Microstructure peculiarities of carbon materials based on coal-tar pitch hardened on the surface of thermally expanded graphite flakes

2013 ◽  
Vol 47 (6) ◽  
pp. 365-369 ◽  
Author(s):  
A. V. Dmitriev
2008 ◽  
Vol 42 (3) ◽  
pp. 163-164 ◽  
Author(s):  
T. P. Miloshenko ◽  
O. Yu. Fetisova ◽  
M. L. Shchipko ◽  
B. N. Kuznetsov

2020 ◽  
Vol 64 (10) ◽  
pp. 98-103
Author(s):  
Anna N. Popova ◽  

The work is devoted to the study of changes in the basic structural characteristics of coal tar pitch during carbonization with various carbon additives that have different textural characteristics. An industrial medium-temperature coal tar pitch with a softening temperature of 87 °C was taken as a starting material, nanosized carbon material "Kemerit", nanotubes, activated carbon, and thermally expanded graphite are considered as carbon additives. It was found in the work that the entire range of considered carbon additives significantly increases the yield of coke residue, while it was noted that a decrease in the amount of released volatile products during the destruction of pitch during its thermal transformation was observed, which is very important for carcinogenic compounds. Of the selected series of carbon additives, the maximum amount of solid residue is formed when nanostructured carbon additives (nanotubes and nanosized carbon material "Kemerit") are introduced into coal tar pitch. The structural characteristics of coal tar pitch before and after the carbonization process, as well as all carbon additives considered in the work, were investigated by the complex of X-ray diffraction methods (X-ray phase and X-ray structural methods of analysis). It was revealed that the formed carbon material, when nanotubes and Kemerite are added to coal tar pitch, is characterized by a more disordered structure when compared with the structure of individual coal tar pitch. The addition of thermally expanded graphite into coal tar pitch promotes the formation of graphite-like structures during pitch carbonization and reduces the amount of volatile carcinogenic compounds during thermal destruction to a greater extent when compared with amorphous carbon additives.


2015 ◽  
Vol 17 (2) ◽  
pp. 87 ◽  
Author(s):  
Ch.N. Barnakov ◽  
G.P. Khokhlova ◽  
A.N. Popova ◽  
S.A. Sozinov ◽  
Z.R. Ismagilov

The structure of some commercial graphites and carbon materials (CMs) obtained by the low-temperature catalytic graphitization of coal tar pitch with iron salt, needle coke, foamed graphite as the catalysts has been studied. The study was performed using the X-ray diffraction technique with reflections from base plane and their decomposition into two components corresponding to the structural phases of graphite which have different XRD characteristics. Various CMs were compared with respect to the structural phase ratio, distance between polyarene layers in these phases, and sizes of the coherent scattering regions. The (004) reflection provided a better fit of some properties of graphites to the calculated XRD characteristics as compared to calculation from the (002) reflection. In the case of carbonization of coal tar pitch with investigated catalyst additions, prepared carbon materials have a higher degree of graphitization and a crystallite size greater than in the other case of carbonization of the individual pitch. The highest catalytic activity is shown by foamed graphite. It was found that the use of foamed graphite as the catalyst at 800-900 ºC produced carbon materials possessing a crystalline structure with interplanar spacing close to that in commercial graphites, while in the absence of catalyst the coal tar pitch material has an amorphous structure.


2006 ◽  
Vol 172 (3) ◽  
pp. 424-430 ◽  
Author(s):  
C.Q. Ren ◽  
T.H. Li ◽  
Q.L. Lin ◽  
H. Li ◽  
X.Y. Sun

2021 ◽  
Vol 340 ◽  
pp. 01035
Author(s):  
Maxim V. Popov ◽  
Alexander G. Bannov ◽  
Stepan I. Yusin

In this paper, the electrochemical and texture characteristics of electrode materials made of a number of promising carbon materials for supercapacitors were considered. Carbon nanofibers, thermally expanded graphite, and activated carbon derived from rice hulls were used as electrodes for supercapacitors. The paper presents a technique of synthesis of these electrode materials. A comparison of the capacitive characteristics of the electrodes using two-electrode scheme was carried out.


2014 ◽  
Vol 602-603 ◽  
pp. 304-307 ◽  
Author(s):  
Wu Chao Shi ◽  
Li Min Dong ◽  
Qiang Li ◽  
Chen Wang ◽  
Tong Xiang Liang

Coal tar pitch (CTP) as carbon material was studied using 1,4-Benzenedimethanol (PXG) as modifier by p-toluene sulfonic acid (PTS) catalyst and the variety of rheological properties of modified coal tar pitch (MTP) was discussed. The apparent viscosity of CTP and MTP were measured using rotating coaxial-cylinder viscometer, and the relations between the apparent viscosity and temperature were studied. Thermal behaviors of CTP and MTP were analyzed with TG-DSC. The results showed that the viscosity of the MTP gradually decreased with the temperature rising and the viscous activation energy of the MTP is 72.92 kJ·mol-1, which was beneficial to the process for producing carbon materials and the carbon yield was greatly improved. Therefore, coal tar pitch modified with PXG was qualified to be an excellent carbon precursor.


2016 ◽  
Vol 18 (3) ◽  
Author(s):  
Maciej Gubernat ◽  
Janusz Tomala ◽  
Wilhelm Frohs ◽  
Aneta Fraczek-Szczypta ◽  
Stanislaw Blazewicz

2010 ◽  
Vol 44 (2) ◽  
pp. 112-117 ◽  
Author(s):  
O. S. Efimova ◽  
G. P. Khokhlova ◽  
Yu. F. Patrakov

2017 ◽  
Vol 36 (10) ◽  
pp. 979-984
Author(s):  
X.H. Zuo ◽  
Z.J. Dong ◽  
G.M. Yuan ◽  
Z.W. Cui ◽  
X.K. Li

AbstractWith toluene soluble fraction of coal tar pitch, polycarbosilane and pyridine borane as raw materials, the modification coal tar pitch was synthesized by a liquid method. The B-Si-doped carbon materials were obtained by carbonization treatment at 800–1,600 °C for 1 h. The effects of carbonization temperatures on the composition, microstructure and oxidation resistance of the B-Si-doped carbon materials were investigated by XRD, SEM and TG-DSC. The results showed that the B-Si-doped carbon materials were composed of B2O3 and carbon. SiC crystal grains appeared when the carbonization temperatures were over 1,200 °C. The higher the carbonization temperatures were, the larger the SiC grain sizes of B-Si-doped carbon materials became. But oxidation rate of larger grain sizes of SiC was slow during oxidation. It was difficult to form a protective glassy film on the surface of the materials rapidly. Therefore, the B-Si-doped carbon materials obtained by carbonization at 1,200 °C showed better oxidation resistance. Oxidation resistance mechanism of B-Si-doped carbon materials was illustrated. The SiO2 produced by the oxidation of SiC and B2O3 formed protective glassy film, which had self-healing and anti-oxidation synergism.


Sign in / Sign up

Export Citation Format

Share Document