CONTINUOUS-CAST 45-12 DUCTILE IRON

Alloy Digest ◽  
1989 ◽  
Vol 38 (4) ◽  
Keyword(s):  
Continuous Casting ◽  
Ductile Iron ◽  
Heat Treating ◽  
Grain Structure ◽  
Continuous Cast ◽  
Good Surface ◽  
Fine Grain ◽  
High Speeds ◽  
Good Surface Finish ◽  
Iron Grade

Abstract Ductile Iron grade 45-12 produced by continuous casting has consistent density and fine grain structure. It is the softest of the regular grades of ductile iron and it machines at high speeds with good surface finish. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: CI-58. Producer or source: Federal Bronze Products Inc..

DURA-BAR 80-55-06

Alloy Digest ◽  
2020 ◽  
Vol 69 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Surface Finish ◽  
Ductile Iron ◽  
Heat Treating ◽  
Continuous Cast ◽  
Cast Products

Abstract Dura-Bar 80-55-06 is a ferritic-pearlitic ductile iron that is used for continuous cast products. It offers higher strength and wear resistance when compared to Dura-Bar 65-45-12, while still possessing good machinability and surface finish. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on heat treating and machining. Filing Code: CI-71. Producer or source: Charter Dura-Bar, Inc.

DURA-BAR 65-45-12

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ductile Iron ◽  
Heat Treating ◽  
Continuous Cast ◽  
Good Ductility ◽  
Nodular Graphite ◽  
Cast Products

Abstract Dura-Bar 65-45-12 is a ductile iron that is used for continuous cast products. Its microstructure consists of nodular graphite in a matrix of ferrite with small amounts of pearlite. Dura-Bar 65-45-12 is used for moderately stressed parts requiring good ductility and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and shear strength. It also includes information on heat treating and machining. Filing Code: CI-69. Producer or source: Charter Dura-Bar, Inc.

KETOS

Alloy Digest ◽  
1960 ◽  
Vol 9 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Grain Structure ◽  
Steel Company ◽  
Fine Grain ◽  
Crucible Steel

Abstract KETOS is an oil-hardening non-deforming tool steel having deep hardening qualities with a fine grain structure. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as deformation. It also includes information on forming, heat treating, and machining. Filing Code: TS-96. Producer or source: Crucible Steel Company of America.

VERSASTEEL

Alloy Digest ◽  
1967 ◽  
Vol 16 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Heat Treating ◽  
Grain Structure ◽  
High Wear Resistance ◽  
Compressive Yield Strength ◽  
Steel Company ◽  
Fine Grain ◽  
Unusual Combination ◽  
Crucible Steel ◽  
Secondary Hardness

Abstract VERSASTEEL is a tool steel designed to provide an unusual combination of fine grain structure, high secondary hardness, and compressive yield strength together with good toughness and high wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-188. Producer or source: Crucible Steel Company of America.

DYNA-LOY 41L43

Alloy Digest ◽  
1978 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Chemical Composition ◽  
Physical Properties ◽  
Surface Treatment ◽  
Surface Finish ◽  
Heat Treating ◽  
Good Surface ◽  
Wide Range ◽  
Good Surface Finish

Abstract DYNA-LOY 41L43 is a cold-drawn alloy steel developed for those applications that require excellent machinability along with a hardness range of Rockwell C 33 to 55. Its chemical composition permits maximum machinability and good surface finish for the tensile strength range 150,000 to 280,000 psi. It is recommended for a wide range of uses such as gears, bushings and fasteners. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-341. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

DURA-BAR 60-40-18

Alloy Digest ◽  
2021 ◽  
Vol 70 (10) ◽  
Keyword(s):  
Impact Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ductile Iron ◽  
Heat Treating ◽  
Continuous Cast ◽  
Ferritic Matrix ◽  
Nodular Graphite ◽  
Cast Products

Abstract Dura-Bar 60-40-18 is a ductile iron that is used for the production of continuous cast products. Its microstructure consists of nodular graphite in a fully ferritic matrix. Dura-Bar 60-40-18 is typically used for applications requiring excellent ductility and impact strength. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-86. Producer or source: Charter Dura-Bar, Inc.

DURA-BAR 100-70-03

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Ductile Iron ◽  
High Strength ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Continuous Cast ◽  
Hardness Values ◽  
Cast Products

Abstract Dura-Bar 100-70-03 is a pearlitic ductile iron that is used for continuous cast products. It has the best wear resistance of the ascast ductile irons and is used in applications requiring high strength and high wear resistance. This grade is normally used as an alternative to quenched and tempered steels that have hardness values less than 302 HBW. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive strength. It also includes information on heat treating and machining. Filing Code: CI-74. Producer or source: Charter Dura-Bar, Inc.

DOMEX 315 MC

Alloy Digest ◽  
2008 ◽  
Vol 57 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Hsla Steel ◽  
High Strength ◽  
Heat Treating ◽  
Grain Structure ◽  
Bend Strength ◽  
Cold Forming ◽  
Fine Grain ◽  
Thermomechanical Rolling ◽  
Hot Rolled

Abstract Domex 315 MC is a hot-rolled, high-strength low-alloy (HSLA) steel with a fine grain structure produced through thermomechanical rolling. It is used for cold-forming operations. The alloy meets or exceeds the requirements of S315MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-581. Producer or source: SSAB Swedish Steel Inc.

DURA-BAR 65-45-12X

Alloy Digest ◽  
2021 ◽  
Vol 70 (12) ◽  
Keyword(s):  
Fatigue Strength ◽  
Ductile Iron ◽  
Heat Treating ◽  
Continuous Cast ◽  
Suitable Alternative ◽  
Medium Carbon ◽  
Alloy Steels ◽  
Nodular Graphite ◽  
Strength And Ductility ◽  
Cast Products

Abstract Dura-Bar 65-45-12X is a ductile iron that is used for the production of continuous cast products. Its microstructure consists of nodular graphite and a matrix comprising ferrite and 10–50% pearlite. The predominantly ferritic matrix of Dura-Bar 65-45-12X allows it to be easily machined as opposed to steels and pearlitic irons. Dura-Bar 65-45-12X is a suitable alternative to low and medium carbon non-alloy steels. It is appropriate for applications necessitating fatigue strength and ductility. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-88. Producer or source: Charter Dura-Bar, Inc.

CONTINUOUS-CAST GRAY IRONS

Alloy Digest ◽  
1989 ◽  
Vol 38 (2) ◽  
Keyword(s):  
Compressive Strength ◽  
Continuous Casting ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Gray Iron ◽  
Continuous Cast ◽  
Conventionally Cast

Abstract Types G-1 and G-2 gray iron bar and plate produced by continuous casting have consistent density and hardness with improved toughness, providing greater durability and more dependable performance than conventionally cast grades. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on heat treating and machining. Filing Code: CI-57. Producer or source: Federal Bronze Products Inc..

Sign in / Sign up

Export Citation Format

Share Document