scholarly journals Prototype Sistem Monitoring Infus Berbasis IoT (Internet of Things)

2020 ◽  
Vol 4 (2) ◽  
pp. 155-163
Author(s):  
Taufik Akbar ◽  
◽  
Indra Gunawan ◽  

The development of increasingly sophisticated medical science and technology has an impact on the development of science and technology in the field of medical-devices. One of the existing equipment and is often used in hospitals, one of which is an IV. Currently in the world of health, infusion is still controlled manually. Because it takes time if the nurse has to go back and forth throughout the patient room. Not only is it time consuming, but there will be risks if it is too late to treat a patient whose infusion has run out. Technology needs to be used to minimize risks in the medical world, one of which is the application of IoT technology. This study aims to make it easier for nurses to control infusion conditions in real time using the concept of IoT ( the Internet of Things). The method used is the Waterfall method. This research uses hardware consisting of Load Cell with the HX711 module as a weight sensor, NodeMCU V3 as a processor, and Thingspeak Web server as the interface with the user. The results of the measurement of the tool made have an error of 0.25 Gram, sending data to the Thingspeak.com Server requires a good connection for maximum results.

2020 ◽  
Vol 9 (2) ◽  
pp. 136-138 ◽  
Author(s):  
Md. Siddikur Rahman ◽  
Noah C. Peeri ◽  
Nistha Shrestha ◽  
Rafdzah Zaki ◽  
Ubydul Haque ◽  
...  

2013 ◽  
Vol 380-384 ◽  
pp. 2042-2045
Author(s):  
Ming Wei Qin ◽  
Bao Lin Hou ◽  
Ya Jun Liang ◽  
Yuan Cheng Yao

Laboratories of IoT Engineering are occupied an important position in education industry. This paper, with the goal of grasping developing tendency and improving the application ability and combined with the characteristics of the Internet of Things Engineering of Southwest University of Science and Technology (SWUST) which focused on the training of application-oriented talent, proposed the experimental teaching programs of the Internet of Things Engineering and completed the development of experimental teaching platform. Its significance lies: to improve the level of teaching and research, improve the application ability of students, promote students employment, and enhance the competitiveness of the school.


2015 ◽  
Vol 9 (1) ◽  
pp. 256-261 ◽  
Author(s):  
Aiyu Hao ◽  
Ling Wang

At present, hospitals in our country have basically established the HIS system, which manages registration, treatment, and charge, among many others, of patients. During treatment, patients need to use medical devices repeatedly to acquire all sorts of inspection data. Currently, the output data of the medical devices are often manually input into information system, which is easy to get wrong or easy to cause mismatches between inspection reports and patients. For some small hospitals of which information construction is still relatively weak, the information generated by the devices is still presented in the form of paper reports. When doctors or patients want to have access to the data at a given time again, they can only look at the paper files. Data integration between medical devices has long been a difficult problem for the medical information system, because the data from medical devices lack mandatory unified global standards and have outstanding heterogeneity of devices. In order to protect their own interests, manufacturers use special protocols, etc., thus causing medical devices to still be the "lonely island" of hospital information system. Besides, unfocused application of the data will lead to failure to achieve a reasonable distribution of medical resources. With the deepening of IT construction in hospitals, medical information systems will be bound to develop toward mobile applications, intelligent analysis, and interconnection and interworking, on the premise that there is an effective medical device integration (MDI) technology. To this end, this paper presents a MDI model based on the Internet of Things (IoT). Through abstract classification, this model is able to extract the common characteristics of the devices, resolve the heterogeneous differences between them, and employ a unified protocol to integrate data between devices. And by the IoT technology, it realizes interconnection network of devices and conducts associate matching between the data and the inspection with the terminal device in a timely manner.


2018 ◽  
Author(s):  
Henry Tranter

Security is always at the forefront of developing technologies. One can seldom go a week without hearing of a new data breach or hacking attempt from various groups around the world, often taking advantage of a simple flaw in a system’s architecture. The Internet of Things (IoT) is one of these developing technologies which may be at risk of such attacks. IoT devices are becoming more and more prevalent in everyday life. From keeping track of an individual’s health, to suggesting meals from items available in an individual’s fridge, these technologies are taking a much larger role in the personal lives of their users. With this in mind, how is security being considered in the development of these technologies? Are these devices that monitor individual’s personal lives just additional vectors for potential data theft? Throughout this survey, various approaches to the development of security systems concerning IoT devices in the home will be discussed, compared, and contrasted in the hope of providing an ideal solution to the problems this technology may produce.


2018 ◽  
Author(s):  
Henry Tranter

Security is always at the forefront of developing technologies. One can seldom go a week without hearing of a new data breach or hacking attempt from various groups around the world, often taking advantage of a simple flaw in a system’s architecture. The Internet of Things (IoT) is one of these developing technologies which may be at risk of such attacks. IoT devices are becoming more and more prevalent in everyday life. From keeping track of an individual’s health, to suggesting meals from items available in an individual’s fridge, these technologies are taking a much larger role in the personal lives of their users. With this in mind, how is security being considered in the development of these technologies? Are these devices that monitor individual’s personal lives just additional vectors for potential data theft? Throughout this survey, various approaches to the development of security systems concerning IoT devices in the home will be discussed, compared, and contrasted in the hope of providing an ideal solution to the problems this technology may produce.


2020 ◽  
Vol 7 (1) ◽  
pp. 22-28
Author(s):  
Vladimir Eliseev ◽  
Anastasiya Gurina

  Abstract— The paper investigates the causes of widespread use by cybercriminals of the Internet of Things for organizing network attacks and other illegal use. An analysis of existing approaches and technologies for protecting networked computer devices is presented, as well as the main factors that prevent their use in the world of Internet of Things. An approach is suggested that ensures the integration of protective mechanisms directly into the composition of Things. Various variants of technology implementation are considered. Key aspects and potential ways of implementing the proposed approach are noted.Tóm tắt— Bài báo nghiên cứu về các phương thức được tội phạm mạng sử dụng rộng rãi trong Internet vạn vật (IoT), để tổ chức các tấn công mạng và các hành vi bất hợp pháp khác. Bài báo phân tích các phương pháp và công nghệ hiện có để bảo vệ các thiết bị kết nối mạng, cũng như các yếu tố chính để ngăn chặn việc sử dụng chúng trong IoT. Cách tiếp cận được đề xuất là đảm bảo việc tích hợp các cơ chế bảo vệ trực tiếp vào cấu trúc của IoT. Bài báo cũng xem xét các biến thể khác của việc thực hiện công nghệ này. Từ đó, đưa ra lưu ý về các khía cạnh chính và cách thức cài đặt tiềm năng để thực hiện phương pháp được đề xuất. 


2022 ◽  
pp. 168-180
Author(s):  
Sasikumar Gurumoorthy ◽  
L. Venkateswara Reddy ◽  
Sudhakaran Periakaruppan

Art colonnades and museums all over the world are the first option for individuals to visit for the enhancement of the cultural life of people. To ensure their safety, museums have established numerous cultural security measures. Traditional strategies do not obstruct their pace entirely. They only use a computer in the museum to check individuals at the entrance and exit. Therefore, the authors proposed a gallery anti-stealing device created on the internet-of-things (IoT) technology that ensures security through passive readers/writers of RFID. Radio frequency identification (RFID) remains a system that practices isolated data storing and recovery and offers object tracking with a unique identity code. The system then sends sound and light warning information, while the photographic camera structure is triggered to capture a picture at the same time. The recognition of the accuracy in the hardware component of the device can be additionally enhanced by the use of this technology to increase the safety of museum equipment.


Author(s):  
Yusuf Perwej ◽  
Firoj Parwej ◽  
Mumdouh Mirghani Mohamed Hassan ◽  
Nikhat Akhtar

Recent years have seen the swift development and deployment of Internet-of-Things (IoT) applications in a variety of application domains. In this scenario, people worldwide are now ready to delight the benefits of the Internet of Things (IoT). The IoT is emerging as the third wave in the evolution of the Internet. The 1990s’ Internet wave connected 1.2 billion subscribers while the 2000s’ mobile wave connected another 2.4 billion. Actually, IoT is expected to consist of more than 84 billion connected devices generating 186 zettabyte of data by 2025, in the opinion of IDC. It includes major types of networks, such as distributed, ubiquitous, grid, and vehicular, these have conquered the world of information technology over a decade. IoT is growing fast across several industry verticals along with increases in the number of interconnected devices and diversify of IoT applications. In spite of the fact that, IoT technologies are not reaching maturity yet and there are many challenges to overcome. The Internet of Things combines actual and virtual anywhere and anytime, fascinate the attention of both constructor and hacker. Necessarily, leaving the devices without human interference for a long period could lead to theft and IoT incorporates many such things. In this paper, we are briefly discussing technological perspective of Internet of Things security. Because, the protection was a major concern when just two devices were coupled. In this context, security is the most significant of them. Today scenario, there are millions of connected devices and billions of sensors and their numbers are growing. All of them are expected secure and reliable connectivity. Consequently, companies and organizations adopting IoT technologies require well-designed security IoT architectures.


Author(s):  
Robert Cerna Duran ◽  
◽  
Brian Meneses Claudio ◽  
Alexi Delgado

The increase in garbage production today is due to the exponential growth of the population worldwide, due to the fact that thousands of tons of garbage are generated daily around the world, but the mismanagement that gives them has become an environmental problem since 33% of all the garbage generated is not recycled, for that reason it is estimated that within the next three decades the amount of waste worldwide will increase to 70%. That is why in the present research work it is proposed to make an intelligent system based on the Internet of Things (IoT) that allows monitoring the garbage containers in real time representing with percentages the state of these containers and these can be collected in time by garbage trucks, and thus avoid the increase of garbage in the streets and the various types of problems that these would cause. As a result, it was obtained that the System does comply with the established conditions because it allows to monitor in real time representing by percentages the state of the garbage container, which indicates 40% as almost full and 80% indicates that it is already available for collection. Finally, it is concluded that using the Garbage Container Monitoring System will allow to better optimize the collection process and, in addition, the problems that are usually perceived today due to the amount of garbage that are registered in the streets will decrease. Keywords-- Internet of Things; Intelligent system; Real time; Environmental Problem; Monitoror; Percentage.


Sign in / Sign up

Export Citation Format

Share Document