ISPAT INLAND MartINsite

Alloy Digest ◽  
2003 ◽  
Vol 52 (2) ◽  
Keyword(s):  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Low Carbon ◽  
High Carbon ◽  
Ultrahigh Strength Steel ◽  
Spring Steels ◽  
Alloy Steels ◽  
Cold Rolled ◽  
Nonferrous Alloys

Abstract Ispat Inland MartINsite is a low-carbon cold-rolled ultrahigh-strength steel available in four grades with minimum tensile strengths of 900 MPa (130 ksi) (M-130), 1100 MPa (160 ksi) (M-160), 1310 MPa (190 ksi) (M-190), and 1520 MPa (220 psi) (M-220). This steel can be used where high strength and/or lightweight are required and can substitute for high-carbon alloy steels, spring steels, and some nonferrous alloys at significant savings in cost. Electrosite is an electrogalvanized form of M-190. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on wear resistance as well as heat treating and surface treatment. Filing Code: CS-62. Producer or source: Ispat Inland Inc. Originally published as Inland MartINsite, October 1976, revised February 2003.

YOUNGSTOWN YS-T50 to YS-T140 STEELS

Alloy Digest ◽  
1977 ◽  
Vol 26 (4) ◽  
Keyword(s):  
Physical Properties ◽  
High Strength Steels ◽  
High Strength ◽  
Heat Treating ◽  
Steel Alloy ◽  
Bend Strength ◽  
Weight Saving ◽  
Cold Rolled ◽  
Hot Rolled ◽  
Minimum Yield

Abstract YS-T 50 to YS-T 140 Steels comprise a series of high-strength, cold-rolled steels designed to meet performance and weight-saving objectives. They are an extension of Youngstown's series of hot-rolled high-strength steels (see Youngstown YS-T Steel, Alloy Digest SA-261, March 1971). The YS-T 50 to YS-T 140 steels have minimum yield strengths ranging from 50,000 psi to 140,000 psi. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on heat treating, machining, and joining. Filing Code: SA-331. Producer or source: Youngstown Sheet and Tube Company.

LO-AIR

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Heavy Duty ◽  
High Carbon

Abstract Lo-Air is a high-carbon alloy steel having air hardening characteristics. It is a deep hardening steel producing a combination of high strength, toughness and wear resistance. It is recommended for precision tools and heavy duty blanking and forming dies. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-154. Producer or source: Cyclops Corporation.

LUCEFIN 25CrMo4 (1.7218), 25CrMoS4 (1.7213)

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Small Section ◽  
Section Size ◽  
Alloy Steels ◽  
Strength And Toughness

Abstract Lucefin 25CrMo4 and 25CrMoS4 are low-carbon, chromium-molybdenum direct hardening alloy steels. These low hardenability steels are used for water-quenched parts of moderate section size and for oil-quenched parts of small section size. In general, these steels are used for parts requiring high strength and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-874. Producer or source: Lucefin S.p.A.

UNS T30106

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. T30106 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-489. Producer or source: Tool steel mills.

AISI TYPE A6

Alloy Digest ◽  
1973 ◽  
Vol 22 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type A6 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-262. Producer or source: Tool steel mills.

BETHSTAR 50

Alloy Digest ◽  
2003 ◽  
Vol 52 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Steel Plate ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Low Carbon ◽  
Low Sulfur ◽  
Minimum Yield

Abstract BethStar 50 steel plate is a high-strength product with a 345 MPa (50 ksi) minimum yield strength. It contains low carbon and low sulfur and has outstanding toughness, weldability, and formability. It provides options for off-highway equipment. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-520. Producer or source: Bethlehem Lukens Plate.

STRIMEK

Alloy Digest ◽  
1984 ◽  
Vol 33 (9) ◽  
Keyword(s):  
Hsla Steel ◽  
Low Carbon Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Low Carbon ◽  
Strip Steel ◽  
Reinforced Plastic ◽  
Low Weight ◽  
Microalloying Elements

Abstract STRIMEK is a Super High-Strength Low-Alloy (HSLA) steel. It is a microalloyed high-strength steel. Its unique properties are obtained in a carefully moniored process where microalloying elements are added and a special type of heat teatment is carried out. Strimek is lighter than an equivalent component of the same strength in low-carbon steel, aluminum or fibreglass-reinforced plastic. It is available in three grades, all of which have the unique combination of high strength, good formability and good weldability. Strimek is recommended where high strength at low weight is needed. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and bend strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-401. Producer or source: Uddeholm Strip Steel AB.

DUCTALLOY

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Ductility ◽  
High Carbon ◽  
Brake Shoe ◽  
Temperature Performance ◽  
Ferrous Material

Abstract DUCTALLOY is a high-carbon ferrous material having high strength, high ductility, toughness and machinability. It is supplied in three grades: pearlitic grade 80, ferritic grade 60, and austenitic grade A50. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: CI-14. Producer or source: American Brake Shoe Company.

DOWMETAL ZK60A

Alloy Digest ◽  
1952 ◽  
Vol 1 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Grain Size ◽  
Corrosion Resistance ◽  
High Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Resistance To Stress ◽  
Extrusion Alloy

Abstract Dowmetal ZK60A is an ageable extrusion alloy for use where high strength magnesium extrusions with good toughness are required. It has small grain size, low notch sensitivity and a relatively high resistance to stress corrosion. This datasheet provides information on composition, physical properties, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-1. Producer or source: The Dow Chemical Company.

ELEKTRON EQ2

Alloy Digest ◽  
2015 ◽  
Vol 64 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Rare Earth ◽  
High Temperature ◽  
Magnesium Alloy ◽  
North America ◽  
Earth Element ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance

Abstract Elektron EQ21 is a casting high strength magnesium alloy developed as a heat treatable alloy with rare earth element additions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-80. Producer or source: Magnesium Elektron Wrought Products, North America.

Sign in / Sign up

Export Citation Format

Share Document