Several natural threats characterize hard coal mining in Poland. The coexistence of methane and rock-burst hazards lowers the safety level during exploration. The most dangerous are high-energy bumps, which might cause rock-burst. Additionally, created during exploitation, safety pillars, which protect openings, might be the reason for the formation of so-called gas traps. In this part, rock mass is usually not disturbed and methane in seams that form the safety pillars is not dangerous as long as they remain intact. Nevertheless, during a rock-burst, a sudden methane outflow can occur. Preventing the existing hazards increases mining costs, and employing inadequate measures threatens the employees’ lives and limbs. Using two longwalls as examples, the authors discuss the consequences of the two natural hazards’ coexistence. In the area of longwall H-4 in seam 409/4, a rock-burst caused a release of approximately 545,000 cubic meters of methane into the excavations, which tripled methane concentration compared to the values from the period preceding the burst. In the second longwall (IV in seam 703/1), a bump was followed by a rock-burst, which reduced the amount of air flowing through the excavation by 30 percent compared to the airflow before, and methane release rose by 60 percent. The analyses presented in this article justify that research is needed to create and implement innovative methods of methane drainage from coal seams to capture methane more effectively at the stage of mining.
Method for designing the optimal sealing depth in methane drainage boreholes to realize efficient drainage
