scholarly journals Community Dedication on General Facilities Using Solar Cell System in Kalialo Village, Kupang, Jabon, Sidoarjo

2021 ◽  
Vol 4 (2) ◽  
pp. 420
Author(s):  
Boy Isma Putra ◽  
Jamaaluddin Jamaaluddin ◽  
Shazana Dhiya Ayuni
Keyword(s):  
Solar Cell ◽  
Power Plant ◽  
Solar Power ◽  
Cell System ◽  
Solar Power Plant ◽  
Street Lighting ◽  
The Road ◽  
On The Road ◽  
The Village

In essence, road access to Kalialo Village is still very difficult due to the dark terrain and street lighting (PJU), this is because the PJU electricity in the village has been cut off since the last 6 months. Kalialo Village has provided information to PLN regarding the cut off of public street lighting but has not received any response to date.To help and facilitate this access, we as the Center for Engineering and Energy Studies feel the need for a Solar Power Plant (PLTS) or Solar Cel. Which will be installed at certain vital points or locations on the road access to Kalialo Village.

scholarly journals STUDI PEMAKAIAN DAYA SOLAR CELL-HYBRID OFF GRID GEDUNG LABORATORIUM ENERGI SURYA-JURUSAN TEKNIK KONVERSI ENERGI-POLBAN

2020 ◽  
Vol 1 (2) ◽  
pp. 90-96
Author(s):  
Ignatius Riyadi Mardiyanto ◽  
Alvera Apridalianti Melkias
Keyword(s):  
Solar Cell ◽  
Power Plant ◽  
Solar Energy ◽  
Solar Power ◽  
Supply And Demand ◽  
Solar Power Plant ◽  
Alternative Source ◽  
Renewable Source ◽  
Engineering Department ◽  
Electricity Energy Consumption

Solar energy is a renewable source that has never been exhausted, this energy will not reveal pollution into environment such as another power plant. Solar Power Plant is one of renewable source that become on alternative source in the future. One of application of this system is Hybrid Solar Power Plant, this power plant it is use to accomplish electricity energy consumption in Solar Laboratory Energy Conversion Engineering POLBAN with benefitted solar energy as electricity energy soarce. Electricity of energy there is resulted dependent on high and low solar light intensity. This paper is analyzed for both of supply and demand electricity in Laboratory of Solar Energy - Energy Conservation Engineering Department-POLBAN.

Panel Surya Dengan dan Tanpa Sistem Penjejak

2018 ◽  
Vol 1 (1) ◽  
pp. 1-7
Author(s):  
Reni Listiana ◽  
Tri Hardiyanti Yasmin
Keyword(s):  
Solar Cell ◽  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Electrical Energy ◽  
Sensor Data ◽  
Solar Power Plant ◽  
Smart System ◽  
Rotation Direction ◽  
Solar Power Plants

Solar power plants are power plants that convert solar energy (light) into electrical energy. Generation of electricity can be done by using photovoltaic or can also called solar cell, which happened at this time, solar cell can not absorb sunlight optimally, because solar cell only silent in one direction (static) therefore needed smart system for generator Solar power for solar power plants to work more optimally, to make the smart system is needed to read data from several sensors. To find the direction of the arrival of the sunlight rays, used four light dependent resistor sensor (LDR). Light intensity data processing, motor rotation direction determination and other sensor data will be done by microcontroller. Then the data residing on the solar power plant will be displayed on the display and measured how much different in voltage, current and power generated by solar panel. Then the output of the solar power plant be compared among the system with tracking and without tracking. Keywords: PLTS, Light Sensor, voltage, current and power

scholarly journals ANALYSIS THE THERMAL BEHAVIOR OF SOLAR CHIMNEY AT VARYING PARAMETERS

2019 ◽  
Vol 5 (5) ◽  
pp. 14
Author(s):  
Pratima Patel ◽  
Manish Kumar Sharma ◽  
Rajnees Kumar Gedam
Keyword(s):  
Fluid Dynamics ◽  
Solar Cell ◽  
Power Plant ◽  
Thermal Behavior ◽  
Solar Power ◽  
Intake Manifold ◽  
Radius Of Curvature ◽  
Solar Power Plant ◽  
Solar Chimney ◽  
Radial Curvature

In this paper a computerized analysis of the fluid dynamics was conducted for a solar power plant stacked at collector height (H2 = 1.85 m, 3 m, 4 m and 5 m) with different solar irradiations such as 600 W / m2, 800 W / m2 m2, 900 W / m2 and 1000 W / m2. The slope of the roof and the radius of curvature of the manifold vary according to the height of the outlet manifold. The intake manifold height is set to H1 = 1.85 m from a solar cell power plant. The main objective of this work is to study the improvement of efficiency by modifying the design of the solar chimney system by diverging and radial curvature on the roof of the SCPP sensor. From the results, it was observed that the inclination and radius of curvature of the sensor roof had an effect on the efficiency of the sensor and that the efficiency of the sensor was at most 44.92% when the sensor height H2 = 5 m.

PERBANDINGAN KELUARAN PANEL SURYA DENGAN DAN TANPA SISTEM PENJEJAK

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Reni Listiana ◽  
Tri Handayani Yasmin
Keyword(s):  
Solar Cell ◽  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Electrical Energy ◽  
Sensor Data ◽  
Solar Power Plant ◽  
Smart System ◽  
Rotation Direction ◽  
Solar Power Plants

Solar power plants are power plants that convert solar energy (light) into electrical energy. Generation of electricity can be done by using photovoltaic or can also called solar cell, which happened at this time, solar cell can not absorb sunlight optimally, because solar cell only silent in one direction (static) therefore needed smart system for generator Solar power for solar power plants to work more optimally, to make the smart system is needed to read data from several sensors. To find the direction of the arrival of the sunlight rays, used four light dependent resistor sensor (LDR). Light intensity data processing, motor rotation direction determination and other sensor data will be done by microcontroller. Then the data residing on the solar power plant will be displayed on the display and measured how much different in voltage, current and power generated by solar panel. Then the output of the solar power plant be compared among the system with tracking and without tracking.  

scholarly journals Implementasi Teknologi Energi Surya Sebagai Wujud Mandiri Energi Listrik Di Masjid Al-Falah Serua Ciputat Tangerang Selatan

TERANG ◽  
2020 ◽  
Vol 2 (2) ◽  
pp. 151-159
Author(s):  
Christine Widyastuti ◽  
Oktaria Handayani ◽  
Tony Koerniawan
Keyword(s):  
Economic Analysis ◽  
Solar Power ◽  
Electricity Supply ◽  
Street Lighting ◽  
The Road ◽  
Public Facilities ◽  
On The Road ◽  
The Cost ◽  
Incandescent Lamps ◽  
Electricity Tariff

The existence of street lighting and or public facilities is one of the things that is very important for the smooth running of residents' activities, especially at night. However, not all of them had lighting installed as in the Al-Falah Serua Ciputat Mosque in South Tangerang. This village is a village that is electrified but electricity supply for public facilities and roads is still minimal, due also to the large cost of using electricity. Therefore it is necessary to install public and street lighting facilities in this case in the form of solar lights as an effective alternative to solutions in lighting and to reduce the cost of using electricity from PLN. The solar lights are very suitable to be installed in this location, considering that the lights do not require electricity from residents' houses and PLN, and geographically the location is very potential for utilizing solar power because it is still very green. Solar lights are installed at strategic points on the road to Al Falah Mosque and the front porch of Al Falah Mosque itself. The lamp used is a HILIOS SL-40W lamp with 40Watt power. In addition to street lighting and public facilities, an economic analysis is also carried out on this activity by comparing the total costs required between incandescent lighting with solar power. Where the nominal difference obtained in rupiah is Rp 311,055.2 lighter than PJU incandescent lamps, and solar lights are not affected by TDL (basic electricity tariff).

scholarly journals RANCANG BANGUN RUANG PINTAR MINIMALIS TENAGA SURYA DENGAN SISTEM KONTROL BERBASIS ARDUINO

Sutet ◽  
2018 ◽  
Vol 7 (2) ◽  
pp. 111-115
Author(s):  
Redaksi Tim Jurnal
Keyword(s):  
Renewable Energy ◽  
Solar Cell ◽  
Power Plant ◽  
Electronic Devices ◽  
Cell System ◽  
Solar Power Plant ◽  
C Language ◽  
Arduino Microcontroller ◽  
The Many ◽  
Smart Room

This study aims to design a concept of Smart Room System with a source of electricity derived from the Solar Cell System in a home which can facilitate human activities while in the house such as turning on and off the lights, open and close the door of the house. Smart Room System is a technology that allows homeowners to control the entire contents of the house in one hand, can be a smartphone or other gadgets. In improving security and comfort, this system is controlled by Arduino microcontroller. Arduino is connected to a computer via USB, programmed using C language via Arduino IDE by uploading compiled code to Arduino board. Arduino microcontrollers can be utilized as a home light controller, automatic door control and feature controller of other electronic devices. Associated with the many electronic features used in the Smart Room System, the source of electricity used is from a solar power plant that is known that solar or solar is one source of renewable energy is much cheaper, environmentally friendly and more efficient because it minimizes the use of sources electricity PLN 220 V.

Operating Experience of a 20kW Rooftop Solar Power Plant

2018 ◽  
Author(s):  
P. K. Verma ◽  
A. K. Vishnoi ◽  
Naveen Kumar ◽  
Arun K. Nayak ◽  
G. J. Gorade ◽  
...  
Keyword(s):  
Power Plant ◽  
Solar Power ◽  
Operating Experience ◽  
Solar Power Plant ◽  
Rooftop Solar
Sign in / Sign up

Export Citation Format

Share Document