Wear of Functionally Graded Coatings under Frictional Heating Conditions

Multilayered and functionally graded coatings are extensively used for protection against wear of the working surfaces of mechanisms and machines subjected to sliding contact. The paper considers the problem of wear of a strip made of a functionally graded material, taking into account the heating of the sliding contact from friction. Wear is modeled by a moving strip along the surface of a hard abrasive in the form of a half-plane. With the help of the integral Laplace transform with respect to time, the solutions are constructed as convolutions from the law of the introduction of an abrasive into the strip and the original in the form of a contour integral of the inverse Laplace transform. The study of the integrands of contour quadratures in the complex plane allowed determination of the regions of stable solutions to the problem. Unstable solutions of the problem lead to the concept of thermoelastic instability of the contact with friction and formed regions of unstable solutions. The solutions obtained made it possible to determine a formula for the coefficient of functionally graded inhomogeneity of the coating material and to study its effect on the occurrence of thermoelastic instability of the contact taking friction into account, as well as on its main characteristics: temperature, displacement, stress and wear of the functionally graded material of the coating. The effects of the abrasive speed, contact stresses and temperature on wear of the coating with the functionally graded inhomogeneity of the material by the depth were investigated.

Structure and Tribo-Mechanical Properties of MoSx:N:Mo Thin Films Synthesized by Reactive dcMS/HiPIMS

Modifying MoS2 thin films by additional elements shows great potential in order to adjust the property profile and to meet the increasing requirements regarding high wear resistance and low friction properties of industrial components. Within that context, MoSx:N:Mo thin films were deposited by a reactive hybrid dcMS/HiPIMS process. By systematically increasing the Mo target cathode power, an investigation of the structural and the mechanical properties was conducted to understand the evolution of the tribological behavior. A low Mo target cathode power of 1 kW is related to the formation of the preferential (002) MoS2 basal-plane and thus a low friction with µ = 0.2. With an increasing amount of Mo, the film loses its solid lubricant MoS2 properties and a nitride constitution of the thin film is developing due to the formation of crystalline Mo and MoN phases. Related to this transformation, the hardness and elastic modulus are increased, but the adhesion and the tribological properties are impaired. The film loses its plasticity and the generated film material is directly removed from the contact area during the sliding contact.

Ceramic Inlay Bonded Interfaces in Minimally Invasive Preparations: Damage and Contributing Mechanisms in Sliding Contact

SUMMARY Background: In the preparation of inlay cavities, a choice must be made between conventional standard and minimally invasive preparation designs; in the long run, this choice can affect the integrity of the bonded interface. Purpose: To evaluate the effect of minimally invasive cavity preparation designs on the extent and contributing mechanisms of damage to ceramic inlay bonded interfaces. Methods and Materials: Tooth blocks with 90°, 120° and 75° marginal angles were prepared, representing tooth cavities with conventional standard and minimally invasive preparations with large divergence and convergence angles and bonded to monolithic ceramic (IPS e.max CAD). Vickers indentations were placed at various distances from the bonded interface. The indentation morphology and crack length were observed. Reciprocating wear tests were performed on the bonded interface with a 20-newton (N) vertical load. The wear depth and wear-scar morphology were characterized after increments of cyclic sliding contact. Results: The 120° group exhibited longer indentation cracks in the ceramic, whereas the 75° group showed larger indentations in the enamel when compared to the 90° group (p<0.001). Consistent with the weaker edge crack resistance, the 120° group experienced the greatest wear (p=0.008), and the wear depth in the enamel of the 75° group exceeded that of the 90° group (p<0.001) in the early stage (5×102 cycles). However, no significant difference in the wear depth (p>0.147) and morphology were found at the later wear stage among the three groups. Conclusion: Within the limitations of this study, minimally invasive preparations with 120° and 75° marginal angles can result in early sever damage at the ceramic inlay bonded interface but show comparable wear behaviors to the conventional 90° group at the later stage.