scholarly journals ABRASIVE DISC IMPREGNATION

2019 ◽  
Vol 2019 (12) ◽  
pp. 13-20
Author(s):  
Liana Gusakova
Keyword(s):  
Friction And Wear ◽  
Chemical Processes ◽  
Mass Composition ◽  
Colloid Chemistry ◽  
Equilibrium Thermodynamics ◽  
New Methods ◽  
Mechanics Of Materials ◽  
Physical Chemical ◽  
Film Forming ◽  
Disc Grinding

In order to solve the problems of the effectiveness increase in parts machining with grinding there are developed impregnated abrasive discs. The impregnated grinding disc application allows increasing effectiveness, intensifying a process, increasing surface smoothness with minimum defects as compared with non-impregnated disc grinding. The investigations of grinding processes were based on the regulations of the theory of friction and wear, theory of cutting, physical-chemical mechanics of materials, physical and colloid chemistry, non-equilibrium thermodynamics. Physical-chemical processes accompanying grinding with impregnated grinding discs are investigated. It is defined that a cutting ability of a grinding disc and its durability increase, glazing decrease and quality improvement of a part worked take place. New methods for obtaining a composition for impregnation are tested. It is substantiated theoretically and confirmed experimentally grinding effectiveness increase at the introduction into an abrasive mass composition a film-forming matter – chromium diiodide.

A Freeze Shadow Technique for the Preparation of Soft Paint Latexes for Electron Microscopy

1977 ◽  
Vol 35 ◽  
pp. 314-315
Author(s):  
Earl R. Walter ◽  
Glen H. Bryant
Keyword(s):  
Sample Preparation ◽  
High Vacuum ◽  
Vacuum System ◽  
Latex Particles ◽  
New Methods ◽  
Diffusion Pump ◽  
Film Forming ◽  
Routine Basis ◽  
Distribution Studies ◽  
Preparation Techniques

With the development of soft, film forming latexes for use in paints and other coatings applications, it became desirable to develop new methods of sample preparation for latex particle size distribution studies with the electron microscope. Conventional latex sample preparation techniques were inadequate due to the pronounced tendency of these new soft latex particles to distort, flatten and fuse on the substrate when they dried. In order to avoid these complications and obtain electron micrographs of undistorted latex particles of soft resins, a freeze-dry, cold shadowing technique was developed. The method has now been used in our laboratory on a routine basis for several years.The cold shadowing is done in a specially constructed vacuum system, having a conventional mechanical fore pump and oil diffusion pump supplying vacuum. The system incorporates bellows type high vacuum valves to permit a prepump cycle and opening of the shadowing chamber without shutting down the oil diffusion pump. A baffeled sorption trap isolates the shadowing chamber from the pumps.

scholarly journals Hybrid Manufacturing based on the combination of Mechanical and Electro Physical–Chemical Processes

Procedia CIRP ◽  
2020 ◽  
Vol 95 ◽  
pp. 649-661
Author(s):  
Bert Lauwers ◽  
Nataliia Chernovol ◽  
Benjamin Peeters ◽  
Dries Van Camp ◽  
Thomas Van Riel ◽  
...  
Keyword(s):  
Chemical Processes ◽  
Hybrid Manufacturing ◽  
Physical Chemical

scholarly journals INVESTIGATION OF SOLID PARTICLES UNDER THE ACTION OF AN ACOUSTIC FIELD / SKYSTYJE ESANČIŲ KIETŲJŲ DALELIŲ SĄVEIKOS AKUSTINIAME LAUKE TYRIMAS

2013 ◽  
Vol 5 (6) ◽  
pp. 655-658
Author(s):  
Egidijus Mykolaitis ◽  
Andrius Styra ◽  
Vladas Vekteris
Keyword(s):  
Water Treatment ◽  
Ground Water ◽  
Acoustic Field ◽  
Chemical Industry ◽  
Iron Concentration ◽  
Chemical Processes ◽  
Solid Particles ◽  
Common Elements ◽  
Physical Chemical

Iron is one of the most common elements in ground water. Bythe HN 24:2003 iron concentration in water can‘t be higher than200 μg/l. Water treatment with an acoustic field is a very relevanttopic. Acoustic field is widely used in industrion, medicine,chemical industry and manufacturing. When water is affectedby ultrasound, physical-chemical processes begin. Ultrasoundvibrations lead to dispersion, degasation and coagulation. Ironparticles connect to each other when distance between them istwo times bigger then their own radius. R = 2R. And if thisprocess continues particles connect one by one. In this article teststand and methodics using ultrasonic piezoceramic are shown. Santrauka Geležis – dažniausiai požeminiuose vandenyse aptinkama priemaiša, kuri prastina geriamojo vandens savybes, todėl būtina bendrosios geležies koncentraciją sumažinti iki 0,2 mg/l. Vienas iš geležies šalinimo būdu yra paremtas ultragarso panaudojimu. Straipsnyje glaustai aptarti bendrosios geležies būviai vandenyje, jos šalinimo metodai ir pateikta eksperimentinė metodika. Eksperimentas atliktas naudojant skirtingų dažnių garso bangas nuo 8 kHz iki 20 kHz diapazone. Akustinio lauko daromai įtakai nustatyti, naudojant skirtingų dažnių garso bangas, buvo panaudoti trys skirtingi vandens debitai. Iš gautų rezultatų suformuluotos išvados.

Use of Wood Biomass in Slovakia

2014 ◽  
Vol 1001 ◽  
pp. 126-130
Author(s):  
Tomáš Bakalár ◽  
Henrieta Pavolová ◽  
Milan Búgel ◽  
Ľubica Kozáková
Keyword(s):  
Energy Source ◽  
Renewable Energy Source ◽  
Renewable Energy ◽  
Organic Material ◽  
Chemical Processes ◽  
Wood Chips ◽  
Wood Biomass ◽  
Biochemical Processes ◽  
Physical Chemical ◽  
Thermochemical Processes

Biomass is organic material, the second most important source of energy. Biomass is a renewable energy source. Wood biomass is used as source of energy for heating in many regions in Slovakia. It is because of its availability. Wood biomass is an easily accessible and affordable source of energy. At present, thermochemical processes, biochemical processes and physical-chemical processes are used for biomass utilization. In the article a suitable technology for combustion of wood chips is proposed. It consists of five main technological parts: transport of wood chips, silo, combustion boiler, and stack.

Systems Based on Physical-Chemical Processes

2017 ◽  
pp. 43-75
Author(s):  
August Bonmatí-Blasi ◽  
Míriam Cerrillo-Moreno ◽  
Victor Riau-Arenas
Keyword(s):  
Membrane Separation ◽  
Treatment Plant ◽  
High Strength ◽  
Resource Depletion ◽  
Nutrient Content ◽  
Chemical Processes ◽  
Waste Streams ◽  
Physical Chemical ◽  
Soil Emissions ◽  
Struvite Precipitation

High strength waste streams, namely rejected water from a wastewater treatment plant, livestock slurry, and agro-food wastewater, are characterized by its high organic matter and nutrient content which favours processes aiming to recover energy and nutrients, instead of removing them. In this regard physical-chemical processes are suitable technologies to attain these objectives. Among others, stripping coupled with absorption, struvite precipitation, membrane separation, and vacuum evaporation, are all physical-chemical processes aiming to concentrate nutrients in a stream that can later be reused as fertilizer. In this chapter the main physical-chemical processes will be defined and described in terms of the objective of each process technique, their theoretical fundamentals, environmental effects (air, water and soil emissions, resource depletion), technical indicators (efficiencies, energy consumption, etc.), and by-product characteristics.

Sign in / Sign up

Export Citation Format

Share Document