ACI TYPE HP

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Sigma Phase ◽  
Heat Treating ◽  
Steel Mill ◽  
Temperature Performance ◽  
Formation Type ◽  
Rupture Properties ◽  
Roll Service ◽  
Iron Chromium

Abstract Type HP is an iron-chromium-nickel alloy with a combination of elements that makes it resistant to both oxidizing and carburizing atmospheres at high temperatures. The alloy has good creep-rupture properties in the 1800-2000 F temperature range. It has an austenitic structure at all temperatures, thus it is not susceptible to embrittlement from sigma phase formation. Type HP was developed for rugged steel-mill furnace-roll service; no comparable wrought alloy exists. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-307. Producer or source: Stainless steel foundries.

ACI TYPE HN

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Steel Casting ◽  
Nickel Content ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Temperature Performance ◽  
Wide Range ◽  
Iron Chromium

Abstract Type HN is an iron-chromium-nickel alloy containing sufficient chromium for good high-temperature corrosion resistance and with nickel content in excess of the chromium. This alloy has properties somewhat similar to the more widely used ACI Type HT alloy but with better ductility. Type HN is used for highly stressed components in the 1800-2000 F temperature range. It is used in the aircraft, automotive, petroleum, petrochemical and power industries for a wide range of components and parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-410. Producer or source: Various stainless steel casting companies.

ACI TYPE HA

Alloy Digest ◽  
1974 ◽  
Vol 23 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Oil Refinery ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Iron Chromium

Abstract Type HA is an air-hardening iron-chromium-molybdenum alloy containing sufficient chromium to provide good resistance to oxidation at temperatures up to about 1200 F. Castings of type HA alloy are used widely in oil refinery service and in the glass industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-301. Producer or source: Stainless steel foundries.

ACI TYPE HF

Alloy Digest ◽  
1963 ◽  
Vol 12 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Resistance ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Iron Chromium

Abstract Type HF is an austenitic iron-chromium-nickel alloy offering high resistance to oxidation at elevated temperatures, high strength and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-143. Producer or source: Stainless steel foundries.

ACI TYPE HI

Alloy Digest ◽  
1959 ◽  
Vol 8 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Temperature Performance ◽  
High Oxidation ◽  
High Oxidation Resistance ◽  
Iron Chromium

Abstract TYPE HI is an iron-chromium-nickel alloy having high oxidation resistance and good strength at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: SS-86. Producer or source: Stainless steel foundries.

ACI TYPE CF-8C

Alloy Digest ◽  
1970 ◽  
Vol 19 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Casting Alloy ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
Iron Chromium

Abstract Type CF-8C is an iron-chromium-nickel-columbium corrosion resistant casting alloy especially useful for field welding, or for service involving long exposure to elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SS-235. Producer or source: Stainless steel foundries.

ACI TYPE HL

Alloy Digest ◽  
1977 ◽  
Vol 26 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Chromium Content ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Temperature Performance ◽  
Iron Chromium

Abstract Type HL is an austenitic iron-chromium-nickel alloy similar to ACI Type HK (Alloy Digest SS-303, December 1974); however, the higher chromium content of Type HL gives it greater resistance to corrosion by hot gases, particularly those containing appreciable amounts of sulfur. Because essentially equivalent high-temperature strength can be obtained with either the HL or HK grades, the improved corrosion resistance of the HL alloy makes it especially useful for severe service where excessive scaling must be avoided. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-341. Producer or source: Stainless steel foundries.

INCO ALLOY 330

Alloy Digest ◽  
1992 ◽  
Vol 41 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Solid Solution ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
High Temperature Alloy ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Inco Alloy ◽  
Iron Chromium

Abstract INCO ALLOY 330 is a nickel/iron/chromium austenitic alloy, not hardenable by heat treatment. It is a solid solution strengthened high-temperature alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-403. Producer or source: Inco Alloys International Inc..

CDA 710

Alloy Digest ◽  
1970 ◽  
Vol 19 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
Stress Rupture ◽  
Heat Treating ◽  
Temperature Performance ◽  
Seawater Corrosion ◽  
Stress Rupture Properties ◽  
Rupture Properties

Abstract CDA 710 is a cupro-nickel alloy having high resistance to seawater corrosion and good stress-rupture properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-215. Producer or source: Anaconda American Brass Company.

ACI HW

Alloy Digest ◽  
1957 ◽  
Vol 6 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Cyclic Heating ◽  
Nickel Base Alloy ◽  
Type Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract Type HW is a nickel-base alloy containing chromium and iron. It is austenitic, non-magnetic, and has exceptionally high resistance to corrosion, cyclic heating, and oxidation. It is of the 60 Ni-12Cr type alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-37. Producer or source: Stainless steel foundries. Revised as Alloy Digest Ni-449, April 1994.

NIROSTA 4429

Alloy Digest ◽  
2000 ◽  
Vol 49 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Pitting Corrosion ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
High Nitrogen ◽  
Temperature Performance ◽  
Pitting Corrosion Resistance

Abstract Nirosta 4429 is a low-carbon, high-nitrogen version of type 316 stainless steel. The low carbon imparts intergranular corrosion resistance while the nitrogen imparts both higher strength and some increased pitting corrosion resistance. It is recommended for use as welded parts that need not or cannot be annealed after welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-787. Producer or source: ThyssenKrupp Nirosta.

Sign in / Sign up

Export Citation Format

Share Document