Improved Event-Based Pi Controller for Limit Cycles Avoidance

Author(s):  
Noraide Md Yusop ◽  
◽  
Rosbi Mamat ◽  

One of the issues in designing event-based proportional-integral (PI) controller using aggressive tuning rules is the possible occurrence of limit cycles. To date, there is no adequate simple event-based PI controller technique able to explicitly use aggressive tuning rule. In this paper an improved simple event-based PI controller is proposed to address this issue. By analysing the discrete PI algorithm, an improved triggering condition is introduced. To test the effectiveness of the approach, extensive simulations are carried out by introducing the proposed method to process control under various sampling period, triggering limit, and different tuning rules namely, AMIGO, SIMC and One-Third tuning rules. The performances are evaluated based on two standard criteria: ability to imitate the time-triggered system and computation load reduction. The results show that the performance of the proposed method able to surpass others simple event-based PI controller approaches by giving a closest response to the time-triggered system, lowest computational load and able to avoid the limit cycles occurrences. It is envisaged that the proposed method can be useful in designing a simple event-based PI controller that compatible with any type of tuning rules.

Processes ◽  
2019 ◽  
Vol 7 (5) ◽  
pp. 247 ◽  
Author(s):  
Enrique Rodríguez-Miranda ◽  
Manuel Beschi ◽  
José Luis Guzmán ◽  
Manuel Berenguel ◽  
Antonio Visioli

In this paper, a new solution to improve the traditional control operation of raceway microalgae reactors is presented. The control strategy is based on an event-based method that can be easily coupled to a classical time-driven proportional-integral controller, simplifying the design process approach. The results of a standard Proportional-Integral (PI) controller, as well as of two event-based architectures, are presented in simulation and compared with each other and with traditional On/Off control. It is demonstrated that the event-based PI controller—operating during the whole day instead of only during daytime—achieves a better performance by reducing the actuator effort and saving costs related to gas consumption.


2014 ◽  
Vol 47 (3) ◽  
pp. 5766-5771 ◽  
Author(s):  
Manuel Beschi ◽  
Sebastian Dormido ◽  
José Sanchez ◽  
Antonio Visioli
Keyword(s):  

Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5874 ◽  
Author(s):  
Marcelo Miranda Camboim ◽  
Juan Moises Maurício Villanueva ◽  
Cleonilson Protasio de Souza

In the last decades, a lot of effort has been made in order to improve the use of environmentally friendly and renewable energy sources. In a context of small energy usage, energy harvesting takes place and thermal energy sources are one of its main energy sources because there are several unused heat sources available in the environment that may be used as renewable energy sources. To rapidly evaluate the energy potential of such thermal sources is a hard task, therefore, a way to perform this is welcome. In this work, a thermal pattern emulation system to evaluate potential thermal source in a easy way is proposed. The main characteristics of the proposed system is that it is online and remote, that is, while the thermal-source-under-test is being measured, the system is emulating it and evaluating the generated energy remotely. The main contribution of this work was to replace the conventional Proportional Integral Derivative (PID) controller to a Fuzzy-Proportional Integral (PI) controller. In order to compare both controllers, three tests were carried out, namely: (a) step response, (b) perturbation test, (c) thermal emulation of the thermal pattern obtained from a potential thermal source: tree trucks. Experimental results show that the Fuzzy-PI controller was faster than the PID, achieving a setting time 41.26% faster, and also was more efficient with a maximum error 53% smaller than the PID.


2014 ◽  
Vol 47 (3) ◽  
pp. 9051-9056 ◽  
Author(s):  
J. Chacón ◽  
M. Beschi ◽  
J. Sánchez ◽  
A. Visioli ◽  
S. Dormido
Keyword(s):  

2012 ◽  
Vol 45 (3) ◽  
pp. 164-169 ◽  
Author(s):  
Sebastián Dormido ◽  
Manuel Beschi ◽  
José Sánchez ◽  
Antonio Visioli

Author(s):  
Vijayalaxmi Munisamy ◽  
Nayagam Shanmuga Vadivoo ◽  
Vaithilingam Devasena

The major purpose of this work is to design the controllers for controlling the variable speed, variable pitch wind turbine (WT) with doubly fed induction generator (DFIG). Vector control strategy is adopted for controlling the DFIG active and reactive power. Generator torque is control to provide the regulated real power with minimum fluctuation. The fixed gain proportional-integral (PI) controller designed to the converter of rotor side and grid side has limited operating range and inherent overshoot. Gain scheduling PI controller is designed to minimize the overshoot and fluctuation exists in proportional-integral controller. Since DFIG based wind energy conversion system (WECS) works in uncertain wind speed, stochastic distribution control (SDC) method is proposed to control the probability distribution function (PDF) of DFIG based WECS. It copes with nonlinearities in the WECS and contiguous variations at operating point and provides satisfactory performance for the whole operating region. It improves the performance together with power quality of generated electric power thereby maximizing the lifespan of installation and ensures secure and acceptable operation of the DFIG based WECS.


Sign in / Sign up

Export Citation Format

Share Document