scholarly journals Research on the geometric errors identification of rotary axes on the five-axis machine tool

2016 ◽  
Author(s):  
Jinwei Fan ◽  
Haohao Tao ◽  
Qi Lv ◽  
Kaikai Liu
Keyword(s):  
Machine Tool ◽  
Geometric Errors ◽  
Rotary Axes ◽  
Five Axis

Highly efficient and accurate calibration method for the position-dependent geometric errors of the rotary axes of a five-axis machine tool

2020 ◽  
Vol 235 (1-2) ◽  
pp. 23-33
Author(s):  
Shijie Guo ◽  
Shufeng Tang ◽  
Gedong Jiang ◽  
Xuesong Mei
Keyword(s):  
Machine Tool ◽  
Calibration Method ◽  
Identification Accuracy ◽  
Geometric Errors ◽  
Identification Process ◽  
Rotary Axes ◽  
Selection Operator ◽  
Lasso Method ◽  
Measurement Efficiency ◽  
Five Axis

This paper proposes a calibration method for continuous measurements with a double ball bar (DBB) used to identify the position-dependent geometric errors (PDGEs) of the rotary axes of five-axis machine tools. The different DBB installation modes for the rotary axes of the spindle and workbench are established, and the same initial DBB installation position is used for multiple tests. This approach minimizes the number of required DBB installations, which increases the measurement efficiency of the PDGEs of the rotary axes and reduces installation errors. PDGEs identification based on the adaptive least absolute shrinkage and selection operator (LASSO) method is proposed. By assigning coefficients to the PDGEs polynomial, the ill-conditioned problem of the identification process can be effectively avoided, thereby improving the identification accuracy. The measurement and identification methods proposed in this paper are verified by experiments on a five-axis machine tool. After compensation, the PDGEs are obviously reduced and the accuracy indexes of the circular trajectory tests performed under multiaxis synchronous control are obviously improved.

Sensitivity Analysis of Geometric Errors for Five-Axis CNC Machine Tool Based on Multi-Body System Theory

2012 ◽  
Vol 271-272 ◽  
pp. 493-497
Author(s):  
Wei Qing Wang ◽  
Huan Qin Wu
Keyword(s):  
System Theory ◽  
Sensitivity Analysis ◽  
Machine Tool ◽  
Geometric Error ◽  
Machining Accuracy ◽  
Geometric Errors ◽  
Body System ◽  
Cnc Machine ◽  
Multi Body ◽  
Five Axis

Abstract: In order to determine that the effect of geometric error to the machining accuracy is an important premise for the error compensation, a sensitivity analysis method of geometric error is presented based on multi-body system theory in this paper. An accuracy model of five-axis machine tool is established based on multi-body system theory, and with 37 geometric errors obtained through experimental verification, key error sources affecting the machining accuracy are finally identified by sensitivity analysis. The analysis result shows that the presented method can identify the important geometric errors having large influence on volumetric error of machine tool and is of help to improve the accuracy of machine tool economically.

Table-Based Volumetric Error Compensation of Large Five-Axis Machine Tools

2016 ◽  
Vol 139 (2) ◽  
Author(s):  
Jennifer Creamer ◽  
Patrick M. Sammons ◽  
Douglas A. Bristow ◽  
Robert G. Landers ◽  
Philip L. Freeman ◽  
...  
Keyword(s):  
Machine Tool ◽  
Error Compensation ◽  
Machine Tools ◽  
Data Gathering ◽  
Measurement Data ◽  
Geometric Error ◽  
Compensation Method ◽  
Geometric Errors ◽  
Simultaneous Generation ◽  
Five Axis

This paper presents a geometric error compensation method for large five-axis machine tools. Compared to smaller machine tools, the longer axis travels and bigger structures of a large machine tool make them more susceptible to complicated, position-dependent geometric errors. The compensation method presented in this paper uses tool tip measurements recorded throughout the axis space to construct an explicit model of a machine tool's geometric errors from which a corresponding set of compensation tables are constructed. The measurements are taken using a laser tracker, permitting rapid error data gathering at most locations in the axis space. Two position-dependent geometric error models are considered in this paper. The first model utilizes a six degree-of-freedom kinematic error description at each axis. The second model is motivated by the structure of table compensation solutions and describes geometric errors as small perturbations to the axis commands. The parameters of both models are identified from the measurement data using a maximum likelihood estimator. Compensation tables are generated by projecting the error model onto the compensation space created by the compensation tables available in the machine tool controller. The first model provides a more intuitive accounting of simple geometric errors than the second; however, it also increases the complexity of projecting the errors onto compensation tables. Experimental results on a commercial five-axis machine tool are presented and analyzed. Despite significant differences in the machine tool error descriptions, both methods produce similar results, within the repeatability of the machine tool. Reasons for this result are discussed. Analysis of the models and compensation tables reveals significant complicated, and unexpected kinematic behavior in the experimental machine tool. A particular strength of the proposed methodology is the simultaneous generation of a complete set of compensation tables that accurately captures complicated kinematic errors independent of whether they arise from expected and unexpected sources.

scholarly journals Geometric Error Identification and Analysis of Rotary Axes on Five-Axis Machine Tool Based on Precision Balls

2019 ◽  
Vol 10 (1) ◽  
pp. 100 ◽  
Author(s):  
Chuandong Li ◽  
Xianli Liu ◽  
Rongyi Li ◽  
Shi Wu ◽  
Houwang Song
Keyword(s):  
Machine Tool ◽  
Error Term ◽  
Geometric Error ◽  
Contact Method ◽  
Error Measurement ◽  
Spatial Error ◽  
Term Operation ◽  
Rotary Axes ◽  
Geometric Error Measurement ◽  
Five Axis

This paper presents the design of a precise “ball-column” device to efficiently and accurately measure the geometric error terms of both rotary axes of the five-axis machine tool. A geometric error measurement method of spherical contact was proposed based on the influence of the geometric error term from a five-axis machine tool rotating axis on the integrated geometric error of the machine tool. A multiple degree of freedom, step-by-step contact method based on on-machine measure for measuring the spherical center point is proposed, and the solution formula of each geometric error term of the rotating axis is established, respectively. This method can identify 12 geometric errors based on the influence of one rotating axis on another rotating axis after long term operation. The spatial error field of the five-axis machine tool was constructed by analyzing the error law of the two rotating axes of machine tools based on various positions and postures. Finally, after the comparison of the experiment, the results showed that the accuracy of the developed error measurement device reached 91.8% and the detection time was as short as 30–40 min.

Design and Kinematic Analysis of a Novel Machine Tool With Four Rotational Axes and One Translational Axis

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Song Gao ◽  
Jihong Chen ◽  
Shusheng Liu ◽  
Xiukun Yuan ◽  
Pengcheng Hu ◽  
...  
Keyword(s):  
Machine Tool ◽  
Kinematic Analysis ◽  
Machine Tools ◽  
Inverse Kinematics ◽  
Kinematics Analysis ◽  
Rotary Axes ◽  
Machining Quality ◽  
New Type ◽  
Kinematic Performance ◽  
Five Axis

Abstract Due to their superior machining quality, efficiency, and availability, five-axis machine tools are important for the manufacturing of complicated parts of freeform surfaces. In this study, a new type of the five-axis machine tool was designed that is composed of four rotary axes as well as one translational axis. Given the structure of the proposed machine tool, an inverse kinematics analysis was conducted analytically, and a set of methods was then proposed to address the issues in the kinematic analysis, e.g., the singularity and multi-solution problems. Compared with traditional five-axis machine tools, which are typically composed of three linear axes and two rotary axes, the proposed machine tool exhibited better kinematic performance with machining parts with hub features, such as impellers, which was validated by simulations and real cuttings.

Sign in / Sign up

Export Citation Format

Share Document