Intersection Delay in Regionwide Traffic Assignment: Implications of 1994 Update of the Highway Capacity Manual

1997 ◽  
Vol 1572 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Alan J. Horowitz
Keyword(s):  
Traffic Assignment ◽  
Signalized Intersection ◽  
Multiple Equilibrium ◽  
Equilibrium Solutions ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Traffic Conditions ◽  
Traffic Delay ◽  
Transportation Research ◽  
New Procedures

The original 1985 Highway Capacity Manual (HCM85) described widely recognized relationships for traffic delay that could be incorporated into travel forecasts. Applications of the HCM85 procedures demonstrated that such delay relationships were both technically feasible and beneficial. In early 1995, the Transportation Research Board released the 1994 update to the HCM (HCM94), heavily revising the signalized and two-way stop intersection procedures and introducing a detailed all-way stop intersection procedure. These new procedures have the potential to improve the accuracy of forecasts and to make forecasts consistent with other design practices. Implementation of the HCM94 procedures into travel forecasts reveals that fewer adjustments are required to make them work within equilibrium traffic assignments. The two-way stop procedure can be used nearly intact. The signalized intersection procedure, although still requiring some adjustments, allows a greater range of traffic conditions and phasing options. The all-way stop procedure cannot be incorporated into travel forecasts because of its restrictions on allowable volumes and turning movements. Tests of the HCM94 procedures in traffic assignments indicate that they produce noticeably different results (both volumes and link delays) than the original HCM85 procedures. Multiple equilibrium solutions are possible, but the differences between these solutions are small and manageable.

Proposed Framework for Evaluating Spillback in the Highway Capacity Manual

2017 ◽  
Vol 2615 (1) ◽  
pp. 148-158
Author(s):  
Yinan Zheng ◽  
Michael Armstrong ◽  
Gustavo de Andrade ◽  
Lily Elefteriadou
Keyword(s):  
Signalized Intersection ◽  
Level Of Service ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Urban Streets ◽  
Facility Type ◽  
Street Intersection ◽  
Lane Utilization ◽  
New Procedures ◽  
Data Collection Effort

Procedures detailed in the Highway Capacity Manual 2010 (HCM 2010) estimate capacity and several operational measures dictating level of service for freeway facilities and surface streets. However, these methods do not consider cases in which spillback occurs from one facility type to another. The queuing effects in oversaturated conditions as they propagate upstream onto a freeway main line or a surface street intersection are not accounted for. The objective of this paper is to propose a series of modifications to enhance the HCM 2010 methods to address spillback conditions. These modifications consider lane utilization and lane blockage under spillback conditions and consist of restructuring existing equations and reference tables as well as developing new procedures. A four-regime method is proposed for evaluating spillback effects from urban streets to diverge and weaving segments. In addition, a method is proposed to account for the spillback effects from freeway on-ramps by reducing the effective green time as a proportion of the percent of time that the queue is expected to block the upstream signalized intersection. The framework developed uses assumptions that should be further explored through an extensive, nationwide data collection effort.

Modeling Capacity of Through Movement at Signalized Intersection Affected by Short Left-Turn Bay under Different Signal Settings

2021 ◽  
pp. 036119812110064
Author(s):  
Zihang Wei ◽  
Yunlong Zhang ◽  
Xiaoyu Guo ◽  
Xin Zhang
Keyword(s):  
Cycle Length ◽  
Signalized Intersections ◽  
Signalized Intersection ◽  
Essential Factor ◽  
Highway Capacity ◽  
Left Turn ◽  
Highway Capacity Manual ◽  
Proposed Model ◽  
Vehicle Demand ◽  
The One

Through movement capacity is an essential factor used to reflect intersection performance, especially for signalized intersections, where a large proportion of vehicle demand is making through movements. Generally, left-turn spillback is considered a key contributor to affect through movement capacity, and blockage to the left-turn bay is known to decrease left-turn capacity. Previous studies have focused primarily on estimating the through movement capacity under a lagging protected only left-turn (lagging POLT) signal setting, as a left-turn spillback is more likely to happen under such a condition. However, previous studies contained assumptions (e.g., omit spillback), or were dedicated to one specific signal setting. Therefore, in this study, through movement capacity models based on probabilistic modeling of spillback and blockage scenarios are established under four different signal settings (i.e., leading protected only left-turn [leading POLT], lagging left-turn, protected plus permitted left-turn, and permitted plus protected left-turn). Through microscopic simulations, the proposed models are validated, and compared with existing capacity models and the one in the Highway Capacity Manual (HCM). The results of the comparisons demonstrate that the proposed models achieved significant advantages over all the other models and obtained high accuracies in all signal settings. Each proposed model for a given signal setting maintains consistent accuracy across various left-turn bay lengths. The proposed models of this study have the potential to serve as useful tools, for practicing transportation engineers, when determining the appropriate length of a left-turn bay with the consideration of spillback and blockage, and the adequate cycle length with a given bay length.

Estimating the Effects of Urban Street Incidents on Capacity

2017 ◽  
Vol 2615 (1) ◽  
pp. 55-61 ◽  
Author(s):  
Aidin Massahi ◽  
Mohammed Hadi ◽  
Maria Adriana Cutillo ◽  
Yan Xiao
Keyword(s):  
Network Performance ◽  
Field Measurements ◽  
Signalized Intersection ◽  
Limited Information ◽  
Microscopic Simulation ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Urban Streets ◽  
Urban Street ◽  
Incident Duration

The effect of incidents on capacity is the most critical parameter in estimating the influence of incidents on network performance. The Highway Capacity Manual 2010 (HCM 2010) provides estimates of the drop in capacity resulting from incidents as a function of the number of blocked lanes and the total number of lanes in the freeway section. However, there is limited information on the effects of incidents on the capacity of urban streets. This study investigated the effects on capacity of the interaction between the drop in capacity below demand at a midblock urban street segment location and upstream and downstream of signalized intersection operations. A model was developed to estimate the drop in capacity at the incident location as a function of the number of blocked lanes, the distance from the downstream intersection, and the green time–to–cycle length (g:C) ratio of the downstream signal. A second model was developed to estimate the reduction in the upstream intersection capacity resulting from the drop in capacity at the midblock incident location as estimated by the first model. The second model estimated the drop in capacity of the upstream links feeding the incident locations as a function of incident duration time, the volume-to-capacity (V/C) ratio at the incident location, and distance from an upstream signalized intersection. The models were developed on the basis of data generated with the use of a microscopic simulation model calibrated by comparison with parameters suggested in HCM 2010 for incident and no-incident conditions and by comparison with field measurements.

scholarly journals Capacity of Advance Right-Turn Motorized Vehicles at Signalized Intersections for Mixed Traffic Conditions

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Bing Li ◽  
Wei Cheng ◽  
Yiming Bie ◽  
Bin Sun
Keyword(s):  
Arrival Rate ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Traffic Conditions ◽  
Capacity Model ◽  
Conflict Zone ◽  
Traffic Conflict ◽  
Motorized Vehicles ◽  
The Relationship ◽  
Gap Acceptance Theory

Right-turn motorized vehicles turn right using channelized islands, which are used to improve the capacity of intersections. For ease of description, these kinds of right-turn motorized vehicles are called advance right-turn motorized vehicles (ARTMVs) in this paper. The authors analyzed four aspects of traffic conflict involving ARTMVs with other forms of traffic flow. A capacity model of ARTMVs is presented here using shockwave theory and gap acceptance theory. The proposed capacity model was validated by comparison to the results of the observations based on data collected at a single intersection with channelized islands in Kunming, the Highway Capacity Manual (HCM) model and the VISSIM simulation model. To facilitate engineering applications, the relationship describing the capacity of the ARTMVs with reference to the distance between the conflict zone and the stop line and the relationship describing the capacity of the ARTMVs with reference to the effective red time of the nonmotorized vehicles moving in the same direction were analyzed. The authors compared these results to the capacity of no advance right-turn motorized vehicles (NARTMVs). The results show that the capacity of the ARTMVs is more sensitive to the changes in the arrival rate of nonmotorized vehicles when the arrival rate of the nonmotorized vehicles is 500  (veh/h)~2000  (veh/h) than when the arrival rate is some other value. In addition, the capacity of NARTMVs is greater than the capacity of ARTMVs when the nonmotorized vehicles have a higher arrival rate.

Determining Passenger Car Equivalent for Motorcycle at Mid-Block of Sesetan Road

2015 ◽  
Vol 776 ◽  
pp. 95-100
Author(s):  
I. Gusti Raka Purbanto
Keyword(s):  
Motor Vehicles ◽  
Heavy Vehicles ◽  
Highway Capacity ◽  
Passenger Car ◽  
Highway Capacity Manual ◽  
The Road ◽  
Traffic Conditions ◽  
Mode Share ◽  
Passenger Car Equivalent ◽  
On The Road

Motorcycle dominates traffic in Bali, particularly in urban roads, which occupy more than 85% of mode share. The three types of vehicles, i.e. motorcycles, heavy and light vehicles share the roadways together. Under mixed traffic conditions, motorcycle may be travelling in between and alongside two consecutive motor vehicles. Considering such a situation, passenger car equivalent values should be examined thoroughly. This study aims to determine passenger car equivalent (PCEs) of motorcycle at mid-block of Sesetan Road. Three approaches are used to examine the PCEs values. This study found that the PCE of motorcycles are in a range between 0.2 and 0.4. This values are about the same to the existing PCE of the Indonesian Highway Capacity Manual (1997). This study also pointed out that motorcyclists and car drivers may behave differently to the existence of motorcycles. Car drivers are more aware than motorcyclists on the existence of motorcycle on the road. Further, more samples are required to obtain comprehensive results. In addition, the presence of heavy vehicles need to be considered for future study.

scholarly journals Evaluation passenger car unit for motorcycle in Indonesia Highway Capacity Manual (Case study: Bandung and Semarang)

2018 ◽  
Vol 181 ◽  
pp. 06006
Author(s):  
Najid
Keyword(s):  
Traffic Density ◽  
Heavy Vehicles ◽  
Highway Capacity ◽  
Passenger Car ◽  
Highway Capacity Manual ◽  
Traffic Conditions ◽  
A Value ◽  
Passenger Car Unit ◽  
Set Up

Value of Passenger Car Unit or commonly known as PCU value is a value that is given to any vehicle that is classified into heavy vehicles, light vehicles (passenger car) and motorcycles. The value of passenger car unit on Indonesia Highway Capacity Manual (IHCM) set up in 1997 is based on a study conducted from 1980-1990 in several cities in Indonesia At the time of the study, the traffic conditions are very different to the current traffic conditions. That affects of difference traffic conditions are the composition of traffic, traffic regulations, traffic density, traffic discipline and the presence of mass transit, so that the results of traffic analysis do not always correspond to reality as there are anomalies in the determination of the level of road service (Najid, 2014). As well the incompatibility of the capacity value which is considered due to the incompatibility value of Passenger Car Units (PCU). Evaluation PCU become very important to get the value of traffic parameters into compliance with actually occur. In accordance with the traffic density is higher actually, then it is necessary to study for evaluation against PCU current value and the need to approach or to get the value of PCU more in line with current traffic conditions. Data collected at two cities, those are Bandung and Semarang. Based on analysis found PCU’s value that got from survey have difference but not all significantly with PCU value in IHCM.

Arrival-Based Uniform Delay Model for Oversaturated Signalized Intersections with Poor Progression

2005 ◽  
Vol 1920 (1) ◽  
pp. 86-94
Author(s):  
Rahim F. Benekohal ◽  
Sang-Ock Kim
Keyword(s):  
Signalized Intersections ◽  
Delay Model ◽  
Adjustment Factor ◽  
Highway Capacity ◽  
New Approach ◽  
Highway Capacity Manual ◽  
Traffic Conditions ◽  
Proposed Model ◽  
Uniform Delay ◽  
Control Delays

For oversaturated traffic conditions, the Highway Capacity Manual (HCM) does not apply a progression adjustment factor to the delay model for signalized intersections when there is an initial queue. This causes counterintuitive results in the calculation of delay; for some cases, delay for a nonzero initial queue condition ends up being less than the delay with zero initial queue conditions. Also, for oversaturated traffic conditions, the delay model in the 2000 edition of HCM yields the same uniform delay values for all arrival types when there is an initial queue. This does not seem reasonable because it ignores the effect of platooning on delay. This paper introduces a new approach for computing uniform delay for oversaturated traffic conditions when progression is poor. This approach directly considers the platooning effects in delay and thus eliminates the need to apply a progression adjustment factor. The proposed model is applicable whether there is an initial queue or not. The approach was validated by a comparison of the control delays obtained from a CORSIM simulation to the delays from the proposed model. Validation procedures were conducted on the basis of zero and nonzero initial queue conditions. The proposed approach resulted in more accurate delay values than the HCM model.

Effect of Bicycles on Capacity of Signalized Intersections

1998 ◽  
Vol 1646 (1) ◽  
pp. 87-95 ◽  
Author(s):  
D. Patrick Allen ◽  
Joseph E. Hummer ◽  
Nagui M. Rouphail ◽  
Joseph S. Milazzo
Keyword(s):  
Signalized Intersections ◽  
Signalized Intersection ◽  
Motor Vehicles ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Flow Adjustment ◽  
Conflict Zone ◽  
Pedestrian Traffic ◽  
Saturation Flow ◽  
The Impact

Although much is known about the operation of signalized intersections, little or no empirical research has been conducted regarding the effect of bicycles on signalized intersection capacity. The purpose of this study was to accurately quantify the effects of bicycles on signalized intersection capacity through the videotaping of several intersections that had significant bicycle traffic. Through the videotaping of intersections in Davis, California, and Gainesville, Florida, a relationship was determined between bicycle volumes and the percent of the green phase during which bicycle traffic occupies a conflict zone between bicycles and right-turning motor vehicles. It was also determined that one can ascertain the total net occupancy due to pedestrians and bicycles by taking the overlapping effects between bicycles and pedestrians into account. Using this total occupancy due to bicycles and pedestrians, one can calculate a saturation flow adjustment factor ( fRph) that reflects the reduction in saturation flow, and ultimately lane group capacity, for lane groups containing vehicles making permissive right turns in the presence of bicycles and pedestrians. The proposed procedure yields lower saturation flows and capacities than the current Highway Capacity Manual (HCM) procedure. In other words, on the basis of empirical data, when combined with pedestrian effects, the impact of bicycles on the saturation flow of lane groups containing right-turning vehicles is probably more detrimental than previously believed, and the capacities of intersections with significant bicycle and pedestrian traffic may be overestimated by using the current HCM procedures.

scholarly journals MICROSIMULATION-BASED PASSENGER CAR EQUIVALENTS FOR HEAVY VEHICLES DRIVING TURBO-ROUNDABOUTS

Transport ◽  
2016 ◽  
Vol 31 (2) ◽  
pp. 295-303 ◽  
Author(s):  
Orazio Giuffrè ◽  
Anna Granà ◽  
Sergio Marino ◽  
Fabio Galatioto
Keyword(s):  
Geometric Design ◽  
Heavy Vehicles ◽  
Passenger Cars ◽  
Highway Capacity ◽  
Passenger Car ◽  
Operational Conditions ◽  
Highway Capacity Manual ◽  
Traffic Conditions ◽  
Scenarios Simulation

Due to its geometric design, turbo-roundabouts impose greatest constraints to the vehicular trajectories; by consequence, one can expect a more unfavourable impact of heavy vehicles on the traffic conditions than on other types of roundabouts. The present paper addresses the question of how to estimate Passenger Car Equivalents (PCEs) for heavy vehicles driving turbo-roundabouts. The microsimulation approach used revealed as a useful tool for evaluating the variation of quality of traffic in presence of mixed fleets (different percentages of heavy vehicles). Based on the output of multiple runs of several scenarios simulation, capacity functions for each entry lane of the turbo-roundabout were developed and variability of the PCEs for heavy vehicles were calculated by comparing results for a fleet of passenger cars only with those of the mixed fleet scenarios. Results show a dependence of PCEs for heavy vehicles on operational conditions, which characterise the turbo-roundabout. Assuming the values of PCEs for roundabouts provided by the 2010 Highway Capacity Manual (HCM), depending on entering manoeuvring underestimation and overestimation of the effect of heavy vehicles on the quality of traffic conditions have been found.

Freeway Facility Methodology in Highway Capacity Manual 2000

2000 ◽  
Vol 1710 (1) ◽  
pp. 171-180 ◽  
Author(s):  
Brian S. Eads ◽  
Nagui M. Rouphail ◽  
Adolf D. May ◽  
Fred Hall
Keyword(s):  
Intelligent Transportation System ◽  
Simulation Models ◽  
Companion Paper ◽  
Ramp Metering ◽  
Incident Management ◽  
Highway Capacity ◽  
Time Intervals ◽  
Highway Capacity Manual ◽  
Traffic Conditions ◽  
First Time

The next edition of the Highway Capacity Manual (HCM 2000) will contain for the first time an operational analysis procedure for directional freeway facilities up to 20 to 25 km long. At the simplest level, this procedure integrates the proposed HCM 2000 methods for the analysis of basic, ramp, and weaving segments to enable the analysis of an entire facility. But the proposed facility methodology goes much further. It allows the user to analyze multiple, contiguous time intervals with timevarying demands and capacities. It can handle both undersaturated and oversaturated traffic conditions (with some limitations). In the latter case, both the spatial and time extent of congestion are estimated. Finally, the method permits the investigation of the effect of many traditional and intelligent transportation system–based freeway improvement strategies such as full or auxiliary lane additions, ramp metering, incident management, and a limited set of high-occupancy-vehicle designs on facility performance. Described here is the conceptual model for and computational steps of the methodology, with emphasis on the components for analysis of oversaturated conditions. The scope and limitations of the methods are also highlighted. Reference is given to a companion paper that describes how the results of the method were validated in the field and how they compared with those obtained from widely used freeway simulation models.

Sign in / Sign up

Export Citation Format

Share Document