Helping when desire is low: The role of Expectancy in helping

2020 ◽  
Author(s):  
Małgorzata Kossowska
Keyword(s):  
Experimental Studies ◽  
Helping Behavior ◽  
Perceived Effectiveness ◽  
Do So

One might assume that the desire to help (here described as Want) is the essential driver of helping declarations and/or behaviors. However, even if desire to help is low, helping behavior may still occur if the expectancy regarding the perceived effectiveness of helping is high. We tested these predictions in a set of three experimental studies. In all three, we measured the desire to help (Want) and the Expectancy that the aid would be impactful for the victim; in addition, we manipulated Expectancy in Study 3. In Studies 1 and 3, we measured the participants’ declaration to help while in Study 2, their helping behavior was examined. In all three studies, we used variations of the same story about a victim. The results supported our hypothesis. Thus, the studies help to tease apart the determinants of helping behavior under conditions of lowered desire to do so, an issue of great importance in public policymaking.

scholarly journals Helping when the desire is low: Expectancy as a booster

2020 ◽  
Vol 44 (6) ◽  
pp. 819-831
Author(s):  
Małgorzata Kossowska ◽  
Ewa Szumowska ◽  
Paulina Szwed ◽  
Aneta Czernatowicz-Kukuczka ◽  
Arie W. Kruglanski
Keyword(s):  
Experimental Studies ◽  
Helping Behavior ◽  
Perceived Effectiveness ◽  
Do So

Abstract One might assume that the desire to help (here described as Want) is the essential driver of helping declarations and/or behaviors. However, even if desire to help (Want) is low, intention to help may still occur if the expectancy regarding the perceived effectiveness of helping is high. We tested these predictions in a set of three experimental studies. In all three, we measured the desire to help (Want) and the Expectancy that the aid would be impactful for the victim; in addition, we manipulated Expectancy in Study 3. In Studies 1 and 3, we measured the participants’ declaration to help while in Study 2, their helping behavior was examined. In all three studies, we used variations of the same story about a victim. The results supported our hypothesis. Thus, the studies help to tease apart the determinants of helping under conditions of lowered desire to do so, an issue of great importance in public policymaking.

Should I ‘check my emotions at the door?’ or express how I feel? Role of emotional regulation versus expression by leaders speaking out against prejudice in the workplace

2021 ◽  
Author(s):  
Meg Aum Warren ◽  
Tejvir Sekhon ◽  
Katie M. Winkelman ◽  
Rachael J Waldrop
Keyword(s):  
Impression Management ◽  
Emotional Expression ◽  
Emotional Regulation ◽  
Emotional Experience ◽  
Experimental Studies ◽  
Emotional Experiences ◽  
Speaking Out ◽  
Relational Concerns ◽  
Do So

In response to prejudiced behaviors, the emotional experience of leaders influences whether and how they confront prejudice, but more importantly, their emotional expression serves a crucial communicative function to signal to observers the motivations and characteristics of the leaders and the organization. A qualitative study of exceptional allies revealed that even those committed to confronting prejudice are afraid to do so because of impression management and relational concerns. When they do act, their emotional experiences of empathic sadness on behalf of the stigmatized target or anger toward the transgressor spur action whereas not intervening leads to feelings of guilt. However, they struggle with regulating these emotions due to the belief that non-emotional confrontations are better received by others. On the contrary, two experimental studies showed that the same verbal confrontation accompanied by anger (versus not) is viewed as more sincere and in fact, improves the impressions of the leader and the organization.

A Re-Appraisal of the Role of Blood Coagulation and Platelets in the Generalized Shwartzman Phenomenon

1966 ◽  
Vol 15 (03/04) ◽  
pp. 519-538 ◽  
Author(s):  
J Levin ◽  
E Beck
Keyword(s):  
Blood Coagulation ◽  
The State ◽  
Coagulation System ◽  
Renal Lesions ◽  
Intravascular Coagulation ◽  
Renal Glomeruli ◽  
Coagulation Mechanism ◽  
Shwartzman Phenomenon ◽  
Do So

SummaryThe role of intravascular coagulation in the production of the generalized Shwartzman phenomenon has been evaluated. The administration of endotoxin to animals prepared with Thorotrast results in activation of the coagulation mechanism with the resultant deposition of fibrinoid material in the renal glomeruli. Anticoagulation prevents alterations in the state of the coagulation system and inhibits development of the renal lesions. Platelets are not primarily involved. Platelet antiserum produces similar lesions in animals prepared with Thorotrast, but appears to do so in a manner which does not significantly involve intravascular coagulation.The production of adrenal cortical hemorrhage, comparable to that seen in the Waterhouse-Friderichsen syndrome, following the administration of endotoxin to animals that had previously received ACTH does not require intravascular coagulation and may not be a manifestation of the generalized Shwartzman phenomenon.

‘Wheels have been set in motion’: Geocentrism and Relativity in Tom Stoppard’s Rosencrantz and Guildenstern Are Dead

2018 ◽  
Author(s):  
Liliane Campos
Keyword(s):  
20Th Century ◽  
Film Adaptation ◽  
Frames Of Reference ◽  
Quantum Uncertainty ◽  
Galilean Relativity ◽  
Modern Physics ◽  
20Th Century Physics ◽  
Time Specific ◽  
Do So

By decentring our reading of Hamlet, Stoppard’s tragicomedy questions the legitimacy of centres and of stable frames of reference. So Liliane Campos examines how Stoppard plays with the physical and cosmological models he finds in Hamlet, particularly those of the wheel and the compass, and gives a new scientific depth to the fear that time is ‘out of joint’. In both his play and his own film adaptation, Stoppard’s rewriting gives a 20th-century twist to these metaphors, through references to relativity, indeterminacy, and the role of the observer. When they refer to the uncontrollable wheels of their fate, his characters no longer describe the destruction of order, but uncertainty about which order is at work, whether heliocentric or geocentric, random or tragic. When they express their loss of bearings, they do so through the thought experiments of modern physics, from Galilean relativity to quantum uncertainty, drawing our attention to shifting frames of reference. Much like Schrödinger’s cat, Stoppard’s Rosencrantz and Guildenstern are both dead and alive. As we observe their predicament, Campos argues, we are placed in the paradoxical position of the observer in 20th-century physics, and constantly reminded that our time-specific relation to the canon inevitably determines our interpretation.

Calculation-and-experimental estimation of the role of the frequency ratio in changing the endurance at two-frequency deformation modes

2019 ◽  
Vol 85 (1(I)) ◽  
pp. 64-71 ◽  
Author(s):  
M. M. Gadenin
Keyword(s):  
High Frequency ◽  
Experimental Studies ◽  
Low Frequency ◽  
Reduction Factor ◽  
Single Frequency ◽  
Cyclic Loads ◽  
Small Ratio ◽  
Harmonic Components ◽  
Deformation Modes

The cycle configuration at two-frequency loading regimes depends on the number of parameters including the absolute values of the frequencies and amplitudes of the low-frequency and high-frequency loads added during this mode, the ratio of their frequencies and amplitudes, as well as the phase shift between these harmonic components, the latter having a significant effect only with a small ratio of frequencies. Presence of such two-frequency regimes or service loading conditions for parts of machines and structures schematized by them can significantly reduce their endurance. Using the results of experimental studies of changes in the endurance of a two-frequency loading of specimens of cyclically stable, cyclically softened and cyclically hardened steels under rigid conditions we have shown that decrease in the endurance under the aforementioned conditions depends on the ratio of frequencies and amplitudes of operation low-frequency low-cycle and high-frequency vibration stresses, and, moreover, the higher the level of the ratios of amplitudes and frequencies of those stacked harmonic processes of loading the greater the effect. It is shown that estimation of such a decrease in the endurance compared to a single frequency loading equal in the total stress (strains) amplitudes can be carried out using an exponential expression coupling those endurances through a parameter (reduction factor) containing the ratio of frequencies and amplitudes of operation cyclic loads and characteristic of the material. The reduction is illustrated by a set of calculation-experimental curves on the corresponding diagrams for each of the considered types of materials and compared with the experimental data.

The capacity of short term memory from an evolutionary perspective

2019 ◽  
Author(s):  
Majid Manoochehri
Keyword(s):  
Short Term Memory ◽  
Memory Span ◽  
Critical Role ◽  
Experimental Studies ◽  
Cognitive System ◽  
Evolutionary Approach ◽  
Evolutionary Perspective ◽  
Short Term ◽  
Term Memory

Memory span in humans has been intensely studied for more than a century. In spite of the critical role of memory span in our cognitive system, which intensifies the importance of fundamental determinants of its evolution, few studies have investigated it by taking an evolutionary approach. Overall, we know hardly anything about the evolution of memory components. In the present study, I briefly review the experimental studies of memory span in humans and non-human animals and shortly discuss some of the relevant evolutionary hypotheses.

History and Transport Policy

Transfers ◽  
2014 ◽  
Vol 4 (1) ◽  
pp. 45-62 ◽  
Author(s):  
Ueli Haefeli ◽  
Fritz Kobi ◽  
Ulrich Seewer
Keyword(s):  
Knowledge Transfer ◽  
Transport Policy ◽  
Science And Policy ◽  
Direct Knowledge ◽  
Academic System ◽  
Decision Making Processes ◽  
Policy And Planning ◽  
Policy Solutions ◽  
Do So

Based on analysis of two case studies in the Canton of Bern, this article examines the question of knowledge transfer from history to transport policy and planning in the recent past in Switzerland. It shows that for several reasons, direct knowledge transfer did not occur. In particular, historians have seldom become actively involved in transport planning and policy discourses, probably partly because the academic system offers no incentive to do so. However, historical knowledge has certainly influenced decision-making processes indirectly, via personal reflection of the actors in the world of practice or through Switzerland's strongly developed modes of political participation. Because the potential for knowledge transfer to contribute to better policy solutions has not been fully utilized, we recommend strengthening the role of existing interfaces between science and policy.

Stative Morpheme In Shimakonde, An Anticausative Morpheme?

2017 ◽  
Vol 19 ◽  
pp. 343-376
Author(s):  
Ronaldo Rodrigues De Paula
Keyword(s):  
External Argument ◽  
Bantu Language ◽  
Northern Regions ◽  
Do So

Tis paper aims to describe the syntax of the constructions that present the verbal extensions {-ik-} and {-uk-} and their allomorphs in Shimakonde, a Bantu language classifed as P23 in the Guthrie classifcation (GUTHRIE 1967-71). Tis language is spoken in the northern regions of Mozambique and Tanzania. Tese verbal extensions are reported in literature under the labels of stative, impositive, pseudo-passive, neuter, and quasi-passive (DOKE, 1947; SATYO, 1985; MCHOMBO, 1993; DUBINSKY SIMANGO, 1996; BENTLEY KULEMEKA, 2001; LIPHOLA, 2001; NGUNGA, 2004; KHUMALO, 2009; LEACH, 2010; LANGA, 2013). Te addition of the {-ik-} or {-uk-} morphemes to the verb structure usually demotes or suppresses the external argument, turning a basically transitive predicate into an intransitive one. Tis paper aims to investigate in Shimakonde if alternations from a dyadic to a monadic predicate, through the use of one of the aforementioned morphemes, are instances of the phenomenon known in literature as causative/ anticausative alternation (HASPELMATH, 1987, 1993; LEVIN RAPPAPORT HOVAV, 1992, 1995; NAVES, 1998, 2005; VAN HOUT, 2004; OLIVEIRA, 2011; KALLULLI, 2007). In order to do so, I analyze the grammatical role of this morpheme with two Shimakonde native consultants from different Mozambique districts (Mocimboa da Praia and Montepuez). Te feldwork activities consisted of translations of sentences from Portuguese to Shimakonde, testing the grammaticality of the proposed sentences. In order to examine the data that were collected, I adopted the Alexiadou, Anagnostopoulou and Schäfer (2006) refnement of the verbal categories by Levin Rappaport Hovav (1992, 1995). One of the results obtained is that the verbal extensions display an atelic reading (giving rise to stative interpretation) or a telic reading (giving rise to anticausative or passive interpretation). To account for the different interpretations in these constructions, I propose distinct associations between Asp head and Voice head in accordance with Kratzer (1996), Pylkkänen (2002), van Hout (2004), and Oliveira (2010).

The methodology of experimental research of the feed components extrusion process in order to improve its energy performance

2020 ◽  
pp. 147-152
Author(s):  
E. M. Ratnikov ◽  
D. O. Milko
Keyword(s):  
Experimental Studies ◽  
Energy Performance ◽  
Extrusion Process ◽  
Mathematical Methods ◽  
Screw Extruder ◽  
Mathematical Planning ◽  
Factors Affecting ◽  
Extrusion Processing ◽  
Definition Of

Annotation Purpose. Development of a program and methods for conducting experimental studies of the extrusion process with the definition of parameters and modes of operation of the extruder to improve its energy performance. Methods. Methods of mathematical statistics, synthesis, analysis, description and modeling were used. Results. The application of mathematical methods, in particular mathematical planning, reduces the number of experiments several times, and allows to evaluate the role of influencing factors, obtain a mathematical model of the process and determine the optimal conditions for its parameters and modes, etc. Conclusions. The methodology for experimental studies of a screw extruder is presented with the necessary equipment and methodology for processing the obtained experimental data. A mathematical method of planning, which reduces the number of experiments several times, allows us to evaluate the role of factors affecting productivity and energy intensity is presented. Keywords: extruder, auger, nutrients, research methodology, extrusion, processing, feed.

Sign in / Sign up

Export Citation Format

Share Document