CORRONEL 230

Alloy Digest ◽  
1963 ◽  
Vol 12 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Nitric Acid ◽  
Physical Properties ◽  
High Resistance ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract Corronel 230 is a nickel-chromium alloy having high resistance to corrosion by hot nitric acid and excellent resistance to attack at elevated temperatures from oxidizing and reducing atmospheres high in sulfur. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-86. Producer or source: Henry Wiggin & Company Ltd.

NUCALLOY 45

Alloy Digest ◽  
1977 ◽  
Vol 26 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Commercial Applications

Abstract NUCALLOY 45 is a nickel-chromium-boron alloy which derives superior wear resistance from the presence of hard nickel borides (and to a lesser extent chromium carbides) tightly held in a nickel-rich matrix. It is used in many commercial applications because of its toughness and high resistance to attack by many chemicals. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-238. Producer or source: Stoody Company.

INCONEL ALLOY 671

Alloy Digest ◽  
1972 ◽  
Vol 21 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Chromium Alloy ◽  
Inconel Alloy ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract INCONEL ALLOY 671 is a nickel-chromium alloy having excellent resistance to high-temperature corrosion. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-180. Producer or source: Huntington Alloy Products Division, An INCO Company.

INCONEL 718

Alloy Digest ◽  
1961 ◽  
Vol 10 (4) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Inconel 718 ◽  
Rupture Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract Inconel 718 is an age-hardenable nickel-chromium alloy having exceptionally high tensile, yield, creep, and rupture strength at temperatures up to 1300 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-65. Producer or source: Huntington Alloy Products Division, An INCO Company.

HPM X-750

Alloy Digest ◽  
2006 ◽  
Vol 55 (6) ◽  
Keyword(s):  
Heat Treatment ◽  
High Temperature ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
Alloy Composition ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Wide Range

Abstract HPM X-750 is a precipitation-hardenable nickel-chromium alloy that is well suited for a wide range of corrosive and oxidizing environments where strength must be maintained to elevated temperatures. The alloy composition provides a product that performs well at elevated temperatures up to 700 deg C (1300 deg F). The strength can be increased by heat treatment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: Ni-638. Producer or source: Hamilton Precision Metals.

ALLEGHENY A-286

Alloy Digest ◽  
1966 ◽  
Vol 15 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Iron Nickel

Abstract ALLEGHENY A-286 is an austenitic iron-nickel-chromium alloy designed for service up to 1300 F where high strength and corrosion resistance are required, and for service at higher temperatures where the applications are for lower stresses. It is an age-hardenable alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-4. Producer or source: Allegheny Ludlum Corporation. Originally published December 1952, revised September 1966.

NICROFER 2509 Si 7

Alloy Digest ◽  
1997 ◽  
Vol 46 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Concentrated Sulfuric Acid

Abstract Nicrofer 2509 Si 7 is an austenitic low-carbon nickel-chromium alloy containing 7 wt.% silicon. The alloy was designed for resistance to hot concentrated sulfuric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-673. Producer or source: Krupp VDM Technologies Corporation.

ALLEGHENY LUDLUM AL 800

Alloy Digest ◽  
1998 ◽  
Vol 47 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Iron Chromium Alloy ◽  
Iron Chromium

Abstract AL 800 is a nickel-iron-chromium alloy designed to resist oxidation and carburization at elevated temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-712. Producer or source: Allegheny Ludlum Corporation.

DURALOY HH

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Austenitic Steel ◽  
High Resistance ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
High Nickel

Abstract DURALOY HH is a high nickel-chromium austenitic steel having high resistance to oxidation. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-44. Producer or source: Duraloy Technologies Inc..

CDA 710

Alloy Digest ◽  
1970 ◽  
Vol 19 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
Stress Rupture ◽  
Heat Treating ◽  
Temperature Performance ◽  
Seawater Corrosion ◽  
Stress Rupture Properties ◽  
Rupture Properties

Abstract CDA 710 is a cupro-nickel alloy having high resistance to seawater corrosion and good stress-rupture properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-215. Producer or source: Anaconda American Brass Company.

REVERE No. 430

Alloy Digest ◽  
1958 ◽  
Vol 7 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance

Abstract REVERE No. 430 is an aluminum bronze having high strength, excellent corrosion resistance, and high resistance to sulfuric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-63. Producer or source: Revere Copper and Brass Inc..

Sign in / Sign up

Export Citation Format

Share Document