scholarly journals Formulation development and characterization of fast dissolving tablets of oxcarbazepine

2015 ◽  
Vol 3 (01) ◽  
pp. 11-17
Author(s):  
Krishnamurthy A. Kamalapurkar ◽  
Mahesh P. Chitali ◽  
Revansidh R. Pujari
Keyword(s):  
Anticonvulsant Drug ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Stability Studies ◽  
Formulation Development ◽  
Disintegration Time ◽  
Hot Air ◽  
Weight Variation ◽  
The Stability

The objective of this study was formulation development and evaluation of Oxcarbazepine Fast Dissolving Tablets (FDTs) prepared by sublimation technique where different sublimating agents like camphor and menthol were used with L-HPC and crospovidone as a superdisintegrants. Oxcarbazepine is an anticonvulsant drug used in the treatment of epilepsy and bipolar disorder. Each sublimating agent was used in concentration of 10-20 mg per tablet. Tablets were first prepared and then kept in hot air oven for sublimation. The prepared FDTs were evaluated for weight variation, thickness, drug content, friability, hardness, wetting time, water absorption ratio, in-vitro dispersion time, in-vitro disintegration time and in-vitro dissolution time. All formulations showed disintegration time ranging from 8 to 332sec. Optimized batch (SA6) was selected for the stability studies. The results of stability studies revealed that there was no remarkable difference in the tested parameters of promising formulation after storage for 3 months at 400 c ± 20 c 75% ± 5%RH and at room temperature 65% ± 5%RH as compared to initial results All the prepared formulae complied with Pharmacopoeia requirements of drug contents.

scholarly journals Formulation, Development and Evaluation of Fast Dissolving Tablet of Meclofenamate Sodium by Using Natural Superdisintegrant (Banana Powder)

2021 ◽  
Vol 69 (2) ◽  
Author(s):  
Dr. Dilip Agrawal ◽  
Dr. Rakesh Goyal ◽  
Dr. Mukesh Bansal ◽  
Ashok Kumar Sharma ◽  
Mohit Khandelwal
Keyword(s):  
Drug Release ◽  
Joint Stiffness ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Formulation Development ◽  
Disintegration Time ◽  
Weight Variation ◽  
The Stability

The demands for fast dissolving tablets have received ever increasing day by day during the last decade. In the present projected study, the effect of natural Super disintegrants was compared with synthetic Super disintegrants and conventional Super disintegrants in the of fast dissolving tablet formulation of Meclofenamate Sodium. Meclofenamate sodium NSAID is used for the treatment of mild to moderate pain in various conditions like (e.g., dental pain, osteoarthritis) and to decrease pain and blood loss during menstrual periods. It is also used for other treatments like reducing pain, swelling, and joint stiffness caused with rheumatoid arthritis. In the present work 9 formulations of FDT (Fast dissolving tablet) of Meclofenamate Sodium were prepared by using Super disintegrants was evaluated and compiles with the official parameters and specifications. Various formulations were prepared using four different super disintegrants namely natural super disintegrant Banana Powder, sodium starch glycolate, crosscarmelose sodium with three concentrations (2%, 4%, 6%) by direct compression method. The blend was evaluated for pre-compression parameters like Angle of repose, bulk density, tapped density, and then tablet evaluated with various post-compression parameters like thickness, drug content, hardness, weight variation, wetting time, friability, disintegration time, dissolution time, drug release study. Formulation F2 showed the lowest disintegration time and in-vitro dissolution studies recorded that formulation F2 showed 98.55% drug release at the end of 3 minutes. The best formulations among these were also found to be stable and optimized formulations were subjected to the stability studies as per ICH guideline.

scholarly journals DEVELOPMENT, FORMULATION AND EVALUATION OF MECLOFENAMATE FAST DISSOLVING TABLETS

2021 ◽  
Vol 10 (1) ◽  
pp. 59-67
Author(s):  
Mahipal Shakkarwal ◽  
Dr. Mukesh Sharma ◽  
Dr. Ram Garg ◽  
Shankar Lal Soni ◽  
Gopal Kumar Paswan ◽  
...  
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation ◽  
Suitable Treatment ◽  
The Stability

The demands for fast dissolving tablets have received ever increasing day by day during the last 10-15 years for the onset of action. In the present study, the effect of superdisintegrant was compared with synthetic super disintegrants and other conventional super disintegrants in the of fast dissolving tablet formulation of Meclofenamate. Meclofenamate is an antihypertensive drug and in case of hypertension immediate treatment is required so the proposed investigation is totally based to provide the suitable treatment for hypertension. In the present work 9 formulations of Fast dissolving tablets of Cilnidipine were prepared by using Synthesized Co-proceed was evaluated and compiles with the official standards, parameters and specifications. Various formulations were prepared using four different superdisintegrant namely- kyron T-304, sodium starch glycolate, cross carmelose sodium with three concentrations (2%, 4%, 6%) by direct compression method. The blend was evaluated for pre-compression parameters like Angle of repose , bulk density , tapped density , and then tablet  evaluated post-compression parameters like thickness , drug content , hardness , weight variation  , wetting time , friability , disintegration time , dissolution time, drug release study. Formulation A8 showed the lowest disintegration time and in-vitro dissolution studies recorded that formulation A8 showed 98.64% drug release at the end of 3 minutes. The best formulations were also found to be stable and optimized formulations were subjected to the stability studies as per ICH guideline and standards.

Formulation and Evaluation of Orodispersible Tablets Containing Taste Masked Mirabegron Resinate

2021 ◽  
pp. 4736-4742
Author(s):  
Sarika S. Malode ◽  
Milind P. Wagh
Keyword(s):  
Overactive Bladder ◽  
Bitter Taste ◽  
In Vitro Release ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Disintegration Time ◽  
Orodispersible Tablets ◽  
Weight Variation

The objective of present work was to develop taste masked orodispersible tablets of mirabegron. Mirabegron is beta 3 adrenoceptor agonist used to treat overactive bladder. Overactive bladder (OAB) is defined as a symptom syndrome showing feeling of urgency to urinate, typically accompanied by frequent daytime and nocturnal urination, in the absence of proven infection or other obvious pathology. Over active bladders are generally common in geriatrics. Moreover, this drug has a very strong bitter taste. Frequent dosing requires frequent water intake, which further aggregates the condition of over active bladder and bitter taste of drug affects patient compliance. Hence a need arises to mask the bitter taste for development of an ODT which does not require consuming water with every dosage. In this work, the bitter taste of mirabegron was masked by forming a complex with an ion exchange resin tulsion 344. The drug resin complexation process was optimized for resin activation, drug: resin ratio, soaking time and stirring time. In –vitro release studies revealed complete drug elution from the complex within 10 minutes in pH 1.2 buffer. The taste-masked complex was then formulated into palatable orodispersible tablets using a direct compression approach by use of superdisintegrants to achieve a rapid disintegration. The tablets were evaluated for weight variation, hardness, friability, drug content, wetting time, In- vivo disintegration time and in-vitro dissolution time.

scholarly journals Formulation design, optimization & in vitro evaluation of novel orodissolving tablets of efavirenz for hiv infections

2015 ◽  
Vol 49 (3) ◽  
pp. 173-180
Author(s):  
T Ayyappan ◽  
C Poojitha ◽  
T Vetrichelvan
Keyword(s):  
Drug Release ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Wetting Time

In the present work, orodissolving tablets of Efavirenz were prepared by direct compression method with a view to enhance patient compliance. A 23 full factorial design was applied to investigate the combined effect of three formulation variables. Amount of crospovidone, croscarmellose sodium and sodium starch glycolate were used as superdisintegrant material along with direct compressible mannitol to enhance mouth feel. The prepared batches of tablets were evaluated for hardness, friability, weight variation, disintegration time, wetting time, drug content and in-vitro dissolution studies. Based on wetting time, disintegration time, the formulation containing crospovidone (5% w/v), carscarmellose sodium (5% w/v) and sodium starch glycolate (8% w/v) was found to be promising and tested for in-vitro drug release pattern (in 0.1 N HCl), short term stability and drug- superdisintegrants interaction. Surface response plots are presented to graphically represent the effect of independent variables (conc. of superdisintegrants) on the in-vitro dissolution time. The validity of the generated mathematical model was tested by preparing extra-design check point formulation. The formulation showed nearly faster drug release compared to the conventional commercial tablet formulation. Stability studies on the optimized formulation indicated that there was no significant change found in physical appearance, hardness, disintegration time, drug content and in-vitro drug release. DOI: http://dx.doi.org/10.3329/bjsir.v49i3.22131 Bangladesh J. Sci. Ind. Res. 49(3), 173-180, 2014

scholarly journals Comparative Evaluation of Some Commercial Clopidogrel Tablets Available in Yemen

2018 ◽  
Vol 13 (2) ◽  
pp. 79
Author(s):  
Bassam Abduh Ali ◽  
Mohammed Gameel Al-haddad ◽  
Abdullah Ahmed Areqi
Keyword(s):  
Quality Parameters ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
Weight Variation ◽  
Quality Control Parameters ◽  
Variation Range

Clopidogrel is a medication to reduce the risk of heart disease and taken orally. Quality of drug characterizes the production process and every phamaceutical company strives for it but often it is very difficult to achieve. This study was to investigate quality control parameters of some marketed Clopidogrel tablets. To assess the quality, eight different marketed brands of Clopidogrel 75 mg tablets available in Yemeni market collected from different pharmacies in Hodeida city. Different quality parameters like weight variation, hardness, thickness and friability were determined according to established protocols. Then the in-vitro dissolution test, potency, disintegration time were also carried out. UV-spectrophotometer was used to determine the percentage released and assay at 218 nm. All the brands comply the requirements of Pharmacopoeia as they showed acceptable weight variation range. Friability of all brands was less than 1% and no significant differences in disintegration times as they disintegrated within 15 minutes. In case of dissolution profile, all brands except C6 showed acceptable dissolution time as they released more than 60% of drug in 45 minute. The hardness of only two brands was within the range. All brands also meet the potency specifications. This study suggested that most commercially Clopidogrel tablets in Yemen maintain the quality and comply with the pharmacopeia specifications.

Formulation and Evaluation of Orally Disintegrating Tablets of Lamotrigine

2015 ◽  
Vol 8 (2) ◽  
pp. 2881-2888
Author(s):  
Sudarshan Singh ◽  
S S Shyale ◽  
P Karade
Keyword(s):  
Drug Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium

The aim of this study was to design orally disintegrating tablet (ODT) of Lamotrigine. It is an Antiepileptic drug which is widely used in epilepsy. It is also used in simple and complex partial seizures and secondary generalized tonic-clonic seizures. It is poorly water soluble drug (0.46 mg/ml). Thus, an attempt was made to enhance the water solubility by complexation with β-cyclodextrin (1:1 molar ratios). The orally disintegrating tablet of lamotrigine was prepared by direct compression method using different concentration of superdisintegrants such as Sodium starch glycollate, croscarmellose sodium by sublimating agent such as camphor. The formulations were evaluated for weight variation, hardness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies. The prepared tablets were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The disintegration time for the complexed tablets prepared by different concentration of superdisintegrants was found to be in range of 32.54 ± 0.50 to 55.12 ± 0.57 sec and wetting time of the formulations was found to be in range of 28.47 ± 0.67 to 52.19 ± 0.72 sec. All the formulation showed almost 100 percent of drug release within 15 min. Among all the formulation F6 and F7 prepared with 18% croscarmellose sodium and camphor shows faster drug release, respectively 10 min, F6 gives good result for disintegration time, drug release, wetting time and friability. Further formulations were subjected to stability testing for 30 days at temperature of 40 ± 5 ºC/75 ± 5 %RH. Tablets showed no appreciable changes with respect to physical appearance, drug content, disintegration time and dissolution profiles. Results were statistically analyzed by one-way ANOVA at a p < 0.05. It was found that, the data at any point of time are significant at p < 0.05.

scholarly journals Formulation and evaluation of taste masked oral disintegrating tablets of lornoxicam

2021 ◽  
Vol 11 (5) ◽  
pp. 115-120
Author(s):  
Kritika Rai ◽  
Vivek Jain ◽  
Sunil Kumar Jain ◽  
Pushpendra Kumar Khangar
Keyword(s):  
Cation Exchange Resin ◽  
The Elderly ◽  
In Vitro Dissolution ◽  
Taste Masking ◽  
Direct Compression ◽  
Compression Technique ◽  
Disintegration Time ◽  
Weight Variation ◽  
Croscarmellose Sodium

Orally disintegrating tablets (ODT) disintegrate quickly with saliva when administered into the oral cavity and taken without water or chewed. ODT are easy to take for children and the elderly, who may experience difficultly in taking ordinary oral preparations such as tablets, capsules, and powders.  The ODT threes substantial benefits for the patient (or elder) who cannot swallow (Dysphagia), or who is not permitted water intake due to disease. The reason of the current research was to prepare taste masking oral disintegrating tablets of poorly soluble lornoxicam (LXM) by direct compression technique using Kyron T-114 (cation exchange resin) as a taste masking agent. With in various ratios the Drug-resin of 1:4 was established to present best taste masking. The superdisintegrants used in formulation are croscarmellose sodium and cross povidone. Among these croscarmellose sodium demonstrated superior drug release. The tablets were evaluated for friability, weight variation, wetting time, hardness, disintegration time and uniformity of content. Optimized formulations were evaluated for in vitro dissolution test. Amongst all the formulations F-6 was found to be most successful tablets prepared by this technique had disintegration time of 30sec and % CDR 94.78 within 30min. Hence, this advance can be utilized for taste masking of bitter pharmaceutical ingredients leading to superior patient compliance. Keywords: Oral disintegration tablets, Lornoxicam, Kyron T-114, Superdisintegrants, Direct Compression.

scholarly journals FABRICATION AND CHARACTERIZATION OF FAST DISSOLVING FILMS OF ECLIPTA PROSTRATE LEAVES EXTRACT TO TREAT MOUTH ULCERS

2021 ◽  
pp. 263-271
Author(s):  
MANIKIRAN S. S. ◽  
NAGAM SANTHI PRIYA ◽  
B. AUBINE MOLLY ◽  
LAKSHMI PRASANTHI NORI
Keyword(s):  
Drug Release ◽  
Moisture Loss ◽  
Disintegration Time ◽  
Weight Variation ◽  
Eclipta Prostrata ◽  
Release Studies ◽  
Study Results ◽  
The Stability ◽  
Oral Films

Objective: This research focused on the design of fast dissolving herbal film of Eclipta Prostrate leaves extract for mouth ulcers. Methods: The extract of Eclipta Prostrata leaves was formulated as films by solvent casting method using various polymers viz., HPMC E5, HPMC E15, sodium alginate and PVA. The films were designed by using propylene glycol as a plasticizer, SSG as super disintegrate and honey as a sweetener. Furthermore, the films were evaluated for thickness, folding endurance, weight variation, % elongation, surface pH, % moisture uptake, % moisture loss, disintegration and in vitro drug release study. Results: The revealed that all the films were good in appearance and had a smooth texture. Out of all ten formulations, F3 and F5 disintegrated rapidly with a disintegration time of 27 and 32 seconds. The drug release studies revealed that all the formulations had a good release profile, but the F3 formulation showed rapid release i.e. 83.57% in 4 min. The stability studies revealed that the formulations F3 and F5 were found good with non-tackiness, easily separable and disintegrated at 29 and 33 sec respectively with no appearance and drug release. Conclusion: The research revealed that Eclipta prostrate leaves extract can be formulated into oral films for the treatment of mouth ulcers with improved bioavailability and expected patient compliance.

Fabrication and Evaluation of Mouth Dissolving Strips of Metoclopramide Hydrochloride by Using Novel Film Former

2021 ◽  
pp. 5515-5520
Author(s):  
Hemant A. Deokule ◽  
Smita S. Pimple ◽  
Praveen D. Chaudhari ◽  
Ajit S. Kulkarni
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Systemic Circulation ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Visual Appearance ◽  
Dsc Studies ◽  
Weight Variation ◽  
Metoclopramide Hydrochloride

Fast dissolving strips are used as novel approaches, as it dissolves rapidly in mouth and directly reaches the systemic circulation. In present research work, an attempt has been made to prepare mouth dissolving strips of Metoclopramide hydrochloride by using a novel film former Pullulan by solvent casting method. A33 full factorial design was utilized for the optimization of the effect of independent variables such as the amount of Pullulan, amount of PEF 400, amount of SSG on mechanical properties, and % drug release of strips. The drug compatibility studies using FTIR and DSC studies formulated strips were characterized for their physicochemical parameter like weight variation, visual appearance, folding endurance, thickness, disintegration time, drug content, and in vitro dissolution studies. FTIR and DSC studies revealed that the polymer is compatible with the drug. It was found that the optimum levels of the responses for a fast release strip could be obtained at low levels of Pullulan, PEG400, and SSG. The prepared strip was clear transparent and had a smooth surface. The surface pH was found 4.8 to 5.2 be in the range of to which is close to salivary pH, which indicates that strips may have less potential to irritate the oral mucosa, thereby they are comfortable. The drug release was found to be between 90.94 to 100.5% in 2 min. The in-vitro disintegration time of strips prepared with Pullulan was in the range of 19 to 57 sec. As the concentration of SSG increases the decrease in the disintegration time of strips a decrease. The dissolution rate increased with an increase in the concentration of SSG. Hence, it can be inferred that the fast dissolving oral strips of Metoclopramide hydrochloride may produce rapid action thereby improving bioavailability and enhance the absorption by avoiding the first-pass effect.

TASTE MASKING OF OXYBUTYNIN CHLORIDE USING LIPID EXCIPIENTS AND FORMULATION AS ORODISPERSIBLE TABLETS FOR GERIATRIC POPULATION

INDIAN DRUGS ◽  
2013 ◽  
Vol 50 (10) ◽  
pp. 39-46
Author(s):  
V Prakash ◽  
◽  
L. Keshri ◽  
V. Sharma ◽  
K. Pathak
Keyword(s):  
In Vitro Release ◽  
In Vitro Dissolution ◽  
Taste Masking ◽  
Dissolution Time ◽  
Disintegration Time ◽  
Geriatric Population ◽  
Orodispersible Tablets ◽  
Lipid Excipients

The aim of the present study was to mask the bitter taste of oxybutynin chloride by lipid excipients and to develop its fast disintegrating tablet. For this purpose, a blend of two lipids, glyceryl behenate and glyceryl palmitostearate was utilized for taste masking by solvent evaporation method. The evaporation of solvent was accomplished by freeze drying and taste masked granules were characterized for their micromeritic and rheological properties. The state of dispersion was analyzed by SEM and DSC. Orodispersible tablets were then formulated (F1- F6) using Polyplasdone XL as extragranular superdisintegrant and evaluated for hardness, disintegration time, in vitro dissolution time and in vivo disintegration time. Results indicated that the formulation F6 exhibited minimum in vivo disintegration time of 8 sec with effective taste masking. In vitro release analysis indicated %DE10 and %DE25 of 51.48 and 76.53 respectively. Conclusively, taste masked orodispersible formulation of oxybutynin chloride was developed that could be beneficial for geriatric population.

Sign in / Sign up

Export Citation Format

Share Document