scholarly journals Equivalent Single-Story Model for Reinforced Concrete Multi-Story Unsymmetric Frame Buildings with Brace-Type Steel Seismic Control Devices

2007 ◽  
Vol 18 (2) ◽  
pp. 35-48
Author(s):  
Kenji Fujii
Keyword(s):  
Reinforced Concrete ◽  
Type Steel ◽  
Seismic Control ◽  
Story Model ◽  
Frame Buildings ◽  
Control Devices

Design of precast reinforced concrete structures of frame buildings: a new set of rules

2019 ◽  
pp. 4-9 ◽  
Keyword(s):  
Reinforced Concrete ◽  
Concrete Structures ◽  
Reinforced Concrete Structures ◽  
Building Frames ◽  
Fine Grained ◽  
Rigid Frame ◽  
Floor Slabs ◽  
Frame Buildings ◽  
Spatial System ◽  
Precast Elements

Currently, prefabricated reinforced concrete structures are widely used for the construction of buildings of various functional purposes. In this regard, has been developed SP 356.1325800.2017 "Frame Reinforced Concrete Prefabricated Structures of Multi-Storey Buildings. Design Rules", which establishes requirements for the calculation and design of precast reinforced concrete structures of frame buildings of heavy, fine-grained and lightweight structural concrete for buildings with a height of not more than 75 m. The structure of the set of rules consists of eight sections and one annex. The document reviewed covers the design of multi-story framed beam structural systems, the elements of which are connected in a spatial system with rigid (partially compliant) or hinged joints and concreting of the joints between the surfaces of the abutting precast elements. The classification of structural schemes of building frames, which according to the method of accommodation of horizontal loads are divided into bracing, rigid frame bracing and framework, is presented. The list of structural elements, such as foundations, columns, crossbars, ribbed and hollow floor slabs and coatings, stiffness elements and external enclosing structures is given; detailed instructions for their design are provided. The scope of the developed set of rules includes all natural and climatic zones of the Russian Federation, except seismic areas with 7 or more points, as well as permafrost zones.

scholarly journals Cyclic Tests and Numerical Analyses on Bolt-Connected Precast Reinforced Concrete Deep Beams

2021 ◽  
Vol 11 (12) ◽  
pp. 5356
Author(s):  
Jing Li ◽  
Lizhong Jiang ◽  
Hong Zheng ◽  
Liqiang Jiang ◽  
Lingyu Zhou
Keyword(s):  
Reinforced Concrete ◽  
Failure Mode ◽  
Seismic Performance ◽  
High Strength ◽  
Length Ratio ◽  
Frame Structures ◽  
Initial Stiffness ◽  
Frame Buildings ◽  
Parametric Analyses ◽  
Bending Failure

A bolt-connected precast reinforced concrete deep beam (RDB) is proposed as a lateral resisting component that can be used in frame structures to resist seismic loads. RDB can be installed in the steel frame by connecting to the frame beam with only high-strength bolts, which is different from the commonly used cast-in-place RC walls. Two 1/3 scaled specimens with different height-to-length ratios were tested to obtain their seismic performance. The finite element method is used to model the seismic behavior of the test specimens, and parametric analyses are conducted to study the effect on the height-to-length ratio, the strength of the concrete and the height-to-thickness ratio of RDBs. The experimental and numerical results show that the RDB with a low height-to-length ratio exhibited a shear–bending failure mode, while the RDB with a high height-to-length ratio failed with a shear-dominated failure mode. By comparing the RDB with a height-to-length ratio of 2.0, the ultimate capacity, initial stiffness and ductility of the RDB with a height-to-length ratio of 0.75 increased by 277%, 429% and 141%, respectively. It was found that the seismic performance of frame structures could be effectively adjusted by changing the height-to-length ratio and length-to-thickness of the RDB. The RDB is a desirable lateral-resisting component for existing and new frame buildings.

scholarly journals Structural damages of L'Aquila (Italy) earthquake

2010 ◽  
Vol 10 (3) ◽  
pp. 499-507 ◽  
Author(s):  
H. Kaplan ◽  
H. Bilgin ◽  
S. Yilmaz ◽  
H. Binici ◽  
A. Öztas
Keyword(s):  
Reinforced Concrete ◽  
13Th Century ◽  
City Center ◽  
Concrete Frame ◽  
Wood Flooring ◽  
Frame Buildings ◽  
Historic Structures ◽  
The City ◽  
Masonry Units

Abstract. On 6 April 2009 an earthquake of magnitude 6.3 occurred in L'Aquila city, Italy. In the city center and surrounding villages many masonry and reinforced concrete (RC) buildings were heavily damaged or collapsed. After the earthquake, the inspection carried out in the region provided relevant results concerning the quality of the materials, method of construction and the performance of the structures. The region was initially inhabited in the 13th century and has many historic structures. The main structural materials are unreinforced masonry (URM) composed of rubble stone, brick, and hollow clay tile. Masonry units suffered the worst damage. Wood flooring systems and corrugated steel roofs are common in URM buildings. Moreover, unconfined gable walls, excessive wall thicknesses without connection with each other are among the most common deficiencies of poorly constructed masonry structures. These walls caused an increase in earthquake loads. The quality of the materials and the construction were not in accordance with the standards. On the other hand, several modern, non-ductile concrete frame buildings have collapsed. Poor concrete quality and poor reinforcement detailing caused damage in reinforced concrete structures. Furthermore, many structural deficiencies such as non-ductile detailing, strong beams-weak columns and were commonly observed. In this paper, reasons why the buildings were damaged in the 6 April 2009 earthquake in L'Aquila, Italy are given. Some suggestions are made to prevent such disasters in the future.

Sign in / Sign up

Export Citation Format

Share Document