STELLITE 700 SERIES

Alloy Digest ◽  
1996 ◽  
Vol 45 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Tensile Properties ◽  
Corrosion And Wear ◽  
Wear Resistant

Abstract The Stellite 700 series are wear-resistant alloys in which molybdenum replaces the tungsten used in traditional Stellite alloys. Both corrosion and wear resistance result. This datasheet provides information on composition, hardness, tensile properties, and compressive strength. It also includes information on corrosion and wear resistance. Filing Code: CO-101. Producer or source: Stoody Deloro Stellite Inc.

TRIBOCOR 532N

Alloy Digest ◽  
1986 ◽  
Vol 35 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Corrosion And Wear ◽  
Refractory Alloy ◽  
Wear Resistant ◽  
Temperature Performance

Abstract TRIBOCOR 532N is a refractory alloy (columbium base) produced by conventional melting, casting and working techniques. In its final form the product made of this alloy is nitrided to develop superior corrosion and wear-resistant characteristics. This datasheet provides information on composition, physical properties, microstructure, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance, corrosion and wear resistance as well as forming. Filing Code: Cb-22. Producer or source: Fansteel Metallurgical Corporation.

ULTEM 4001

Alloy Digest ◽  
1992 ◽  
Vol 41 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Coefficient Of Friction ◽  
Powder Metal ◽  
Wear Resistant

Abstract ULTEM 4001 is an unreinforced polyetherimide resin with an internal lubricant. It is wear resistant and it has a reduced coefficient of friction. See also ULTEM 4000 (Alloy Digest CP-21, March 1992) for reinforced resin properties. ULTEM 4001 is available in opaque colors only. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as casting and powder metal forms. Filing Code: P-33. Producer or source: G. E. Plastics.

WEARITE 4-13

Alloy Digest ◽  
1965 ◽  
Vol 14 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Sliding Contact ◽  
Aluminum Bronze ◽  
Wear Resistant

Abstract Wearite 4-13 is a corrosion and wear resistant extruded aluminum bronze preheat treated to high strength and hardness levels. It is recommended for sliding contact applications where wear resistance and non-galling characteristics are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-156. Producer or source: Mueller Brass Company.

COLMONOY No. 83 PTA

Alloy Digest ◽  
1995 ◽  
Vol 44 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Tungsten Carbide ◽  
Tensile Properties ◽  
Powder Metal ◽  
Application Method ◽  
Plasma Transferred Arc ◽  
Transferred Arc ◽  
Nickel Base

Abstract COLMONOY No. 83 PTA is a nickel-base hard surfacing alloy containing tungsten carbide. The application method is plasma transferred arc and the application is designed to protect extrusion screws. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and compressive strength. It also includes information on wear resistance as well as machining and powder metal forms. Filing Code: Ni-493. Producer or source: Wall Colmonoy Corporation.

DELTALLOY 4032

Alloy Digest ◽  
1998 ◽  
Vol 47 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Coefficient Of Thermal Expansion ◽  
Single Point ◽  
High Strength ◽  
Corrosion And Wear

Abstract Deltalloy 4032 has good machinability and drilling characteristics when using single-point or multispindle screw machines and an excellent surface finish using polycrystalline or carbide tooling. The alloy demonstrates superior wear resistance and may eliminate the need for hard coat anodizing. Deltalloy 4032 is characterized by high strength and a low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion and wear resistance as well as machining and surface treatment. Filing Code: AL-347. Producer or source: ALCOA Wire, Rod & Bar Division.

ABK METAL

Alloy Digest ◽  
1953 ◽  
Vol 2 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Brake Shoe ◽  
Nickel Chromium ◽  
Chromium Cast Iron

Abstract ABK Metal is a nickel-chromium cast iron with excellent wear resistance, recommended for severe abrasive service. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on wear resistance as well as casting, heat treating, machining, and joining. Filing Code: CI-4. Producer or source: American Brake Shoe Company.

OLIN C197

Alloy Digest ◽  
1999 ◽  
Vol 48 (1) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
Corrosion And Wear ◽  
Contact Forces ◽  
High Current ◽  
Lower Strength ◽  
Current Carrying Capability

Abstract Olin C197 is a second-generation high performance alloy developed by Olin Brass. It has a strength and bend formability similar to C194 (see Alloy Digest Cu-360, September 1978), but with 25% higher electrical and thermal conductivity. High conductivity allows C197 to replace brasses and bronzes in applications where high current-carrying capability is required. Also, the strength of C197 provides higher contact forces when substituted for many lower strength coppers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming and joining. Filing Code: CU-627. Producer or source: Olin Brass.

AMPCOLOY 405

Alloy Digest ◽  
1962 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Wear Resistant

Abstract Ampcoloy 405 is a high strength, ductile, corrosion and wear resistant copper alloy available in extruded solid bar form for gears, valve seats, marine hardware, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-116. Producer or source: Ampco Metal Inc..

SWEBOR 400

Alloy Digest ◽  
2014 ◽  
Vol 63 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Tensile Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Bend Strength ◽  
Great Strength ◽  
Wear Resistant

Abstract Swebor 400 (hardness 400 HBW) is a high-strength steel with good wear resistant qualities. This alloy is used to endure conditions of extra-heavy wear and when great strength and good weldability is required. This datasheet provides information on composition, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: CS-181. Producer or source: Swebor Stål Svenska AB.

WAUKESHA ALLOY 23

Alloy Digest ◽  
1993 ◽  
Vol 42 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Resistance ◽  
Corrosion And Wear ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract WAUKESHA METAL NO. 23 is a nickel-base casting alloy having high resistance to corrosion, good machinability, and freedom from any tendency to seize or gall. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance, corrosion and wear resistance as well as machining and joining. Filing Code: Ni-49. Producer or source: Waukesha Foundry Company. Originally published January 1959, revised March 1993.

Sign in / Sign up

Export Citation Format

Share Document