scholarly journals Test Various Media Against Lettuce Plant Growth (Lactuca Sativa L.) Hydroponics.

AGRIFOR ◽  
2018 ◽  
Vol 17 (1) ◽  
pp. 7
Author(s):  
Agus Trikoriantono
Keyword(s):  
Block Design ◽  
Stem Diameter ◽  
Lettuce Plant ◽  
Plant Weight ◽  
Media Usage ◽  
Lactuca Sativa L ◽  
Randomized Block Design ◽  
Interaction Treatment ◽  
Number Of Leaves ◽  
Nutrient Feeding

This research was conducted in STIPER Muhammadiyah Tanah Grogot for 3 (two) months. This study aims to determine the effect of planting media usage and proper nutrition on the growth of lettuce plants with hydroponics system.The experimental design used was a two factor factorial and three replications arranged in a randomized block design (RAK). The first factor was using treatment of planting medium consisting of three levels, namely P1 = Using sawdust planting media, P2 = using the medium of husk charcoal planting, P3 = using the planting medium of straw. The second factor is using Nutrition Addition treatment consisting of two levels, namely Q1 = Using Good Plant Nutrition, Q2 = Using Hydro J Nutrition.The results showed that: Planting media (P) has a significant effect on stem diameter. In the treatment of Nutrition (Q) has significant effect on leaf number, stem diameter and root length, and very significant effect on plant weight. The interaction treatment between planting medium and nutrient feeding significantly affected the growth of plant height and number of leaves.

scholarly journals PERTUMBUHAN DAN PRODUKSI TANAMAN JAGUNG PROLIFIK PADA BERBAGAI JARAK TANAM DALAM BARIS DENGAN SISTEM TANAM JAJAR LEGOWO

2020 ◽  
Vol 4 (1) ◽  
pp. 13-23
Author(s):  
Intan Dwi Lestari
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Block Design ◽  
Stem Diameter ◽  
Growth And Yield ◽  
Area Index ◽  
Plant Weight ◽  
South Sulawesi ◽  
Randomized Block Design ◽  
Number Of Leaves

This research aimed to determine the effect of spacing on the growth and yield of corn. It was conducted from July to November 2019 at the Experimental Plantation of Cereal Crops Research Institute (BalitSereal), Maros, South Sulawesi. The experimental method used was a randomized block design consisting of 4 treatments: J1= (100 cm x 50 cm) x 20 cm, one seed per hole; J2= (100 cm x 50 cm) x 30 cm, alternating between one seed per hole and two seeds per hole; J3= (100 cm x 50 cm) x 40 cm, two seeds per hole; J4= (100 cm x 50 cm) x 15 cm, one seed per hole. The observed variables were plant height, number of leaves, stem diameter, leaf area index, Anthesis Silking Interval (ASI), length of cob 1 and cob 2, diameter of cob 1 and cob 2, weight of shelled seeds/plant, weight of 100 seeds on cob 1 and cob 2, and production of shelled seeds/hectare. The experimental results showed that plant spacing affected the growth and production of maize. The J3 spacing (100 cm x 50 cm) x 40 cm with two seeds per hole significantly affected the leaf area index and gave the highest average stem diameter. The J2 spacing with (100 cm x 50 cm) x 30 cm with alternating between one seed per hole and two seeds per hole produced the highest production in terms of weight of shelled seeds/plant, weight of 100 seeds and yield of shelled seeds/hectare.

scholarly journals PENGARUH TAKARAN PUPUK ORGANIK DAN ANORGANIK TERHADAP PERTUMBUHAN DAN PRODUKSI TANAMAN SELADA (Lactuca sativa L.)

2018 ◽  
Vol 13 (1) ◽  
pp. 1
Author(s):  
Meci Yuniastuti Rahma
Keyword(s):  
Block Design ◽  
Organic Fertilizer ◽  
Dry Weight ◽  
Cow Manure ◽  
Lettuce Plant ◽  
Lactuca Sativa L ◽  
Randomized Block Design ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Npk Fertilizer

The research objective was to study the effect of organic and inorganic fertilizer on the growth and production of lettuce. This research was conducted from February 2017 to April 2017 at Green House, Faculty of Agricultural,Sjakhyakirti University Palembang. The research used Randomized Block Design (RAK) with 12 treatments and repeated 3 times. The treatment in this research was K (50 g.crop-1 cowmanure and 0 g.crop-1NPK fertilizer), L (50 g.crop-1 cow manure and 1 g.crop-1 NPK fertilizer ), M (50 g.crop-1 cow manure and 2 g.crop-1 NPK fertilizer), N (50 g.crop-1 cow manure and 3 g.crop-1NPK fertilizer), O ( 80 g.crop-1 cow manure and 0 g.crop-1 NPKfertilizer), P (80 g.crop-1 cow manure and 1 g.crop-1 NPK fertilizer), Q (80 g.crop-1 cow manure and 2 g.crop-1NPK fertilizer), R (80 g.crop-1 cow manure and 3 g.crop-1NPK fertilizer), S (110 g.crop-1 cow manure and 0 g.crop-1 NPK fertilizer), T (110 g.crop-1 cow manure and 1 g.crop-1NPK fertilizer), U (110 g.crop-1 cow manure and 2 g.crop-1 NPK fertilizer), V (110 g.crop-1 cow manure and 3 g.crop-1 NPK fertilizer). The variables observed in this study were plant height (cm), number of leaves (strands), number of roots, wet weight of plant (g), dry weight of plant (g). The results showed that the organic fertilizer of cow manure and inorganic NPK fertilizer have no significant effect on the growth but has a significant effect on the production of lettuce plant. However, the U (110 g.crop-1 cow manure and 3 g.crop-1 NPK fertilizer) showed the best production of many leaves and wet trimming weight of lettuce.

The Effect of Soybean Pulp Planting Media Use on the Growth and Production of Lettuce Plants (Lactuca Sativa L.)

Nabatia ◽  
2016 ◽  
Vol 4 (1) ◽  
pp. 25-35
Author(s):  
Ahmad Mauludin Zakaria ◽  
Agus Miftakhurrohmat
Keyword(s):  
Lactuca Sativa ◽  
Block Design ◽  
Single Factor ◽  
Lettuce Plant ◽  
Lactuca Sativa L ◽  
Randomized Block Design ◽  
Best Response ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Single Factor Experiment

This study aims to determine the effect of the use of tofu dregs growing media on the growth and production of lettuce (Lactuca sativa L.). The study was conducted in July 2015 to September 2015 on polybag land in Kedung Peluk Village, Candi District, Sidoarjo Regency. This place is 20 m above sea level. A single factor experiment was arranged in a Randomized Block Design with 10 levels of combination treatment between soybean pulp and soil consisting of A1 = 0% soybean pulp and 100% soil, A2 = 10% soybean pulp and 90% soil, A3 = 15% soybean pulp and 85% soil, A4 = 20% soybean pulp and 80% soil, A5 = 25% soybean pulp and 75% soil, A6 = 30% soybean pulp and 70% soil, A7 = 35% soybean pulp and 65% soil, A8 = 40% soybean pulp and 60% soil, A9 = 45% soybean pulp and 55% soil, A10 = 50% soybean pulp and 50% soil. From the ten treatments, it was repeated 3 times and obtained 30 units of trials. The results showed that the treatment of using soybean pulp media with a combination of 20% soy- bean pulp and 80% soil gave the best response to lettuce plant growth, namely on plant height, leaf width, number of leaves, root length, wet weight of the upper part of the plant and total weight.

scholarly journals Kompetisi beberapa jenis gulma terhadap pertumbuhan awal beberapa varietas tanaman tebu (Saccharum officinarum L.)

2020 ◽  
Vol 1 (1) ◽  
pp. 21
Author(s):  
Dentin Queentiara Moelyaandani ◽  
S Setiyono
Keyword(s):  
Block Design ◽  
Saccharum Officinarum ◽  
Cyperus Rotundus ◽  
Stem Diameter ◽  
Initial Growth ◽  
High Productivity ◽  
Sugarcane Varieties ◽  
Randomized Block Design ◽  
Best Response ◽  
Number Of Leaves

Sugarcane (Sacharum officinarum L.) is a sugar-producing plant and is a food commodity that is needed by the people of Indonesia. National sugar demands are increasing every year. The low productivity of sugarcane is due to the competition of weeds which can reduce sugarcane production. To achieve high productivity, it is necessary to pay attention to the varieties used because they require certain conditions in their management. The purpose of this study was to determine the effect of varieties and types of weeds on the initial growth of sugarcane. The study was conducted from September 2018 to December 2018. The study used factorial Randomized Block Design (RBD) with two factors and four replications. The first factor consists of 4 sugarcane varieties, namely: Bululawang (V1), Red HW (V2), VMC (V3) and PS 862 (V4). The second factor type of weed consists of 2 types, namely Cyperus rotundus (N1) and Amaranthus spinosus L. (N2). The results showed that (1) There was interaction between the varieties (V) and the weed types (N) in stem diameter parameters and number of tillers, the treatment V4N1 gives the best response to stem diameter 1,31 cm and 4,25 number of tillers; (2) The treatment of varieties (V) gives affects to stem diameter and number of leaves, the treatment V4 gives the best response 5,38 to number of leaves; (3) Types of thorn spinach weeds can reduce the initial growth of sugarcane. Keywords: Varieties; weed; sugarcane

scholarly journals Tanggap Pertumbuhan Bibit Tebu Merah (Saccharum officinarum L.) Asal Bud Set terhadap Pemangkasan dan Frekuensi Penyiraman

2018 ◽  
Vol 5 (1) ◽  
pp. 136-146
Author(s):  
Supriadi Hartanto ◽  
Irsal ◽  
Asil Barus
Keyword(s):  
Block Design ◽  
Saccharum Officinarum ◽  
Research Field ◽  
Stem Diameter ◽  
Randomized Block Design ◽  
Bud Set ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Plant Stem ◽  
Weight Pruning

This research was conducted to determine the growth of red sugarcane seedling on pruning and frequency of watering. This research was conducted in the research field of Faculty of Agriculture University of Sumatera Utara (± 25 m asl) from June-October 2017 using Factorial Randomized Block Design with three replications. The first factor was pruning (control, 1, and 2 months/plant) as well as the second factor was the frequency of watering (1, 3, 5, and 7 days/plants). The variable observed were plant height, a number of leaves, stem diameter, a number of the tiller, shoot wet weight, root wet weight, and shoot-root ratio. The results showed that the frequency of watering treatment had a significant effect on the number of a leaf (4,6,8,10 and 12 weeks after plant), stem diameter (4,6,8,10 and 12 weeks after plant), shoot wet weight, and root wet weight. Pruning treatment had no significant effect on all variables observed. The interaction of both has no significant effect on all variables observed.

scholarly journals The effect of combination of AB-mix nutrition with liquid organic fertilizer of tofu liquid waste on hydroponical growth and production of lettage (Lactuca sativa L.)

2021 ◽  
Vol 4 (1) ◽  
pp. 165-170
Author(s):  
Arnis En Yulia ◽  
Murniati ◽  
Isna Rahma Dini ◽  
Laila Manja
Keyword(s):  
Block Design ◽  
Organic Fertilizer ◽  
Liquid Waste ◽  
Leaf Length ◽  
Growth And Yield ◽  
Fresh Weight ◽  
Root Volume ◽  
Lactuca Sativa L ◽  
Randomized Block Design ◽  
Number Of Leaves

This study aims to determine the effect of the combination of AB mix nutrients with liquid organic fertilizer (LOF) of tofu liquid waste on the growth and yield of lettuce plants and to obtain the best combination for the growth and yield of lettuce hydroponically. This study used a non-factorial Randomized Block Design (RBD), consisting of a comparison of nutritional treatments, namely: N1 = 100% AB mix + 0% LOF of liquid waste tofu, N2= 75% AB mix + 25% LOF of tofu liquid waste, N3= 50% AB mix + 50% LOF of tofu liquid waste, N4= 25% AB mix + 75 % LOF of tofu liquid waste, N5= 100% LOF of waste liquid tofu which consists of 4 replications. Parameters observed were plant height, number of leaves, leaf length, leaf width, root length, fresh weight, root volume and weight fit for consumption. The results showed that the administration of 50% AB mix + 50% LOF of tofu liquid waste and 25% AB mix + 75% LOF of tofu liquid waste showed results that tended to be the same but the results of the combination of 75% AB mix + 25% LOF of tofu liquid waste were higher. On the parameters of the number of leaves is 11.12 strands, fresh weight is 66.40 g and suitable weight for consumption is 58.31 g.

scholarly journals Perbaikan Beberapa Sifat Kimia Tanah Ultisol Dengan Pemberian Bokashi Bungkil Inti Sawit (BIS) Terhadap Pertumbuhan Bibit Kelapa Sawit

2019 ◽  
Vol 1 (2) ◽  
pp. 119 ◽  
Author(s):  
Hema Malini
Keyword(s):  
Plant Height ◽  
Soil Ph ◽  
Block Design ◽  
Palm Kernel ◽  
Stem Diameter ◽  
Plant Weight ◽  
Organic C ◽  
Kernel Meal ◽  
Number Of Leaves ◽  
Palm Kernel Meal

The purpose of this study was to improve some of the chemical properties of Ultisol soil by giving Palm oil bokashi and to determine the effect of the best bokashi doses for the growth of oil palm seedlings.This research was conducted for 6 months starting in June until December 2017. The research location was at Jl. Mount Lingai North Samarinda. The design used was a randomized block design consisting of nine treatments and three replications. The treatment consisted of (P0) 0 g bokashi polybag-1, (P1) 100 g bokashi polybag-1, (P2) 200 g bokashi polybag-1, (P3) 300 g bokashi polybag-1, (P4) 400 g bokashi polybag-1, (P5) 500 g bokashi polybag-1, (P6) 600 g bokashi polybag-1, (P7) 700 g bokashi polybag-1, (P8) 800 g bokashi polybag-1. Soil samples were composited, then analyzed in the laboratory with the parameters of soil pH, organic C, N and C/N ratio. Plant data analyzed were plant height, number of leaves, stem diameter and plant weight. If it is significant then the LSD test will be at the level of 5%. The results showed that bokashi administration could improve soil pH, organic C, N and C/N ratio on Ultisol soil. Giving Bokashi Palm kernel meal obtained a soil pH of 4.57; Organic C 7.48; N 0,420; C/N Ratio of 19.45 in Ultisol soil. The application of Bokashi Palm kernel meal at a dose of 800 g polybag-1 in treatment P8 showed a significant effect on leaf number and plant weight, a very significant effect on plant height and stem diameter. The average plant height is 85.77 cm; average number of leaves 12.67; stem diameter of 4.90 cm; plant weight of 3.07 kg.

scholarly journals Respons Pertumbuhan Dan Produksi Dua Varietas Selada (Lactuca Sativa L.) Terhadap Pemberian Berbagai Sumber Nitrogen

1970 ◽  
Vol 5 (2) ◽  
pp. 177-182
Author(s):  
Jepriwira K. Ginting ◽  
Jonis Ginting ◽  
Nini Rahmawati
Keyword(s):  
Plant Height ◽  
Lactuca Sativa ◽  
Block Design ◽  
Organic Fertilizer ◽  
Chicken Manure ◽  
Fresh Weight ◽  
Lactuca Sativa L ◽  
Randomized Block Design ◽  
Sample Application ◽  
Number Of Leaves

The research aims to determine the growth and production response of two varieties of lettuce (Lactuca sativa L.) to the provision of various sources of nitrogen. This research was conducted in Lambar village, Tigapanah sub-district, Karo regency, Sumatera Utara Province with altitude of ± 1200 meters above sea level, which started on July to September 2017. This research used a factorial randomized block design with 2 factors namely varieties of lettuce (crop and lettuce) and sources of nitrogen (urea fertilizer, chicken manure and Liquid organic fertilizer of rabbit urine). The parameters observed were plant height, greenish leaves, crop circle, fresh weight of plant per sample and fresh weight of plant per plot. The results showed that both varieties were significantly different in the parameters of plant height, greenish leaves, the number of leaves, and the fresh weight of the plant per sample. Application of nitrogen source showed differences in plant height at 10 weeks after move planting and fresh weight of plant per sample.

scholarly journals PENGARUH MEDIA TANAM DAN KONSENTRASI PUPUK ORGANIK CAIR TERHADAP PERTUMBUHAN DAN PRODUKSI TANAMAN SELADA MERAH (Lactuca sativa L.)

2017 ◽  
Vol 13 (1) ◽  
pp. 53
Author(s):  
Karim Lamawulo ◽  
Herman Rehatta ◽  
Jane I Nendissa
Keyword(s):  
Block Design ◽  
Organic Fertilizer ◽  
Root Weight ◽  
Treatment Level ◽  
Lactuca Sativa L ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
Main Components ◽  
G Ratio ◽  
Fresh Root

Planting media and concentration of liquid organic fertilizer were the main components that play a role as a medium to grow plants and nutrients supply for the red lettuce. To obtain appropriate planting medium and concentration of liquid organic fertilizer for growth and production of red lettuce plant, an experiment was conducted using Randomized Block Design Factorial, i.e Liquid Organic Fertilizer concentration with 6 treatment level, K0 (Without Treatment), K1 (POC 5 cc/L) (POC 20 cc/L), K4 (POC 20 cc/L) and K5 (POC 25 cc/L) and Planting Media with 3 levels i.e, M1 (3:1), M2 (4:1) and M3 (5:1). The concentration of liquid organic fertilizer gave very significant effects to the height parameters of plant (cm), number of leaves (leaf), leaf area (cm2), fresh weight of crown (g) and fresh root weight (g). Planting media had very significant effects on fresh root weight (g), ratio of root and canopy (%) and harvest index (%).

scholarly journals PENGARUH POPULASI DAN PEMBERIAN PUPUK BIO SLURRY KOTORAN SAPI PADA PERTUMBUHAN DAN HASIL TANAMAN OKRA (Abelmoschus Esculentu L. Moench)

2019 ◽  
Vol 13 (1) ◽  
pp. 45-56
Author(s):  
Adi Taufiq Nurrohman
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Organic Fertilizer ◽  
Stem Diameter ◽  
Organic Fertilizers ◽  
Quality Data ◽  
Plant Spacing ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Number Of Leaves

This study aims to 1) To determine the interaction of organic fertilizers and plant spacing on the growth and production of okra plants. 2) To determine the best dose of organic fertilizer on the growth and production of okra plants. 3) To determine the appropriate planting spacing for the growth and production of okra plants. This research was conducted using factorial randomized block design (RBD) with 2 factors, the first factor was plant spacing (A) consisting of 3 levels, namely: 60x40 cm (A1), 60x50 cm (A2), 60x60 cm (A3) . The second factor was the dose of organic fertilizer (J) which consists of 3 levels, namely 5 tons / ha-1 (J1), 10 tons ha-1 (J2), 15 kg ha-1 (J3). The variables observed included plant height, stem diameter, number of leaves, total pods, total pod weight and pod quality. Data were analyzed using analysis of variance (ANOVA) level of 5% and further testing with Duncan's Multiple Range Test (DMRT). The results showed that: There was no significant interaction between organic fertilizer dosage and plant spacing on the growth and production of okra plants. Dosage treatment of organic fertilizer Bio slurry 15 Ton ha-1 (A3) significantly affected plant height, stem diameter, the highest plant height of 55.6411, 72.5322 and 77.0889 at the age of 6.7 and 8 MST. The highest stem diameter is 0.8689, 1.7844, 2.1289, 2, 0789 at the age of 3,6,7 and 8 MST. the best number of leaves is 27,706 age 8 MST. The treatment of plant spacing of 60x40 cm (A1) had a significant effect on the total number of pods and total pod weight, the total number of pods was 23.8569 and the total pod weight was 275.85 g in all harvests

Sign in / Sign up

Export Citation Format

Share Document