On an enclosed-design of chain drives for sucker-rod pumping units used in low and medium flow-rate wells

Author(s):  
V.M. Valovsky ◽  
◽  
K.V. Valovsky ◽  
I.G. Shamsutdinov ◽  
N.V. Fedoseenko ◽  
...  
2021 ◽  
Vol 2094 (5) ◽  
pp. 052004
Author(s):  
S V Svetlakova ◽  
A N Krasnov ◽  
M Yu Prakhova

Abstract The problem of measuring the flow rate of wells with low production rates is relevant for many oil fields. Conventional flow meters are not suitable for such cases, and installing an additional flow meter for each well is impractical. At the same time, wells with sucker-rod pumping units (the majority of wells) are outfitted with dynamographs for continuous diagnostics of the pumping equipment state. Dynamograms allow determining the theoretical flow rate of the well easily, however, a mathematical model is required to estimate the actual flow rate. For the correction of flow rate obtained from dynamograms, the authors of this study propose using models based on regression equations that link the calculated valueswith the measurements made by a reference instrument. The results of the experiments have confirmed the eligibility of this approach.


Author(s):  
A.A. Ivanchenko ◽  
◽  
G.D. Trifanov ◽  
D.I. Shishlyannikov ◽  
M.M. Tyaktev ◽  
...  
Keyword(s):  

2018 ◽  
Vol 69 (7) ◽  
pp. 1855-1859
Author(s):  
Dorin Badoiu ◽  
Georgeta Toma

It is well known that the bearings of the mechanism of the conventional pumping units are heavily loaded so that their design has to be accomplished very carefully. In this scope the values of the connection forces acting on these bearings has to be determined as accurately as possible. In the paper is presented the kinetostatic analysis of the mechanism of the conventional sucker rod pumping units, obtaining in this way the values of the connection forces in the joints and of the motor moment at the cranks shaft. For processing the experimental records it has been used the program Total Well Management. The simulations have been performed with a computer program developed by the authors using Maple programming environment.


2009 ◽  
Vol 9 (4) ◽  
pp. 469-475
Author(s):  
T. Turtiainen

Radon is one of the contaminants that sometimes impair the water quality of wells, especially those drilled in bedrock. Domestic radon removal units based on aeration have been commercially available for more than ten years. In order to determine how effectively these units remove radon a new test protocol applying frequent sampling while letting 100 litres of water flow, was developed. This way, removal efficiencies can be more accurately calculated and possible malfunctions detected. Seven models of domestic aerators designed for removing radon from household water were tested. The aerators were based on diffused bubble aeration, spray aeration or jet aeration. The average removal efficiencies for 100 litres with a medium flow rate were 86–100% except for a unit that circulated the aerated water back to the well that had removal efficiency of 80% at the maximum. By conducting a questionnaire study usual problems related to the aeration units were localized and recommendations on maintenance and installation are given accordingly.


2019 ◽  
Vol 70 (8) ◽  
pp. 2818-2821
Author(s):  
Georgeta Toma

The study of the dynamic model of the conventional sucker rod pumping units requires first determining the variation on the cinematic cycle of the synthesis parameters (the reduced moment and the reduced mass moment of inertia) and then the variation of the angular speed of the cranks, in response to the dynamic and resistant actions on the component elements that appear during operation. The paper presents the way of determining the variation on the cinematic cycle of the synthesis parameters of the dynamic model corresponding to the conventional pumping unit mechanism and of the variation of the angular speed of its cranks. The experimental records have been processed with the Total Well Management program. The simulations have been performed with a computer program developed by the author using the Maple programming environment.


1986 ◽  
Vol 109 (2) ◽  
pp. 279-285 ◽  
Author(s):  
J. P. Hinson ◽  
G. P. Vinson ◽  
B. J. Whitehouse ◽  
G. M. Price

ABSTRACT Using the in-situ, isolated, perfused rat adrenal system, the actions of adrenal stimulants on steroidogenesis and perfusion medium flow rates (under constant perfusion pump conditions) have been studied. In a series of 100 experiments, initial rates of corticosterone output and flow rates were found to be positively correlated, although there was no such relationship between initial rates of aldosterone output and flow rates. Furthermore, in stable perfusion conditions, bolus injections of ACTH increased both flow rate and steroid output in a dose-related manner. In individual experiments there was a clear correlation between corticosterone and flow, but the association between aldosterone secretion rate and flow was less evident. It is possible that this discrepancy arises because of temporal differences in the responses of these two steroids. Flow was also stimulated by dibutyryl cyclic AMP (dbcAMP), with correlations with steroid output similar to ACTH, but the specific zona glomerulosa stimulants angiotensin II amide and potassium ions had, if anything, inhibitory effects on flow, but only at high concentrations. The data suggest that ACTH and dbcAMP evoke specific responses in the adrenal vasculature, resulting in relatively decreased intraglandular vascular resistance. They furthermore suggest that the secretory functions of the inner adrenocortical zones are subject to the additional control of vascular elements in the intact gland. J. Endocr. (1986) 109, 279–285


2018 ◽  
Vol 246 ◽  
pp. 01062
Author(s):  
Dangwei Wang ◽  
Anjun Deng ◽  
Zuwen Ji ◽  
Hongling Shi

Sediment deposition in the reservoir of run-of-the-river power station is severe, in this paper we take upper Marsyangdi reservoir as an example to analyze sedimentation and desilting process according field data measured from September 2016 when the reservoir had just been impounded in order to find strategy for managing reservoir sedimentation. The ratio of Upper Marsyangdi reservoir capacity and volume of sediment into the reservoir is about 0.2. The reservoir arrived silt-stable in a year after impoundment with a depth of 12m deposition at the dam site. Most of sediment deposit in the periods that at the initial and the end of flood reason and it is found the flow rate is the key factor influencing trap efficiency because that due to damming velocity of medium flow decreased significantly compared to natural condition which caused numerous deposition. Based on result of analysis of deposition the desilting condition is determined. Empty flushing is proposed to release deposition after flood season when flow rate is greater than 100m3/s and the new capacity will last to next flood season. In order to reduce sediment concentration into diversion channel a desilting should be done in flood season when flow rate is larger than 200m3/s and flow rate for impound should not be more than 1/10 of that into reservoir which can avoid deposition during impoundment near dam site.


Sign in / Sign up

Export Citation Format

Share Document