HAYNES ALLOY No. N-6

Alloy Digest ◽  
1982 ◽  
Vol 31 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Cost Savings ◽  
Heat Treating ◽  
Significant Cost ◽  
Hardfacing Alloy ◽  
Stellite Alloy ◽  
Cabot Corporation ◽  
Nickel Base ◽  
Cobalt Base ◽  
Haynes Alloy

Abstract HAYNES alloy No. N-6 is a nickel-base hardfacing alloy that combines excellent wear resistance with good corrosion resistance and good impact properties. Alloy No. N-6 does this without dependency on cobalt and with significant cost savings over the traditionally used cobalt-base alloys. HAYNES alloy No. N-6 should be evaluated for applications such as fluid valves, corn-cutting knives, glass-shearing blades and automatic applications where STELLITE alloy No. 6 has been used successfully. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-274. Producer or source: Cabot Corporation.

HAYNES ALLOY No. 711

Alloy Digest ◽  
1980 ◽  
Vol 29 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Cost Savings ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Cobalt Alloy ◽  
Cabot Corporation ◽  
Cobalt Base ◽  
Haynes Alloy

Abstract HAYNES alloy No. 711 is a new, multicomponent hard-facing alloy that maximizes wear resistance with a minimum utilization of cobalt. Alloy No. 711 offers cost savings over the traditionally used cobalt-base alloys. It should be evaluated for general maintenance applicants such as a abrasion extruder screws, rock bits and slurry pumps. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-263. Producer or source: Cabot Corporation.

HAYNES STELLITE ALLOY No. 6K

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Base Alloy ◽  
Heat Treating ◽  
Metal Parts ◽  
Stellite Alloy ◽  
Cabot Corporation ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE alloy No. 6K is a cobalt-base alloy with outstanding resistance to most types of wear. Its wear resistance is a built-in characteristic and not the result of heat-treatment, plating, nitriding, or other methods used to produce a superficial hardness on metal parts. Among its many applications are cutting knives and blades for many materials, apple-paring knives in canneries and wear strips in conveyor channels. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-20. Producer or source: Stellite Division, Cabot Corporation. Originally published May 1960, revised July 1978.

HAYNES STELLITE ALLOY No. 6B

Alloy Digest ◽  
1979 ◽  
Vol 28 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Screw Conveyor ◽  
Stellite Alloy ◽  
Cabot Corporation ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE Alloy No. 6B is a cobalt-base alloy that is highly resistant to most types of wear. It has long service life even under constant erosive conditions, and it exhibits high resistance to seizure and galling even without lubricants. Its corrosion resistance is good in a wide variety of media. Its many uses include scrapper blades, screw conveyor flights and sleeves for seawater pump shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance, corrosion and wear resistance as well as heat treating, machining, and joining. Filing Code: Co-23. Producer or source: Stellite Division, Cabot Corporation. “Originally published September 1960, revised July 1979.”

HAYNES ALLOY No. 150

Alloy Digest ◽  
1988 ◽  
Vol 37 (11) ◽  
Keyword(s):  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
High Temperature Alloys ◽  
Cobalt Base Alloy ◽  
Shock Resistance ◽  
Nickel Base ◽  
Cobalt Base ◽  
Haynes Alloy ◽  
Cobalt And Nickel

Abstract HAYNES ALLOY No. 150 is a cobalt-base alloy with excellent thermal shock resistance. It has a higher melting point than other cobalt-and nickel-base high-temperature alloys and resists high-temperature corrosion in air and air-sulfur dioxide atmospheres. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-84. Producer or source: Haynes International Inc..

HAYNES ALLOY No. 273

Alloy Digest ◽  
1974 ◽  
Vol 23 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Composite Electrode ◽  
Hot Forging ◽  
Hot Extrusion ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Cabot Corporation ◽  
Nickel Base ◽  
Haynes Alloy

Abstract HAYNES Alloy No. 273 is a nickel-base, hard-facing alloy developed to provide extra life for hot-working equipment such as hot-forging dies, hot-shear blades and hot-extrusion dies. It is deposited by using a composite electrode with nickel-base core and the balance of the alloying elements in the flux coating. Deposits retain their hardness up to 1200 F. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-208. Producer or source: Cabot Corporation.

HAYNES ALLOY No. 188

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
High Temperature ◽  
Base Alloy ◽  
Aircraft Engine ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Cabot Corporation ◽  
Cobalt Base Alloy ◽  
Engine Components ◽  
Cobalt Base ◽  
Haynes Alloy

Abstract HAYNES Alloy No. 188 is a cobalt-base alloy which has excellent high-temperature strength, outstanding oxidation resistance, and good post-aging ductility. It is recommended for aircraft engine components. (U.S. Pat. 3,418,111 This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Co-62. Producer or source: Stellite Division, Cabot Corporation.

The Electrochemical Behavior of Some Nickel Base and Cobalt Base Alloys

CORROSION ◽  
1968 ◽  
Vol 24 (9) ◽  
pp. 301-311 ◽  
Author(s):  
R. B. LEONARD
Keyword(s):  
Dissolution Rate ◽  
Chromium Alloy ◽  
Acid Media ◽  
Stellite Alloy ◽  
Chromium Alloys ◽  
The Matrix ◽  
Nickel Base ◽  
Hydrochloric Acid Media ◽  
Cobalt Base ◽  
Haynes Alloy

Abstract Potentiostatic anodic polarization curves are provided for Hastelloy Alloys B, C, D, F, and G, Haynes Alloy No. 25 and Haynes Stellite Alloy No. 6B in a variety of media. These data demonstrate that, if oxidizers are present in environments in contact with low chromium alloys, the dissolution rate will increase with increasing oxidizer level. The polarization data also show that copper markedly decreases the dissolution of alloys in reducing media. Also, the presence of grain-boundary precipitates increases the dissolution rate of Hastelloy Alloy C in oxidizing, pitting, and hydrochloric acid media while not affecting the dissolution rate in unaerated sulfuric acid. The effective alloy content of an alloy is altered by the precipitation of new phases, according to the data obtained. A 30% chromium alloy, Haynes Stellite Alloy No. 6B, had higher current densities, hence lower corrosion resistance under oxidizing conditions, than a 20% chromium alloy, Haynes Alloy No. 25. This was causes by the removel of much of the matrix chromium content by the precipitation of chromium containing carbides in the Haynes Stellite Alloy No. 6B.

HAYNES ALLOY No. 214

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Cabot Corporation ◽  
Temperature Performance ◽  
Nickel Base ◽  
Haynes Alloy

Abstract HAYNES ALLOY No. 214 is a nickel-base alloy with excellent oxidation resistance to 2200 F (1205 C), attributable to the tenacious and protective A1203-type film which is modified by a small but effective amount of yttrium. The alloy is also useful in carburizing service and in resisting chlorine contaminated atmospheres. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-336. Producer or source: Cabot Corporation.

HAYNES ALLOY No. 230

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Thermal Stability ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Nickel Base Alloy ◽  
Cabot Corporation ◽  
Temperature Performance ◽  
Nickel Base ◽  
Haynes Alloy

Abstract HAYNES Alloy No. 230 is essentially a cobalt-free, nickel-base alloy with outstanding high-temperature strength, oxidation resistance and thermal stability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: Ni-320. Producer or source: Cabot Corporation.

HAYNES ALLOY No. 36

Alloy Digest ◽  
1959 ◽  
Vol 8 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Jet Engine ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Haynes Alloy

Abstract HAYNES Alloy No. 36 is a cobalt-base alloy having excellent strength at temperatures up to 1800 deg. F. It is the cast modification of wrought HAYNES Alloy No. 25 and has been used successfully in jet engine blading and nozzle vanes. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-17. Producer or source: Haynes Stellite Company.

Sign in / Sign up

Export Citation Format

Share Document