A Laboratory Device to Measure the Interfacial Phenomena between Rubber and Rough Surfaces

1999 ◽  
Vol 27 (4) ◽  
pp. 206-226 ◽  
Author(s):  
L. Garro ◽  
G. Gurnari ◽  
G. Nicoletto ◽  
A. Serra
Keyword(s):  
Rough Surfaces ◽  
Computer Software ◽  
Interfacial Phenomena ◽  
New Device ◽  
The Road ◽  
Constant Torque ◽  
Rubber Compounds ◽  
Simple Geometry ◽  
Tangential Forces ◽  
On The Road

Abstract The interfacial phenomena between tread rubber compounds and rough surfaces are responsible for most of the behavior of a tire on the road. A new device was developed for the investigation of these phenomena in the laboratory. The device consists of a fully instrumented road wheel on which a simple geometry specimen is driven. The possibilities offered by this device are to perform tests at constant slip or at constant torque on both wet and dry surfaces, with complex cycles. The machine allows the measurement of slip, tangential forces, and temperature on the specimen, and computer software adds the possibility of applying Fourier analyses on force, road wheel speed, and specimen speed data. Other possibilities offered by the road wheel are to change the road surface, the load on the specimen, and the water rate. The description of a complete experiment is detailed in the paper showing the correlation of data with actual tire performances.

Soft Interfaces

2017 ◽  
Keyword(s):  
Soft Matter ◽  
Capillary Forces ◽  
Soft Material ◽  
Interfacial Phenomena ◽  
Adhesive Tape ◽  
Soft Interfaces ◽  
Lecture Notes ◽  
Lecture Courses

Many of the distinctive and useful phenomena of soft matter come from its interaction with interfaces. Examples are the peeling of a strip of adhesive tape or the coating of a surface or the curling of a fibre via capillary forces or the electrically driven ow along a microchannel, or the collapse of a porous sponge. These interfacial phenomena are distinct from the intrinsic behaviour of a soft material like a gel or a microemulsion. Yet many forms of interfacial phenomena can be understood via common principles valid for many forms of soft matter. Our goal in organizing this school was to give students a grasp of these common principles and their many ramifications and possibilities. The school comprised over fifty 90-minute lectures over four weeks in July 2013. Four four-lecture courses by Howard Stone, Michael Cates, David Nelson, and L. Mahadevan served as an anchor for the program. A number of shorter courses and seminars rounded out the school.This volume presents lecture notes prepared by the speakers and submitted for publication after the school. The lectures are grouped under two main themes: Hydrodynamics and interfaces, and Soft matter.

scholarly journals Interfacial Phenomena and Inclusion Formation Behavior at Early Melting Stages of HCFeCr and LCFeCr Alloys in Liquid Iron

2021 ◽  
Author(s):  
Yong Wang ◽  
Andrey Karasev ◽  
Joo Hyun Park ◽  
Wangzhong Mu ◽  
Pär G. Jönsson
Keyword(s):  
Liquid Iron ◽  
Diffusion Zone ◽  
Early Stage ◽  
Interfacial Phenomena ◽  
Solid Alloy ◽  
Low Carbon ◽  
High Carbon ◽  
Free Zone ◽  
Formation Behavior ◽  
Predetermined Time

AbstractChromium is normally added to liquid alloy in the form of different grades of ferrochromium (FeCr) alloys for the requirement of different alloy grades, such as stainless steels, high Cr cast iron, etc.. In this work, inclusions in two commercially produced alloys, i.e., high-carbon ferrochromium (HCFeCr) and low-carbon ferrochromium (LCFeCr) alloys, were investigated. The FeCr alloy/liquid iron interactions at an early stage were investigated by inserting solid alloy piece into contact with the liquid iron for a predetermined time using the liquid-metal-suction method. After quenching these samples, a diffusion zone between the alloys and the liquid Fe was studied based on the microstructural characterizations. It was observed that Cr-O-(Fe) inclusions were formed in the diffusion zone, FeOx inclusions were formed in the bulk Fe, and an “inclusion-free” zone was detected between them. Moreover, it was found that the HCFeCr was slowly dissolved, but LCFeCr alloy was rapidly melted during the experiment. The dissolution and melting behaviors of these two FeCr alloys were compared and the mechanism of the early-stage dissolution process of FeCr alloys in the liquid Fe was proposed.

scholarly journals Interfacial Aspects of Metal Matrix Composites Prepared from Liquid Metals and Aqueous Solutions: A Review

Metals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1400
Author(s):  
Peter Baumli
Keyword(s):  
Aqueous Solutions ◽  
Physical Properties ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Liquid Metals ◽  
Interfacial Phenomena ◽  
Matrix Composites ◽  
Good Adhesion ◽  
Mechanical And Physical Properties ◽  
The Matrix

The paper reviews the preparation of the different metallic nanocomposites. In the preparation of composites, especially in the case of nanocomposites, interfacial phenomena play an important role. This review summarizes the literature on various interfacial phenomena, such as wettability and reactivity in the case of casting techniques and colloidal behavior in the case of electrochemical and electroless methods. The main contribution of this work lies in the evaluation of collected interfacial phenomena and difficulties in the production of metal matrix composites, for both nano-sized and micro-sized reinforcements. This study can guide the composite maker in choosing the best criteria for producing metal matrix composites, which means a real interface with good adhesion between the matrix and the reinforcement. This criterion results in desirable mechanical and physical properties and homogenous dispersion of the reinforcement in the matrix.

Micro-/nanostructures meet anisotropic wetting: from preparation methods to applications

2020 ◽  
Vol 7 (10) ◽  
pp. 2566-2595 ◽  
Author(s):  
Peng Ge ◽  
Shuli Wang ◽  
Junhu Zhang ◽  
Bai Yang
Keyword(s):  
Interfacial Phenomena ◽  
Preparation Methods ◽  
Recent Advances

Recent advances in the development and application of novel anisotropic wetting interfacial phenomena through the use of unique micro-/nanostructures have been summarized.

Interfacial phenomena in polymer based PTC material

1998 ◽  
Vol 6 (4) ◽  
pp. 275-285
Author(s):  
Gang Yu ◽  
Ming Qiu Zhang ◽  
Han Min Zeng
Keyword(s):  
Interfacial Phenomena
Sign in / Sign up

Export Citation Format

Share Document