JESSOP JS ALLOY G

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Copper Alloy ◽  
Heat Treating ◽  
Pulp And Paper ◽  
Alkaline Solutions ◽  
Chemical Processing ◽  
Steel Company ◽  
Nickel Chromium

Abstract JESSOP JS Alloy G is a nickel-chromium-iron-molybdenum-copper alloy that exhibits excellent resistance to a wide variety of corrosive conditions. It resists corrosion in both oxidizing and reducing environments, and can handle both acid and alkaline solutions. JS Alloy G resists pitting and stress-corrosion cracking extremely well. Among its many uses are equipment for chemical processing and for pulp and paper manufacture. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-289. Producer or source: Jessop Steel Company.

NICROFER 4221

Alloy Digest ◽  
1983 ◽  
Vol 32 (2) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Pitting Corrosion ◽  
Intergranular Corrosion ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Nickel Chromium

Abstract NICROFER 4221 is a fully austenitic nickel-chromium-iron-molybdenum-copper alloy that is stabilized (against intergranular corrosion) by an addition of titanium. It is resistant to stress-corrosion cracking, pitting corrosion and oxidizing and non-oxidizing hot acids. It has good mechanical properties both at room and at elevated temperatures. It is used in a wide variety of applications up to 540 C (1000 F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-283. Producer or source: Vereingte Deutsche Metallwerke AG.

JS700

Alloy Digest ◽  
1971 ◽  
Vol 20 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Phosphoric Acid ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Steel Company ◽  
Nickel Chromium ◽  
High Nickel

Abstract JS700 is a high nickel-chromium-molybdenum austenitic stainless steel that was developed to combat the extreme corrosive conditions in wet phosphoric acid plants. It also exhibits low susceptibility to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-256. Producer or source: Jessop Steel Company.

JESSOP ALLOY G

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Flue Gases ◽  
Steel Company ◽  
Nickel Chromium

Abstract JESSOP ALLOY G is a nickel-chromium-iron-molybdenum-copper alloy exhibiting excellent resistance to a variety of corrosive conditions. It is resistant to both alkaline and acid environments, to stress-corrosion and to hot flue gases. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-337. Producer or source: Jessop Steel Company.

INCO ALLOY G-3

Alloy Digest ◽  
1986 ◽  
Vol 35 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Heat Affected Zone ◽  
Iron Alloy ◽  
Heat Treating ◽  
Minor Elements ◽  
Nickel Chromium ◽  
Inco Alloy

Abstract INCO Alloy G-3 is a nickel-chromium-iron alloy with additions of molybdenum and copper. Some of the minor elements are controlled to provide increased resistance to weld heat-affected zone corrosion. The alloy has exceptional stress-corrosion cracking resistance in chloride-containing environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-341. Producer or source: lnco Alloys International.

SANDMEYER ALLOY 825

Alloy Digest ◽  
2011 ◽  
Vol 60 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Nickel Alloy ◽  
Stress Corrosion Cracking ◽  
Chloride Ion ◽  
Heat Treating ◽  
Steel Company ◽  
Good Corrosion Resistance

Abstract Sandmeyer alloy 825 is a nickel alloy high in chromium and molybdenum with good corrosion resistance and ductility. The alloy has enough nickel (42%) to be relatively free from chloride-ion stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-687. Producer or source: Sandmeyer Steel Company.

NICROFER 7216 H

Alloy Digest ◽  
1997 ◽  
Vol 46 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Solution Treated ◽  
Resistance To Oxidation ◽  
Resistance To Stress

Abstract Nicrofer 7216 H is a solution-treated nickel-chromium-iron alloy with good resistance to oxidation, carburization, and nitriding; good resistance to stress-corrosion cracking; and good resistance to dry chlorine and hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-520. Producer or source: VDM Technologies Corporation.

NICROFER 7216

Alloy Digest ◽  
1996 ◽  
Vol 45 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Resistance To Oxidation ◽  
Resistance To Stress

Abstract Nicrofer 7216 is a nickel-chromium-iron alloy, with good resistance to oxidation, carburization, and nitriding; good resistance to stress-corrosion cracking; and good resistance to dry chlorine and hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-518. Producer or source: VDM Technologies Corporation.

ALLEGHENY LUDLUM AL600 ALLOY

Alloy Digest ◽  
1989 ◽  
Vol 38 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Nickel Content ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Resistance To Oxidation

Abstract Allegheny Ludlum AL600 alloy is a nickel-chromium alloy designed for use from cryogenic up to 2000 F(1093 C) temperatures. Its nickel content provides resistance to reducing environments and stress-corrosion cracking. Its chromium affords resistance to mildly oxidizing conditions. It has excellent resistance to oxidation to about 2000 F(1093 C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-370. Producer or source: Allegheny Ludlum Corporation.

INCO ALLOY C-276

Alloy Digest ◽  
1985 ◽  
Vol 34 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pollution Control ◽  
Waste Treatment ◽  
Heat Treating ◽  
Pulp And Paper ◽  
Tungsten Alloy ◽  
Chemical Processing ◽  
Inco Alloy

Abstract INCO Alloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with outstanding corrosion resistance that is maintained even in the welded condition. It also has excellent resistance to oxidizing media. It is widely used in the severest environments encountered in chemical processing, pollution control, industrial and municipal waste treatment, pulp and paper production, and other fields. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-311. Producer or source: Huntington Alloys.

HPM 625

Alloy Digest ◽  
2014 ◽  
Vol 63 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
High Strength ◽  
Heat Treating ◽  
Intergranular Attack ◽  
Nickel Chromium ◽  
Strength Alloy ◽  
Corrosion And Oxidation

Abstract HPM 625 is a nickel-chromium-molybdenum high-strength alloy with excellent corrosion and oxidation resistance. It resists stress-corrosion cracking, pitting, and intergranular attack. It is useful to approximately 982 deg C (1800 deg F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-714. Producer or source: Hamilton Precision Metals.

Sign in / Sign up

Export Citation Format

Share Document