Scale Drinking Water Treatment Plant

Toxins ◽  
2018 ◽  
Vol 10 (1) ◽  
pp. 26 ◽  
Author(s):  
Lixia Shang ◽  
Muhua Feng ◽  
Xiangen Xu ◽  
Feifei Liu ◽  
Fan Ke ◽  
...  
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Water Source ◽  
Full Scale ◽  
Drinking Water Source ◽  
Taste And Odor ◽  
Odor Compounds

The co-occurrence of cyanotoxins and taste-and-odor compounds are a growing concern for drinking water treatment plants (DWTPs) suffering cyanobacteria in water resources. The dissolved and cell-bound forms of three microcystin (MC) congeners (MC-LR, MC-RR and MC-YR) and four taste-and-odor compounds (geosmin, 2-methyl isoborneol, β-cyclocitral and β-ionone) were investigated monthly from August 2011 to July 2012 in the eastern drinking water source of Lake Chaohu. The total concentrations of microcystins and taste-and-odor compounds reached 8.86 μg/L and 250.7 ng/L, respectively. The seasonal trends of microcystins were not consistent with those of the taste-and-odor compounds, which were accompanied by dominant species Microcystis and Dolichospermum. The fate of the cyanobacteria and metabolites were determined simultaneously after the processes of coagulation/flocculation, sedimentation, filtration and chlorination in the associated full-scale DWTP. The dissolved fractions with elevated concentrations were detected after some steps and the breakthrough of cyanobacteria and metabolites were even observed in finished water. Chlorophyll-a limits at intake were established for the drinking water source based on our investigation of multiple metabolites, seasonal variations and their elimination rates in the DWTP. Not only microcystins but also taste-and-odor compounds should be taken into account to guide the management in source water and in DWTPs.

scholarly journals Adsorption of Carbon Dioxide by Reusing Drinking Water Treatment Plant Sludge

2017 ◽  
Vol 29 (12) ◽  
pp. 2665-2670
Author(s):  
Soleha Mohamat Yusuff ◽  
K.K. Ong ◽  
W.M.Z. Wan Yunus ◽  
A. Fitrianto ◽  
M. Ahmad ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Drinking Water ◽  
Water Treatment ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Drinking Water Treatment Plant ◽  
Water Treatment Plant Sludge

scholarly journals Bacillus purgationiresistans sp. nov., isolated from a drinking-water treatment plant

2012 ◽  
Vol 62 (1) ◽  
pp. 71-77 ◽  
Author(s):  
Ivone Vaz-Moreira ◽  
Vânia Figueira ◽  
Ana R. Lopes ◽  
Alexandre Lobo-da-Cunha ◽  
Cathrin Spröer ◽  
...  
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
16S Rrna ◽  
16S Rrna Gene ◽  
Gene Sequence ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Rrna Gene ◽  
Rrna Gene Sequence

A Gram-positive, aerobic, non-motile, endospore-forming rod, designated DS22T, was isolated from a drinking-water treatment plant. Cells were catalase- and oxidase-positive. Growth occurred at 15–37 °C, at pH 7–10 and with <8 % (w/v) NaCl (optimum growth: 30 °C, pH 7–8 and 1–3 % NaCl). The major respiratory quinone was menaquinone 7, the G+C content of the genomic DNA was 36.5 mol% and the cell wall contained meso-diaminopimelic acid. On the basis of 16S rRNA gene sequence analysis, strain DS22T was a member of the genus Bacillus. Its closest phylogenetic neighbours were Bacillus horneckiae NRRL B-59162T (98.5 % 16S rRNA gene sequence similarity), Bacillus oceanisediminis H2T (97.9 %), Bacillus infantis SMC 4352-1T (97.4 %), Bacillus firmus IAM 12464T (96.8 %) and Bacillus muralis LMG 20238T (96.8 %). DNA–DNA hybridization, and biochemical and physiological characterization allowed the differentiation of strain DS22T from its closest phylogenetic neighbours. The data supports the proposal of a novel species, Bacillus purgationiresistans sp. nov.; the type strain is DS22T ( = DSM 23494T = NRRL B-59432T = LMG 25783T).

Control-design methodology for drinking-water treatment processes

2010 ◽  
Vol 10 (2) ◽  
pp. 121-127 ◽  
Author(s):  
Kim van Schagen ◽  
Luuk Rietveld ◽  
Alex Veersma ◽  
Robert Babuška
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Design Methodology ◽  
Treatment Plant ◽  
Control Design ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Process Characteristics ◽  
Chemical Usage ◽  
Treatment Step

The performance of a drinking-water treatment plant is determined by the control of the plant. To design the appropriate control system, a control-design methodology of five design steps is proposed, which takes the treatment process characteristics into account. For each design step, the necessary actions are defined. Using the methodology for the pellet-softening treatment step, a new control scheme for the pellet-softening treatment step has been designed and implemented in the full-scale plant. The implementation resulted in a chemical usage reduction of 15% and reduction in the maintenance effort for this treatment step. Corrective actions of operators are no longer necessary.

Sign in / Sign up

Export Citation Format

Share Document