scholarly journals PENGARUH PEMBERIAN BORON DAN WAKTU PEMANENAN POLEN TERHADAP PENINGKATAN PRODUKSI DAN VIABILITAS POLEN TETUA JANTAN SEMANGKA (Citrullus lanatus Thunberg.)

2019 ◽  
Vol 1 (2) ◽  
pp. 203-212
Author(s):  
Aris Susanto ◽  
Sri Hartatik ◽  
Muh. Burhan Rosyidi
Keyword(s):  
Seed Production ◽  
Fruit Set ◽  
Citrullus Lanatus ◽  
Research Result ◽  
Male Flower ◽  
Random Group ◽  
High Viability ◽  
Hybrid Seeds ◽  
Male Flowers ◽  
Factorial Design Of Experiments

Pollen management is one of the important factors in the production of hybrid seeds. The main obstacle in the seed production of hybrid watermelon are the appearance of the flowers do not coincide, and limited the availability of pollen with high viability. This research aims to the of dosage of boron and pollen harvesting time the pollen production and viability of pollen watermelon male parent. The research was done on a farm Seed Production Research Land of PT. Benih Citra Asia, sub-district Ajung, districts Jember and done with a random group of factorial design of experiments, with the first factor: 4 level doses of boron, and the second factor: 3 time harvesting the pollen, with each combination treatment is repeated as many as three times. The research result of which demonstrate of application of boron 1,0 kg ha-1 and time of harvesting the pollen pre-anthesis produces the successs of pollination to 100%. The boron dosage 1 kg ha-1 is able to give the age of male flowers faster which is 25,89 DAP, and the age of female flowers is faster which is 31,67 DAP, and produces a higher fruit set that is 94,44%. The time for harvesting pollen in anthesis phase produces the highest pollen germination, which 63,81%.Keywords: male flower, media Brewbaker and Kwack, germination pollen, fruit set

scholarly journals Environmental and physiological effects on cross-ability and seed production of greenhouse cucumber

2019 ◽  
Vol 41 (2) ◽  
pp. 134-143
Author(s):  
Maryam Golabadi ◽  
Sezai Ercisli ◽  
Forough Ahmadi
Keyword(s):  
Seed Production ◽  
Block Design ◽  
Young Male ◽  
Male Flower ◽  
Early Morning ◽  
Randomized Complete Block Design ◽  
Flower Age ◽  
Greenhouse Cucumber ◽  
Male Flowers ◽  
Empty Seeds

Abstract: Seed production depends on many factors. In this study, two independent experiments were carried out to investigate the effects of pollination time, crossed node spacing, male flower age, number of crossings on each plant and deletion/non-deletion of other fruits in the crossed nodes on the cross-ability and seed production in greenhouse cucumber. In every experiment, three mentioned factors were assayed based on factorial experiment as a randomized complete block design. Crosses were done on 10 plants in every replication of treatments. The results showed that pollination at 8:00‒9:45 AM, led to higher amount of full seed weight in contrast to other times of pollination. Increasing crossed node spacing from 2‒3 to 4‒5 nodes led to an increase in the number of empty seeds, which was ascribed to the reduced seed production. The highest amount of number of seeds per fruit, seed weigh and number of full seeds were obtained when young male flowers were used. Moreover, higher seed production was obtained from five, instead three crossings on each plant, and the non-deletion of fruits on the crossed nodes. Overall, higher percentage of seed production per fruit was obtained when crossing was done with young male flower in early morning and high number of crossing in every plant.

scholarly journals Influence of Honey Bee Pollination on Triploid Watermelon Fruit Set and Quality

HortScience ◽  
2005 ◽  
Vol 40 (4) ◽  
pp. 1118C-1118
Author(s):  
S. Alan Walters
Keyword(s):  
Honey Bee ◽  
Fruit Set ◽  
Citrullus Lanatus ◽  
Hollow Heart ◽  
Pistillate Flower ◽  
Soluble Solids ◽  
Vegetable Crops ◽  
Bee Pollination ◽  
Male Flowers ◽  
Triploid Watermelon

Cucurbit vegetable crops, such as watermelon (Citrullus lanatus), require insect pollination for fruit set, which is usually achieved by placing honey bee (Apismellifera) colonies in a field or relying upon natural bee populations. Pistillate (or female) watermelon flowers require multiple honey bee (or other bee) visitations after visiting staminate (or male) flowers for fruit set, and pollination is even more of a concern in triploid watermelon production since staminate flowers contain mostly nonviable pollen. Six honey bee visitation treatments, 1) no visitation control, 2) two visits, 3) four visits, 4) eight visits, 5) 16 visits, and 6) open-pollinated control, were evaluated to determine the effect of honey bee pollination on `Millionaire' triploid watermelon fruit set, yield, and quality utilizing `Crimson Sweet' at a 33% pollinizer frequency. No differences (P> 0.05) between honey bee pollination treatments were observed for `Millionaire' quality characters (hollow heart disorder or percent soluble solids). The lowest pistillate flower abortion rate (20%) and subsequently the greatest triploid watermelon yields (fruit numbers and weights per hectare) occurred with the openpollinated control compared to all other honey bee visitation treatments. Fruit abortion rates decreased linearly, while fruit numbers and weights per hectare increased linearly as number of honey bee visits to pistillate flowers increased from 0 (no visit control) to the open-pollinated control (≈24 visits). This study indicated that >16 honey bee visits are required to achieve maximum triploid watermelon fruit set and yields, which is twice the number of honey bee visits required by diploid watermelons to achieve similar results.

scholarly journals Flower Development and Its Implication for Seed Production on Amorphophallus muelleri Blume (Araceae)

2016 ◽  
Vol 7 (2) ◽  
pp. 65 ◽  
Author(s):  
Edi Santosa ◽  
Adolf Pieter Lontoh ◽  
Ani Kurniawati ◽  
Maryarti Sari ◽  
Nobuo Sugiyama
Keyword(s):  
Seed Production ◽  
Morphological Characteristics ◽  
Male Flower ◽  
Female Flower ◽  
Flowering Phenology ◽  
Flower Morphology ◽  
Bud Break ◽  
Male Flowers ◽  
Positive Correlations ◽  
Artificial Shading

<p><em>ABSTRACT</em></p><p><em>There are many studies on agronomic and economic advantages of iles-iles (<span style="text-decoration: underline;">Amorphophallus</span> <span style="text-decoration: underline;">muelleri</span> Blume), leading to high demand on seed to support the rapid production expansion in many Asian countries. By contrast, there are few studies on flowering phenology and flower morphology although they affect the seed production. Therefore, we evaluated flowering phenology and flower morphology of 80 plants of <span style="text-decoration: underline;">A.</span> <span style="text-decoration: underline;">muelleri</span> grown in a field under 65% artificial shading net </em><em>at Leuwikopo Experimental Farm IPB Darmaga, Bogor</em><em>,</em><em> Indonesia </em><em>from May 2015 to July 2016 in order to improve seed production. <span style="text-decoration: underline;">A.</span> <span style="text-decoration: underline;">muelleri</span> produced solitary spadix, with female flowers at the lower part and male flowers at the upper part. Spadix grew slowly for 56-71 days after bud break, and then grew rapidly thereafter for 30-35 days until anthesis. Seed was harvested 9.6 to 10.2 months after anthesis. We devided the development of spadix into seven phases, bud break as stage I and berry maturity as stage VII. Stage VI to VII determined seed production. Seed production was also affected by roots<del cite="mailto:Windows%207" datetime="2016-10-31T14:49"></del> formation and spadix size. There were strong positive correlations between lengths <del cite="mailto:Windows%207" datetime="2016-10-31T14:50"></del>of the female zones with berry production. Some morphological characteristics of spadix were dependent on corm size, thus, it was <del cite="mailto:Windows%207" datetime="2016-10-31T14:50"></del><ins cite="mailto:Windows%207" datetime="2016-10-31T14:50"></ins>likely that agronomic improvement to enhance </em><em>female </em><em>flower and corm sizes was<ins cite="mailto:Windows%207" datetime="2016-10-31T14:50"></ins>important in seed production.</em></p><p align="left"><em>Keywords: developmental s<del cite="mailto:Windows%207" datetime="2016-10-25T11:44"></del><ins cite="mailto:Windows%207" datetime="2016-10-25T11:44"></ins>tage, female flower, iles-iles, male flower, seed production</em><em></em></p><p> </p><p>ABSTRAK</p><p>Telah banyak kajian keunggulan agronomi dan ekonomi iles-iles (<em>Amorphophallus muelleri</em> Blume), sehingga mendorong peningkatan permintaan benih untuk mendukung perluasan areal produksi di banyak negara Asia. Namun demikian, kajian fenologi dan morfologi bunga khususnya terkait produksi benih masih terbatas. Oleh karena itu, kami mengkaji perkembangan dan morfologi 80 bunga iles-iles yang ditanam di bawah paranet 65% di Kebun Percobaan <ins cite="mailto:Windows%207" datetime="2016-10-31T14:50"></ins><ins cite="mailto:Windows%207" datetime="2016-10-31T14:50"></ins>Leuwikopo IPB, Bogor, Indonesia dari Mei 2015 sampai Juli 2016 dalam rangka perbaikan produksi benih. Iles-iles menghasilkan sebuah tongkol bunga dengan bunga betina pada bagian bawah dan bunga jantan pada bagian atas. Tongkol bunga tumbuh lambat 58-71 hari setelah pecah tunas, diikuti tumbuh cepat 30-35 hari hingga antesis, dan biji dipanen 9.6 sampai 10.2 bulan setelahnya. Perkembangan bunga dari pecah tunas hingga buah matang dapat dibagi menjadi tujuh tahap. Tahap VI ke tahap VII menentukan keberhasilan produksi biji iles-iles. Selain itu, keberhasilan produksi biji juga dipengaruhi oleh keberadaan akar dan ukuran tongkol khususnya panjang bagian bunga betina. Beberapa karakter morfologi bunga iles-iles<em> </em>dipengaruhi oleh ukuran umbi saat tanam. Oleh karena itu, perlu perbaikan agronomis untuk meningkatkan ukuran umbi dan ukuran bunga betina guna mendukung produksi benih.</p><p>Kata kunci: bunga <del cite="mailto:Windows%207" datetime="2016-10-25T11:44"></del><ins cite="mailto:Windows%207" datetime="2016-10-25T11:44"></ins>betina, bunga jantan, iles-iles, produksi benih, tahap pertumbuhan</p>

scholarly journals Honey Bee Pollination Requirements for Triploid Watermelon

HortScience ◽  
2005 ◽  
Vol 40 (5) ◽  
pp. 1268-1270 ◽  
Author(s):  
S. Alan Walters
Keyword(s):  
Honey Bee ◽  
Honey Bees ◽  
Fruit Set ◽  
Citrullus Lanatus ◽  
Hollow Heart ◽  
Subsequent Development ◽  
Soluble Solids ◽  
Bee Pollination ◽  
Male Flowers ◽  
Triploid Watermelon

Honey bees (Apis mellifera L.) are important pollinators of triploid watermelon [Citrullus lanatus (Thunb.) Matsum & Nakai]. Pistillate (or female) watermelon flowers require multiple honey bee or other wild bee visitations after visiting staminate (or male) flowers for fruit set, and pollination is even more of a concern in triploid watermelon production since staminate flowers contain mostly nonviable pollen. Six honey bee visitation treatments—1) no visitation control, 2) two visits, 3) four visits, 4) eight visits, 5) 16 visits, and 6) open-pollinated control—were evaluated to determine the effectiveness of honey bee pollination on `Millionaire' triploid watermelon fruit set, yield, and quality utilizing `Crimson Sweet' at a 33% pollenizer frequency. `Millionaire' quality characters (hollow heart disorder or percent soluble solids) did not differ (P > 0.05) between honey bee pollination treatments. The open-pollinated control provided the highest fruit set rate (80%) and the greatest triploid watermelon numbers and weights per plot compared to all other honey bee visitation treatments. Fruit set, and fruit numbers and weights per plot increased linearly as number of honey bee visits to pistillate flowers increased from 0 (no visit control) to the open-pollinated control (about 24 visits). This study indicated that between 16 and 24 honey bee visits are required to achieve maximum triploid watermelon fruit set and yields at a 33% pollenizer frequency, which is twice the number of honey bee visits required by seeded watermelons to achieve similar results. This is probably due to many honey bees visiting staminate triploid watermelon flowers (that are in close proximity) before visiting pistillate flowers thus providing mostly nonviable pollen that is useless for fruit set and development. Therefore, more honey bee visits to pistillate triploid watermelon flowers would be required to achieve maximum fruit set and subsequent development compared to seeded watermelons.

The effects of date pollinizer variety and pollination time on fruit set and yield of Medjhol date palm

2014 ◽  
Vol 2 (2) ◽  
pp. 67-71 ◽  
Author(s):  
Abdoul Amir Rahnama ◽  
Esmaeil Rahkhodaei
Keyword(s):  
Date Palm ◽  
Fruit Set ◽  
Block Design ◽  
Male Flower ◽  
Fruit Weight ◽  
Palm Fruit ◽  
Tropical Fruit ◽  
Male And Female ◽  
Time Interaction ◽  
Female Flowers

Date palm is unisexual, being either male or female. Male and female flowers grow on buds called Spathe, which opens naturally when fully mature. It is easy to identify the male and female flowers. Under the method of manual pollination, pollen from a male flower is smeared over female flowers. The pollen variety and pollination time have important effects on date palm fruit set, yield and quality. This experiment was carried out to study the effect of date pollinizer variety and pollination time on fruit set, growth and development of Medjhol date palm variety, in date palm garden of date palm and tropical fruit research institute of Iran during three years from 2009 to 2011. The trail was randomized complete block design in factorial manner with three pollen variety as Ghaname, Vardy, and Samesmave, two pollination time as 1-3 days before or after spathe opening and four replication. The results showed that the Vardy pollen had significant effects and increased the fertility percent and fruit yield, rather than two other pollen varieties. The pollen variety had no significant effects on fruit quality as total sugar, acidity, and bricx. The pollination time before spathe opening significantly increased fertility percent, decreased fruit weight and date palm yield. Finally the pollen variety and pollination time interaction effects showed that, application of Vardy pollen from 1-3 days after spathe opening with the most production date palm yield, equal 19.9 kilogram per any date palm trees, so this treatment is the best and are recommended.

Differential nectar production between male and female flowers in a wild cucurbit: Cucurbita maxima ssp. andreana (Cucurbitaceae)

2002 ◽  
Vol 80 (11) ◽  
pp. 1203-1208 ◽  
Author(s):  
Lorena Ashworth ◽  
Leonardo Galetto
Keyword(s):  
Reproductive Output ◽  
Male Flower ◽  
Female Flower ◽  
Cucurbita Maxima ◽  
Nectar Production ◽  
Male And Female ◽  
Nectar Sugar Composition ◽  
Nectar Sugar ◽  
Male Flowers ◽  
Female Flowers

In dioecious and monoecious plants that depend on animal vectors for reproduction, pollinators have to be attracted to male and female flowers for pollination to be effective. In the monoecious Cucurbita maxima ssp. andreana, male flowers are produced in greater quantity, are spatially more exposed to pollinators and offer pollen in addition to nectar as floral rewards. Nectar traits were compared between male and female flowers to determine any differences in the characteristics of the main reward offered to pollinators. Nectar chemical composition and sugar proportions were similar between flower types. Total nectar sugar production per female flower was threefold higher than per male flower, and nectar removal did not have any effect on total nectar production in both flower morphs. Pollinators reduced nectar standing crops to similar and very scarce amounts in both flower types. Results indicate indirectly that pollinators are consuming more nectar from female flowers, suggesting that the higher nectar production in female flowers may be a reward-based strategy to achieve the high female reproductive output observed in this species.Key words: Cucurbitaceae, Cucurbita maxima ssp. andreana, nectar production, nectar sugar composition, removal effects, standing crop.

scholarly journals The Effects of Silver Nitrate Applications on the Flower Quantity of Cucumbers (Cucumis sativus L.)

2011 ◽  
Vol 39 (1) ◽  
pp. 139 ◽  
Author(s):  
Deniz KARAKAYA ◽  
Hüseyin PADEM
Keyword(s):  
Silver Nitrate ◽  
Cucumis Sativus ◽  
Male Flower ◽  
Flower Formation ◽  
Cucumis Sativus L ◽  
Male Flowers ◽  
Female Flowers

This study was conducted to investigate the effects of silver nitrate (AgNO3) on the flower quantity of cucumbers. The seeds used in this study, which was carried out in a plastic greenhouse, in the Gazi village of Antalya Province (Turkey) the during spring and autumn 2005 breeding periods, were ‘Mostar F1’ (designated as ‘GND1’) and ‘Vesco Seeds Beith Alpha F1 (26.50 F1)’, designated as ‘GND2’ and those are the types having common production. The silver nitrate application was performed by the method of spraying on the growth tips of plants and 0, 250, 500, 750, and 1000 ppm silver nitrate doses were administered. The research was conducted with 4 repetitions having 5 plants in each repetition according to the Random Parcel Trial Pattern. In order to determine the effects of the applications, the effects of a number of female flowers and male flowers on generative characteristics of planting periods (spring and fall) were identified and the results were statistically evaluated. According to the results obtained in this research, AgNO3 has led to the formation of male flowers (no male flower formation in control), has increased the number of male flowers, and has led to a decrease in the number of female flowers. The increase in the number of male flowers varied according to the periods (in ‘GND2’).

scholarly journals Assessment of weather effect on flower morphogenesis and fruit set in mango varieties in central India

2022 ◽  
Vol 24 (1) ◽  
Author(s):  
N. R. RANGARE ◽  
MANISH BHAN ◽  
S. K. PANDEY
Keyword(s):  
Sex Ratio ◽  
Minimum Temperature ◽  
Fruit Set ◽  
Male Flower ◽  
Central India ◽  
Flower Initiation ◽  
Hermaphrodite Flower ◽  
Flower Morphogenesis ◽  
Bud Initiation ◽  
Flower Sex Ratio

A two-year field experiment was initiated in 2017-18 and 2018-19 years simultaneously to assess temperature on flower morphogenesis stages, flower sex ratio (hermaphrodite/staminate male flower) and fruit set in monoembryonic Langra and Amrapali varieties. Different dates of flower phenological stages viz., bud, panicle, bloom and flower initiation, pea, marble, egg, and maturity of fruits were recorded. The Langra variety exhibited bud initiation after mid December whereas Amrapali variety by the end of December. The range of mean maximum / minimum temperature as 26-31/10-12 °C promoted hermaphrodite flowers per panicle by 74 per cent in Langra variety, whereas range of 27-29/11-13 °C favored by 35 per cent in Amrapali variety. A positive and significant correlation between total number of flower / panicle and flower sex ratio in both the varieties suggested that higher temperature during initial flower phenologies improved number of hermaphrodite flowers. A mean minimum temperature for producing more number of hermaphrodite flower  exhibited a range of 11-14 °C under central Indian conditions.  Fruit set was maximum during pea stage and decline afterwards in marble and fruit maturity stages due to sudden rise in temperature at marble stage that caused in drop down of humidity thereby resulted in fruit drop in both the varieties.

scholarly journals Cryogenic Storage of Tomato Pollen: Effect on Fecundity

HortScience ◽  
1996 ◽  
Vol 31 (3) ◽  
pp. 447-448 ◽  
Author(s):  
Erik J. Sacks ◽  
Dina A. St. Clair
Keyword(s):  
Lycopersicon Esculentum ◽  
Seed Production ◽  
Fruit Set ◽  
Viable Seed ◽  
Pollen Storage ◽  
Germplasm Storage ◽  
Cryogenic Storage ◽  
Fresh Pollen ◽  
Tomato Breeding ◽  
Pollen Effect

The influence of cryogenic pollen storage on fruit set and seed production in tomato (Lycopersicon esculentum Mill.) was investigated. Flowers pollinated with pollen samples stored for 5 weeks at –80C, with or without 20 h precooling at 4C, had similar fruit set and number of viable seed per fruit as those pollinated with fresh pollen. Pollen samples, which were repeatedly cooled (–80C) and warmed (to 22 to 24C) for up to six cycles, continuously maintained the same viability as the fresh pollen. When cryogenically stored pollen of L. esculentum 2-837, LA359, LA3198, and LA3199 were used to pollinate LA359, the number of viable seed formed per fruit differed significantly. Results of this study suggest that pollen cryopreservation can be used successfully for tomato breeding and germplasm storage.

scholarly journals Growth Analysis of Watermelon Plants Grown with Mulches and Rowcovers

1995 ◽  
Vol 120 (6) ◽  
pp. 1001-1009 ◽  
Author(s):  
Nader Soltani ◽  
J. LaMar Anderson ◽  
Alvin R. Hamson
Keyword(s):  
Growth Rate ◽  
Leaf Area ◽  
Growth Analysis ◽  
Citrullus Lanatus ◽  
Total Yield ◽  
Carbon Dioxide Concentration ◽  
Male Flower ◽  
Female Flower ◽  
Plastic Mulch ◽  
Area Index

`Crimson Sweet' watermelon [Citrullus lanatus (Thunb.) Matsum. & Nakai] plants were grown with various mulches and rowcovers and analyzed for relative growth rate (RGR), net assimilation rate (NAR), specific leaf area (SLA), leaf area index (LAI), and crop growth rate (CGR). Spunbonded polyester fabric (SB-PF) and perforated polyethylene film (PCP) rowcovers generally showed greater mean RGR, SLA and CGR than spunbonded polypropylene polyamide net (SB-PP), black plus clear combination plastic mulch and black plastic mulch alone. Plants on mulches and under rowcovers showed significant increases in RGR, NAR, and SLA over plants grown in bare soil. Carbon dioxide concentration inside the transplanting mulch holes was nearly twice the ambient CO, concentration. Growth analysis of sampled watermelon plants during early stages of development under various treatments was predictive of crop yield. Plants under SB-PF and PCP rowcovers produced the earliest fruit and the greatest total yield. An asymmetrical curvilinear model for watermelon growth and development based on cardinal temperatures was developed. The model uses hourly averaged temperatures to predict growth and phenological development of `Crimson Sweet' watermelon plants grown with and without rowcovers. Early vegetative growth correlated well with accumulated heat units. Results indicate a consistent heat unit requirement for the `Crimson Sweet' watermelon plants to reach first male flower, first female flower and first harvest in uncovered plants and plants under rowcovers. Greater variability was observed in predicting date of first harvest than first bloom.

Sign in / Sign up

Export Citation Format

Share Document