scholarly journals REKONTRUKSI MODEL 3D DARI BANYAK GAMBAR MENGGUNAKAN ALGORITMA STRUCTURE FROM MOTION (SFM) DAN MULTI VIEW STEREO (MVS) BERBASIS COMPUTER VISION

2020 ◽  
Vol 3 (2) ◽  
pp. 108-113
Author(s):  
Moch.d Kholil ◽  
Ismanto Ismanto ◽  
M. Nur Fu’ad
Keyword(s):  
3D Reconstruction ◽  
3D Modeling ◽  
Structure From Motion ◽  
3D Model ◽  
Three Dimensional ◽  
Original Image ◽  
Architecture Education ◽  
Reconstruction Process ◽  
3D Objects ◽  
3D Model Reconstruction

With the development of the field of Information and Computer Technology (ICT), three-dimensional technology (3D) is also growing rapidly. Currently, the need to visualize 3D objects is widely used in animation and graphics applications, architecture, education, cultural recognition and virtual reality. 3D modeling of historical buildings has become a concern in recent years. 3D reconstruction is a documentation effort for reconstruction or restoration if the building is destroyed. By using a 3D model reconstruction approach based on multiple images using the Structure From Motion (SFM) and Multi View Stereo (MVS) algorithm, it is hoped that the 3D modeling results can be used as an effort to preserve 3D objects in the cultural heritage area of Penataran Temple. This research was conducted by taking an object in the form of photos as many as 61 pictures in the area of ​​the Blitar Penataran Temple. The resulting photos are reconstructed into a 3D model using the Structure From Motion algorithm in the meshroom. In this study, a test was carried out on the original image with the compressed image for reconstruction to be compared to the 3D reconstruction process from the two input data. From 61 images processed using the Structure Form Motion algorithm, 33 camera pose and 3D point data were obtained, both original and compressed images. For the number of iterations the compressed image is 1.4% less than the original image and takes 43.53% faster than the original image.  

Pipes Information Recognition and 3D Model Reconstruction Based on DWGDirect

2013 ◽  
Vol 427-429 ◽  
pp. 2454-2457
Author(s):  
Hong Yi Li ◽  
Xi Wen ◽  
Di Zhao
Keyword(s):  
3D Reconstruction ◽  
3D Modeling ◽  
Architectural Design ◽  
3D Model ◽  
Model Reconstruction ◽  
Municipal Planning ◽  
Modeling Procedure ◽  
3D Model Reconstruction ◽  
Novel Method ◽  
Information Recognition

This paper mainly discusses the 3D reconstruction of pipelines from 2D DWG format files, which are widely used in architectural design, municipal planning and so on. To address this nontrivial problem, a novel method is proposed, which consists of two steps. In the first step, the entity information is extracted from DWG format files based on the DWGDirect technology. Subsequently, a 3D modeling procedure is followed by using OpenSceneGraph and the extracted entity information. Several experimental instances are given to demonstrate the validity of the proposed method.

Detection, Averaging, and 3D Reconstruction of Biological Specimens on Hypercubes (Transputer-based) Computers

1990 ◽  
Vol 48 (1) ◽  
pp. 454-455
Author(s):  
Jose-Maria Carazo ◽  
I. Benavides ◽  
S. Marco ◽  
J.L. Carrascosa ◽  
E.L. Zapata
Keyword(s):  
3D Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Software Tools ◽  
Mapping Method ◽  
Computer Architectures ◽  
Parallel Computer ◽  
Reconstruction Process ◽  
Computing Power ◽  
Order Of Magnitude

Obtaining the three-dimensional (3D) structure of negatively stained biological specimens at a resolution of, typically, 2 - 4 nm is becoming a relatively common practice in an increasing number of laboratories. A combination of new conceptual approaches, new software tools, and faster computers have made this situation possible. However, all these 3D reconstruction processes are quite computer intensive, and the middle term future is full of suggestions entailing an even greater need of computing power. Up to now all published 3D reconstructions in this field have been performed on conventional (sequential) computers, but it is a fact that new parallel computer architectures represent the potential of order-of-magnitude increases in computing power and should, therefore, be considered for their possible application in the most computing intensive tasks.We have studied both shared-memory-based computer architectures, like the BBN Butterfly, and local-memory-based architectures, mainly hypercubes implemented on transputers, where we have used the algorithmic mapping method proposed by Zapata el at. In this work we have developed the basic software tools needed to obtain a 3D reconstruction from non-crystalline specimens (“single particles”) using the so-called Random Conical Tilt Series Method. We start from a pair of images presenting the same field, first tilted (by ≃55°) and then untilted. It is then assumed that we can supply the system with the image of the particle we are looking for (ideally, a 2D average from a previous study) and with a matrix describing the geometrical relationships between the tilted and untilted fields (this step is now accomplished by interactively marking a few pairs of corresponding features in the two fields). From here on the 3D reconstruction process may be run automatically.

scholarly journals Dynamic modeling of tunnel survey spatiotemporal data

2014 ◽  
Vol 20 (2) ◽  
pp. 354-375
Author(s):  
Xiaolong Li ◽  
Jiansi Yang ◽  
Bingxuan Guo ◽  
Hua Liu ◽  
Jun Hua
Keyword(s):  
Survey Data ◽  
Cross Section ◽  
Cross Sections ◽  
3D Modeling ◽  
3D Model ◽  
Three Dimensional ◽  
Spatiotemporal Data ◽  
Excavation Process ◽  
Special Cases ◽  
Time Stamps

Currently, for tunnels, the design centerline and design cross-section with time stamps are used for dynamic three-dimensional (3D) modeling. However, this approach cannot correctly reflect some qualities of tunneling or some special cases, such as landslips. Therefore, a dynamic 3D model of a tunnel based on spatiotemporal data from survey cross-sections is proposed in this paper. This model can not only playback the excavation process but also reflect qualities of a project typically missed. In this paper, a new conceptual model for dynamic 3D modeling of tunneling survey data is introduced. Some specific solutions are proposed using key corresponding technologies for coordinate transformation of cross-sections from linear engineering coordinates to global projection coordinates, data structure of files and database, and dynamic 3D modeling. A 3D tunnel TIN model was proposed using the optimized minimum direction angle algorithm. The last section implements the construction of a survey data collection, acquisition, and dynamic simulation system, which verifies the feasibility and practicality of this modeling method.

scholarly journals REPRESENTATION AND DIGITALIZATION OF STONE THEATRES IN EASTERN SICILY: THE PALAZZOLO ACREIDE THEATER

2019 ◽  
Vol XLII-2/W11 ◽  
pp. 475-479
Author(s):  
G. Di Gregorio
Keyword(s):  
Structure From Motion ◽  
3D Model ◽  
Southern Italy ◽  
Three Dimensional ◽  
Cultural Value ◽  
Geometric Conditions ◽  
Dense Matching ◽  
Laser Scanners ◽  
First Results ◽  
Quality And Reliability

<p><strong>Abstract.</strong> The ancient theatres in Sicily, in southern Italy and along the countries facing the Mediterranean Sea basin, constitute a reality of incomparable cultural value. Regarding the research on the ancient theatres of eastern Sicily, few studies have been recently dealt with different methodologies. In the last years some practices have been done using 3D laser scanners for the theatres of Syracuse, Taormina and Morgantina, as well as the Syracuse amphitheatre and Taormina Odeon, just obtaining very interesting results. Lately the theatre of Palazzolo Acreide (Syracuse) has been studied, with Structure From Motion (SFM) and Dense Matching methodologies. From these experience, conclusions could be drawn on the quality and reliability of the elaborations realised with the SFM methodologies. We really know that these systems are today representing one of the fastest growing areas of examination, on which several software houses are investing. The study was chosen both for the small size of the building, and for the particular geometric conditions typical of the architecture of ancient theatres. This because their three-dimensional trend varies continually in the three variables X, Y, Z. The purpose of the work was to check whether the latest releases of these systems of survey allow today more than yesterday, a rapid digitalization and representation of the enormous archaeological cultural heritage. Various software were used, to verify the practicality and operation, the choice then fell on the Zephyr of 3DFlow, kindly available by the manufacturer, whose results were quite agreeable. The possibility offered by the program of a graphical tracing of polylines on the textured 3D model, has been a considerable advantage. Therefore the results obtained by modeling and surveying of the Palazzolo Acreide theatre have been compared, with the survey of the Syracuse, Taormina and Morgantina theatre performed using 3D laser scanners. First results of the research are matter of the following work.</p>

Three-Dimensional Modeling of Container Cranes

2013 ◽  
Author(s):  
Andrea Arena ◽  
Arnaldo Casalotti ◽  
Walter Lacarbonara ◽  
Matthew P. Cartmell
Keyword(s):  
3D Modeling ◽  
3D Model ◽  
Initial Conditions ◽  
Three Dimensional ◽  
Container Cranes ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Time Marching ◽  
Constrained Model ◽  
2D And 3D

This work deals with three-dimensional (3D) modeling of container cranes including the hoisting cable length commands. The proposed models allow to effectively study the 3D motion caused by the eccentricity of initial conditions or loading conditions such as those induced by wind. The container is modeled as a 3D rigid body while the hoisting cables are treated either as inextensible trusses or as linearly elastic straight, taut cables. The 3D model with inextensible cables is shown to coalesce into existing two-dimensional models under the relevant planarity constraints. Details about the treatment of the internal inextensibility constraints are discussed. Time-marching simulations are carried out to show representative 2D and 3D responses to initial conditions and commanded motion of the trolley. The main differences between the constrained model and that with the elasticity of the cables are highlighted in the framework of a few significant design scenarios.

scholarly journals Studies on Three-Dimensional (3D) Modeling of UAV Oblique Imagery with the Aid of Loop-Shooting

2018 ◽  
Vol 7 (9) ◽  
pp. 356 ◽  
Author(s):  
Jia Li ◽  
Yongxiang Yao ◽  
Ping Duan ◽  
Yun Chen ◽  
Shuang Li ◽  
...  
Keyword(s):  
3D Modeling ◽  
Large Scale ◽  
3D Model ◽  
Three Dimensional ◽  
Scale Model ◽  
Scene Modeling ◽  
Standard Scale ◽  
Large Scale Model ◽  
City Construction ◽  
Key Steps

Oblique imagery obtained from an Unmanned Aerial Vehicle (UAV) has been widely applied to large-scale three-dimensional (3D) reconstruction; however, the problems of partially missing model details caused by such factors as occlusion, distortion, and airflow, are still not well resolved. In this paper, a loop-shooting-aided technology is used to solve the problem of details loss in the 3D model. The use of loop-shooting technology can effectively compensate for losses caused by occlusion, distortion, or airflow during UAV flight and enhance the 3D model details in large scene- modeling applications. Applying this technology involves two key steps. First, based on the 3D modeling construction process, the missing details of the modeling scene are found. Second, using loop-shooting image sets as the data source, incremental iterative fitting based on aerotriangulation theory is used to compensate for the missing details in the 3D model. The experimental data used in this paper were collected from Yunnan Normal University, Chenggong District, Kunming City, Yunnan Province, China. The experiments demonstrate that loop-shooting significantly improves the aerotriangulation accuracy and effectively compensates for defects during 3D large-scale model reconstruction. In standard-scale distance tests, the average relative accuracy of our modeling algorithm reached 99.87% and achieved good results. Therefore, this technique not only optimizes the model accuracy and ensures model integrity, but also simplifies the process of refining the 3D model. This study can be useful as a reference and as scientific guidance in large-scale stereo measurements, cultural heritage protection, and smart city construction.

Three- dimensional reconstruction of the thorax in the mongoose (Herpestes ichneumon)

2018 ◽  
Author(s):  
Sema Ozkadif ◽  
Ayse Haligur ◽  
Emrullah Eken
Keyword(s):  
3D Reconstruction ◽  
3D Modeling ◽  
Traffic Accidents ◽  
Three Dimensional ◽  
Thoracic Cavity ◽  
Wild Animals ◽  
Modeling Techniques ◽  
Dimensional Reconstruction ◽  
Modeling Software ◽  
Herpestes Ichneumon

Three- dimensional (3D) reconstruction obtained by using multidetector computed tomography (MDCT) images have widely been used in anatomical studies. Thorax is one of the most important body cavities necessary for the protection of lungs and heart in mammals. Two adult mongooses (1 male, 1 female) obtained from traffic accidents were used in this study. The images obtained from MDCT were stacked and 3D reconstruction of thorax was performed by overlaying images using a 3D modeling software (Mimics 13.1). Some measurements of thoracic cavity, lungs and sternum were taken from the reconstructive images of mongoose and indexes were calculated from these measurements. The morphometric parameters were recorded for both sexes. From the study, it could be concluded that the thoracic cavity, lungs and sternum imagings and findings revealed by 3D modeling techniques can be utilized for anatomical training of wild animals. This study is expected to help in the diagnosis and treatment of thorax diseases in wild animals.

scholarly journals Possibilities of Preoperative Medical Models Made by 3D Printing or Additive Manufacturing

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Mika Salmi
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
3D Modeling ◽  
Mechanical Engineering ◽  
3D Model ◽  
Model Reconstruction ◽  
3D Model Reconstruction ◽  
Wide Range ◽  
Printing Processes ◽  
Binder Jetting

Most of the 3D printing applications of preoperative models have been focused on dental and craniomaxillofacial area. The purpose of this paper is to demonstrate the possibilities in other application areas and give examples of the current possibilities. The approach was to communicate with the surgeons with different fields about their needs related preoperative models and try to produce preoperative models that satisfy those needs. Ten different kinds of examples of possibilities were selected to be shown in this paper and aspects related imaging, 3D model reconstruction, 3D modeling, and 3D printing were presented. Examples were heart, ankle, backbone, knee, and pelvis with different processes and materials. Software types required were Osirix, 3Data Expert, and Rhinoceros. Different 3D printing processes were binder jetting and material extrusion. This paper presents a wide range of possibilities related to 3D printing of preoperative models. Surgeons should be aware of the new possibilities and in most cases help from mechanical engineering side is needed.

Three-Dimensional Recognition Technology for Rare English Words

2014 ◽  
Vol 644-650 ◽  
pp. 4121-4124
Author(s):  
Qiang Chen ◽  
Li Mei Xu
Keyword(s):  
3D Modeling ◽  
3D Model ◽  
Parallel Evolution ◽  
Three Dimensional ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
3D Data ◽  
Evolution Computation ◽  
Fitting In ◽  
The Relationship

This paper mainly studies modeling and recognition of 3D English words’ images. With the development of secondary modeling, segmentation and recognition theories and the application of evolution computation in 3D modeling and recognition, this paper analyzes the issues of parameter fitting in the 3D model, multi-object scene segmentation and parts recognition aiming at the 3D data features in the English words. The 3D model is used as the primitives part to model and segment the scenes and the group parallel evolution and the relationship matching theories are introduced into the 3D modeling and recognition to deeply identify the rare English words’ images. The paper searches for a practical and efficient three-dimensional modeling and identification scheme.

scholarly journals Three-Dimensional Model Extraction and Parameter Measurement of Cerebral Hemangioma Based on Mimics

2022 ◽  
Vol 2160 (1) ◽  
pp. 012012
Author(s):  
An Qu ◽  
Tianmin Guan ◽  
Tianxiang Gan ◽  
Yuanyuan Li ◽  
Zhuang Lin ◽  
...  
Keyword(s):  
Therapeutic Effect ◽  
Cerebral Angiography ◽  
Structural Design ◽  
3D Model ◽  
Three Dimensional ◽  
The Body ◽  
Model Reconstruction ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
3D Model Reconstruction

Abstract In this paper, Mimics is using to reconstruct the 3D model of hemangioma from 2D cerebral angiography images. The process of 3D model reconstruction is formulated. The hemangioma model is extracted and the parameters of the hemangioma are measured, which provided a model basis for the structural design of the spring coil. The shape and structure of the coil are very important for the therapeutic effect. During the treatment, the coil is implanted into the hemangioma from outside the body through a catheter.

Sign in / Sign up

Export Citation Format

Share Document