scholarly journals Tidal current and scouring around the pier.

1990 ◽  
Vol 10 (36) ◽  
pp. 29-33
Author(s):  
Satoshi KASHIMA
Keyword(s):  
Tidal Current

Spatial Distribution of Plankton around Artificial Reefs with Variation in the Tidal Current Direction

2018 ◽  
Vol 6 (2) ◽  
pp. 39-49
Author(s):  
Gyung-Sun Lee ◽  
Dong-Sun Kim ◽  
Han-Sam Yoon ◽  
Seok-Nam Kwak
Keyword(s):  
Spatial Distribution ◽  
Tidal Current ◽  
Artificial Reefs ◽  
Current Direction

scholarly journals Optimal Sizing of an Island Hybrid Microgrid Based on Improved Multi-Objective Grey Wolf Optimizer

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1581
Author(s):  
Wenqiang Zhu ◽  
Jiang Guo ◽  
Guo Zhao ◽  
Bing Zeng
Keyword(s):  
Power Supply ◽  
Tidal Current ◽  
System Optimization ◽  
Energy System ◽  
Energy Sources ◽  
Grey Wolf Optimizer ◽  
Grey Wolf ◽  
Hybrid Energy System ◽  
Hybrid Energy ◽  
Multi Objective

The hybrid renewable energy system is a promising and significant technology for clean and sustainable island power supply. Among the abundant ocean energy sources, tidal current energy appears to be very valuable due to its excellent predictability and stability, particularly compared with the intermittent wind and solar energy. In this paper, an island hybrid energy microgrid composed of photovoltaic, wind, tidal current, battery and diesel is constructed according to the actual energy sources. A sizing optimization method based on improved multi-objective grey wolf optimizer (IMOGWO) is presented to optimize the hybrid energy system. The proposed method is applied to determine the optimal system size, which is a multi-objective problem including the minimization of annualized cost of system (CACS) and deficiency of power supply probability (DPSP). MATLAB software is utilized to program and simulate the hybrid energy system. Optimization results confirm that IMOGWO is feasible to optimally size the system, and the energy management strategy effectively matches the requirements of system operation. Furthermore, comparison of hybrid systems with and without tidal current turbines is undertaken to confirm that the utilization of tidal current turbines can contribute to enhancing system reliability and reducing system investment, especially in areas with abundant tidal energy sources.

scholarly journals Tidal Current Energy for Indian Coastal Lines – A State Art of Review

2020 ◽  
Vol 1716 ◽  
pp. 012008
Author(s):  
P Vyshnavi ◽  
Nithya Venkatesan ◽  
A. Samad ◽  
E.J. Avital
Keyword(s):  
Tidal Current ◽  
Tidal Current Energy ◽  
Current Energy

scholarly journals Morphodynamic Evolution of a Nourished Beach with Artificial Sandbars: Field Observations and Numerical Modeling

2021 ◽  
Vol 9 (3) ◽  
pp. 245
Author(s):  
Cuiping Kuang ◽  
Xuejian Han ◽  
Jiabo Zhang ◽  
Qingping Zou ◽  
Boling Dong
Keyword(s):  
Sediment Transport ◽  
Tidal Current ◽  
Model Simulation ◽  
Morphological Changes ◽  
Current Model ◽  
Beach Nourishment ◽  
Tidal Range ◽  
Coastal Protection ◽  
Field Observations ◽  
One Year

Beach nourishment, a common practice to replenish an eroded beach face with filling sand, has become increasingly popular as an environmentally friendly soft engineering measure to tackle coastal erosion. In this study, three 200 m long offshore submerged sandbars were placed about 200 m from the shore in August 2017 for both coastal protection and beach nourishment at Shanhai Pass, Bohai Sea, northeastern China. A series of 21 beach profiles were collected from August 2017 to July 2018 to monitor the morphological changes of the nourished beach. Field observations of wave and tide levels were conducted for one year and tidal current for 25 h, respectively. To investigate the spatial-temporal responses of hydrodynamics, sediment transport, and morphology to the presence of three artificial submerged sandbars, a two-dimensional depth-averaged (2DH) multi-fraction sediment transport and morphological model were coupled with wave and current model and implemented over a spatially varying nested grid. The model results compare well with the field observations of hydrodynamics and morphological changes. The tidal range was around 1.0 m and the waves predominately came from the south-south-east (SSE) direction in the study area. The observed and predicted beach profiles indicate that the sandbars moved onshore and the morphology experienced drastic changes immediately after the introduction of sandbars and reached an equilibrium state in about one year. The morphological change was mainly driven by waves. Under the influences of the prevailing waves and the longshore drift toward the northeast, the coastline on the leeside of the sandbars advanced seaward by 35 m maximally while the rest adjacent coastline retreated severely by 44 m maximally within August 2017–July 2018. The model results demonstrate that the three sandbars have little effect on the tidal current but attenuate the incoming wave significantly. As a result, the medium-coarse sand of sandbars is transported onshore and the background silt is mainly transported offshore and partly in the longshore direction toward the northeast. The 2- and 5-year model simulation results further indicate that shoreline salient may form behind the sandbars and protrude offshore enough to reach the sandbars, similar to the tombolo behind the breakwater.

scholarly journals An FTC Design via Multiple SOGIs with Suppression of Harmonic Disturbances for Five-Phase PMSG-Based Tidal Current Applications

2021 ◽  
Vol 9 (6) ◽  
pp. 574
Author(s):  
Zhuo Liu ◽  
Tianhao Tang ◽  
Azeddine Houari ◽  
Mohamed Machmoum ◽  
Mohamed Fouad Benkhoris
Keyword(s):  
Fault Tolerance ◽  
Energy Conversion ◽  
Tidal Current ◽  
Fault Tolerant ◽  
Tidal Current Energy ◽  
Electromagnetic Forces ◽  
Model Free ◽  
Energy Conversion Systems ◽  
Power Scale ◽  
Current Energy

This paper firstly adopts a fault accommodation structure, a five-phase permanent magnet synchronous generator (PMSG) with trapezoidal back-electromagnetic forces, in order to enhance the fault tolerance of tidal current energy conversion systems. Meanwhile, a fault-tolerant control (FTC) method is proposed using multiple second-order generalized integrators (multiple SOGIs) to further improve the systematic fault tolerance. Then, additional harmonic disturbances from phase current or back-electromagnetic forces in original and Park’s frames are characterized under a single-phase open condition. Relying on a classical field-oriented vector control scheme, fault-tolerant composite controllers are then reconfigured using multiple SOGIs by compensating q-axis control commands. Finally, a real power-scale simulation setup with a gearless back-to-back tidal current energy conversion chain and a small power-scale laboratory prototype in machine side are established to comprehensively validate feasibility and fault tolerance of the proposed method. Simulation results show that the proposed method is able to suppress the main harmonic disturbances and maintain a satisfactory fault tolerance when third harmonic flux varies. Experimental results reveal that the proposed model-free fault-tolerant design is simple to implement, which contributes to better fault-tolerant behaviors, higher power quality and lower copper losses. The main advantage of the multiple SOGIs lies in convenient online implementation and efficient multi-harmonic extractions, without considering system’s model parameters. The proposed FTC design provides a model-free fault-tolerant solution to the energy harvested process of actual tidal current energy conversion systems under different working conditions.

scholarly journals Tidal current resource assessment

2007 ◽  
Vol 221 (2) ◽  
pp. 125-135 ◽  
Author(s):  
I. G. Bryden ◽  
S. J. Couch ◽  
A Owen ◽  
G Melville
Keyword(s):  
Tidal Current ◽  
Resource Assessment ◽  
Current Resource

A note on tidal current rotation

2004 ◽  
Vol 54 (5) ◽  
pp. 531-536 ◽  
Author(s):  
Noel Carbajal
Keyword(s):  
Tidal Current
Sign in / Sign up

Export Citation Format

Share Document