Features of radiothermoluminescence of polypropylene and ethylene propylenediene elastomer SKEPT-4044 compositions with nanoscale metal-containing fillers

2020 ◽  
pp. 66-73
Author(s):  
A.M. Magerramov ◽  
◽  
N.I. Kurbanova ◽  
M.N. Bayramov ◽  
N.A. Alimirzoyeva ◽  
...  
Keyword(s):  
Transition Temperature ◽  
Molecular Mobility ◽  
Fe3o4 Nanoparticles ◽  
Low Temperatures ◽  
Frost Resistance ◽  
Relaxation Processes ◽  
Ethylene Propylene ◽  
Temperature Range ◽  
Β Relaxation

Using radiothermoluminescence (RTL), the molecular mobility features in the temperature range of 77-300 K were studied for the polypropylene (PP)/ethylene propylene diene elastomer SKEPT-4044 with NiO, Cu2O and Fe3O4 nanoparticles (NPs) based on ABS-acrylonitrile butadiene or SCS-divinyl styrene matrices. It has been shown that the introduction of nanofillers in PP significantly affects the nature and temperature of γ- and β-relaxation processes, while the region of manifestation of the β-process noticeably shifts to the region of low temperatures. Composites with Cu2O NPs have a higher β-transition temperature Tβ than composites with other NPs. It was found that PP/SKEPT-4044 composites with Cu2O NPs with a dispersion of 11-15 nm and acrylonitrile butadiene thermoplastics have optimal frost resistance compared to other compositions.

scholarly journals Pharmaceutical Amorphous Organic Materials Characterization by Using the Differential Scanning Calorimetry and Dynamic Mechanical Analysis

2011 ◽  
Vol 6 (2) ◽  
pp. 91-95
Author(s):  
Ion Dranca ◽  
Igor Povar ◽  
Tudor Lupascu
Keyword(s):  
Differential Scanning Calorimetry ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Dynamic Mechanical Analysis ◽  
Mechanical Analysis ◽  
Relaxation Processes ◽  
Scanning Calorimetry ◽  
Dynamic Mechanical ◽  
Β Relaxation

This research has been carried out in order to demonstrate the use of differential scanning calorimetry (DSC) in detecting and measuring α- and β-relaxation processes in amorphous pharmaceutical systems. DSC has been employed to study amorphous samples of poly (vinylpyrrolidone) (PVP), indomethacin (InM), and ursodeoxycholic acid (UDA) that are annealed at temperature (Ta) around 0.8 of their glass transition temperature (Tg). Dynamic mechanical analysis (DMA) is used to measure β- relaxation in PVP. Yet, the DSC has been used to study the glassy indomethacin aged at 0 and -10 oC for periods of time up to 109 and 210 days respectively. The results demonstrate the emergence of a small melting peak of the α-polymorph after aging for 69 days at 0°C and for 147 days at -10°C (i.e., ~55°C below the glass transition temperature) that provides evidence of nucleation occurring in the temperature region of the β-relaxation.

scholarly journals Specific Features of Photoconductivity of Tl1-xIn1-xSnxSe2 Monocrystals at Low Temperatures

2019 ◽  
Vol 20 (1) ◽  
pp. 50-55
Author(s):  
O.V. Novosad ◽  
G.L. Myronchuk ◽  
S.P. Danylchuk ◽  
O.V. Zamurueva ◽  
L.V. Piskach ◽  
...  
Keyword(s):  
Single Crystals ◽  
Thermal Energy ◽  
Low Temperatures ◽  
Relaxation Processes ◽  
Directional Crystallization ◽  
Thermally Stimulated Currents ◽  
Temperature Range ◽  
Thermostimulated Currents

The photoconductivity spectra in the temperature range T≈36-200 K and the spectra of thermostimulated currents in the temperature range T≈70-300 K of Tl1-xIn1-xSnxSe2 single crystals obtained by directional crystallization of Bridgman-Stockbarger have been studied. The induced photoconductivity and long-term photoconductivity relaxation processes have been found. To interpret the found results, a model of two-center recombination has been suggested. It is illustrated that the role of the r-centers of slow recombination are formed by Tl vacancies. On the basis of the studies of the spectra of thermally stimulated currents, the thermal energy of electrons activation with t-levels of adhesion has been determined.

The remanent magnetization of haematite single crystals

1968 ◽  
Vol 303 (1475) ◽  
pp. 511-524 ◽  
Keyword(s):  
Transition Temperature ◽  
Single Crystals ◽  
Low Temperatures ◽  
Remanent Magnetization ◽  
Sharp Reduction ◽  
Narrow Temperature Range ◽  
Temperature Range ◽  
Fast Neutron Irradiation ◽  
Theoretical Predictions ◽  
Synthetic Crystals

The variation of the remanent magnetization with temperature of several synthetic and natural single crystals of haematite has been measured in the temperature range 60 to –90 °C. Particular attention was given to the measurement of the remanence at temperatures close to the transition temperature. The remanent magnetization of the synthetic crystals showed a sharp reduction over a narrow temperature range; the natural crystals showed a much smaller reduction over a wider temperature range. All the specimens were found to be magnetic at low temperatures which is not in accord with theoretical predictions. The effect of annealing at high temperatures on the behaviour of the remanent magnetization was investigated. The results of measurements of the remanent magnetization of specimens which had been subjected to fast neutron irradiation are also reported.

In situ Tensile Experiments at Low Temperatures on Niobium Single Crystals by H.V.E.M.

1975 ◽  
Vol 33 ◽  
pp. 58-59
Author(s):  
F. H. Louchet ◽  
L. P. Kubin
Keyword(s):  
Electron Microscope ◽  
Transition Temperature ◽  
Low Temperature ◽  
Slip System ◽  
Low Temperatures ◽  
Tensile Axis ◽  
Image Intensifier ◽  
Screw Dislocations ◽  
Source Operation

Experiments have been carried out on the 3 MeV electron microscope in Toulouse. The low temperature straining holder has been previously described Images given by an image intensifier are recorded on magnetic tape.The microtensile niobium samples are cut in a plane with the two operative slip directions [111] and lying in the foil plane. The tensile axis is near [011].Our results concern:- The transition temperature of niobium near 220 K: at this temperature and below an increasing difference appears between the mobilities of the screw and edge portions of dislocations loops. Source operation and interactions between screw dislocations of different slip system have been recorded.

Dynamic Viscosity of Compressed Water to 10 Kilobar and Steam to 1500°C

1969 ◽  
Vol 11 (2) ◽  
pp. 189-205 ◽  
Author(s):  
E. A. Bruges ◽  
M. R. Gibson
Keyword(s):  
Gaseous Phase ◽  
Dynamic Viscosity ◽  
Low Temperatures ◽  
Pressure Range ◽  
Low Pressure ◽  
Temperature Range ◽  
Inversion Temperature ◽  
Pressure Steam ◽  
Correlating Equations ◽  
First Time

Equations specifying the dynamic viscosity of compressed water and steam are presented. In the temperature range 0-100cC the location of the inversion locus (mu) is defined for the first time with some precision. The low pressure steam results are re-correlated and a higher inversion temperature is indicated than that previously accepted. From 100 to 600°C values of viscosity are derived up to 3·5 kilobar and between 600 and 1500°C up to 1 kilobar. All the original observations in the gaseous phase have been corrected to a consistent set of densities and deviation plots for all the new correlations are given. Although the equations give values within the tolerances of the International Skeleton Table it is clear that the range and tolerances of the latter could with some advantage be revised to give twice the existing temperature range and over 10 times the existing pressure range at low temperatures. A list of the observations used and their deviations from the correlating equations is available as a separate publication.

Electron Irradiation of YBa2Cu3O7 at low Temperatures

1987 ◽  
Vol 99 ◽  
Author(s):  
B. Stritzker ◽  
W. Zander ◽  
F. Dworschak ◽  
U. Poppe ◽  
K. Fischer
Keyword(s):  
Transition Temperature ◽  
Electron Irradiation ◽  
Normal State ◽  
Low Temperatures ◽  
Superconducting Transition Temperature ◽  
Superconducting Transition ◽  
Radiation Induced ◽  
State Resistance ◽  
Normal State Resistance

ABSTRACTBulk samples of YBa2Cu3O7−x have been homogenously irradiated with 3 MeV electrons at temperatures below 20 K. Whereas the superconducting transition temperature, Tc, drops dramatically with increasing dose the width of the transition remains unchanged (Δ Tc ≤ 1.5 K). The normal state resistance at 100 K increases substantially during the electron irradiation. Several irreproducible experiments can be interpreted with a radiation induced, unstable increase of Tc.

Optimization of Sample Holder Materials for Sensitive Magnetometry Measurements at Low Temperatures

2004 ◽  
Vol 825 ◽  
Author(s):  
I. Bossi ◽  
N.R. Dilley ◽  
J. R. O'Brien ◽  
S. Spagna
Keyword(s):  
Magnetic Field ◽  
Low Temperatures ◽  
Magnetic Response ◽  
Sample Holder ◽  
Magnetization Measurements ◽  
Temperature Range ◽  
Paramagnetic Impurities ◽  
Fused Quartz

AbstractMagnetization measurements were performed as a function of magnetic field H and temperature T on samples of nine different materials including clear fused quartz, cartridge brass, G-10 glass-reinforced epoxy, acetal homopolymer, glass-filled acetal, phenolic, and other plastics. A small yet distinct amount of ferromagnetic or paramagnetic impurities is observed in all the materials investigated in this study except quartz. In contrast, the magnetic response of quartz is typical of a diamagnet over the temperature range 5 K to 300 K. The volume susceptibility is equal to −4.4×10−7 (cgs) over the whole temperature range.

Sign in / Sign up

Export Citation Format

Share Document