Mechanical Characteristics of Vacuum Thermal Insulation Panels: Deformation Diagrams, Strength, Deformation Modules

2020 ◽  
Vol 785 (10) ◽  
pp. 44-51
Author(s):  
V.P. SELYAEV ◽  
◽  
L.I. KUPRIYASHKINA ◽  
E.L. KECHUTKINA ◽  
N.N. KISELEV ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Shear Modulus ◽  
Mechanical Characteristics ◽  
Experimental Studies ◽  
Compressive Load ◽  
Quantitative Ratio ◽  
Vacuum Insulation ◽  
Powder Filler ◽  
Modulus Of Deformation ◽  
Strength Models

The results of studying the mechanical properties of vacuum insulation panels are presented. The compressive strength and deformation modules (elastic and secant) under compression and shear are determined. The dependence of the mechanical characteristics of vacuum insulation panels (VIP) on the type and quantitative ratio of fillers is shown. It is established that the diagram of deformation of the VIP under compression can be described by an analytical function. Experimental studies of the properties of VIP have established that the deformation diagram of VIP has the form characteristic for materials that self-strengthen during loading with a compressive load and is adequately described by the function of G. V. Bulfinger. A method is proposed for determining the coefficients α and β that makes it possible to verify the approximating function using experimental data. Polynomial models describing the dependence of the elastic modulus, strength, and thermal conductivity coefficient on the composition and quantitative ratio of fiber and powder fillers are developed. It is established that the numerical values of the strain modulus depend on the type, amount of powder filler, and their ratio to the fibrous filler. The values of strain and strength models increase with increasing content and size of filler particles. A method for determining the shear modulus for VIP has been developed. It has been experimentally established that the value of the shear modulus for VIP depends on both the filler composition and the characteristics of the panel film shell. Keywords: vacuum insulation panel, diatomite, silica fume, thermal conductivity, strength, compression, shear, modulus of deformation.

scholarly journals DIAGRAMS OF VACUUM INSULATING PANEL DEFORMATION DURING COMPRESSION

2019 ◽  
Vol 9 (3) ◽  
pp. 17-21
Author(s):  
Vladimir P. SELYAEV ◽  
Nikolay N. KISELEV ◽  
Oleg V. LIYASKIN
Keyword(s):  
Stress State ◽  
Load Transfer ◽  
Experimental Studies ◽  
Compressive Load ◽  
Deformation Diagram ◽  
Vacuum Insulation ◽  
Floor Slabs ◽  
Wall Panels ◽  
The Relationship ◽  
Deformation Diagrams

The possibility of using vacuum insulation panels (VIP) with a granular filler for the manufacture of threelayer enclosing wall panels, floor slabs and coatings is considered. The results of experimental studies of vacuum insulation panels, carried out with the aim of analytically describing the deformation diagrams of VIP panels under the action of a compressive load, are presented. It has been established: deformative properties of vacuum insulation panels with granular filler do not depend on the size of the filler particles, but depend on the volume content of the filler; a deformation diagram describing the relationship between stresses and relative deformations during compression of a vacuum insulating panel with a granular filler can be approximated by the function G. B. Bülfinger. The results obtained make it possible by calculation to determine the stress state in flat plating sheets during local load transfer.

Determining the thermal resistance of a highly insulated wall containing vacuum insulation panels through experimental, calculation and numerical simulation methods

2020 ◽  
pp. 174425912098003
Author(s):  
Travis V Moore ◽  
Cynthia A. Cruickshank ◽  
Ian Beausoleil-Morrison ◽  
Michael Lacasse
Keyword(s):  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Effective Thermal Conductivity ◽  
Edge Effect ◽  
3D Simulation ◽  
Simulation Methods ◽  
Zone Method ◽  
Vacuum Insulation ◽  
Thermal Bridges ◽  
Wall Assembly

The purpose of this paper is to investigate the potential for calculation methods to determine the thermal resistance of a wall system containing vacuum insulation panels (VIPs) that has been experimentally characterised using a guarded hot box (GHB) apparatus. The VIPs used in the wall assembly have not been characterised separately to the wall assembly, and therefore exact knowledge of the thermal performance of the VIP including edge effect is not known. The calculations and simulations are completed using methods found in literature as well as manufacturer published values for the VIPs to determine the potential for calculation and simulation methods to predict the thermal resistance of the wall assembly without the exact characterisation of the VIP edge effect. The results demonstrate that disregarding the effect of VIP thermal bridges results in overestimating the thermal resistance of the wall assembly in all calculation and simulation methods, ranging from overestimates of 21% to 58%. Accounting for the VIP thermal bridges using the manufacturer advertised effective thermal conductivity of the VIPs resulted in three methods predicting the thermal resistance of the wall assembly within the uncertainty of the GHB results: the isothermal planes method, modified zone method and the 3D simulation. Of these methods only the 3D simulation can be considered a potential valid method for energy code compliance, as the isothermal planes method requires too drastic an assumption to be valid and the modified zone method requires extrapolating the zone factor beyond values which have been validated. The results of this work demonstrate that 3D simulations do show potential for use in lieu of guarded hot box testing for predicting the thermal resistance of wall assemblies containing both VIPs and steel studs. However, knowledge of the VIP effective thermal conductivity is imperative to achieve reasonable results.

Possible Mechanisms for Thermal Conductivity Enhancement in Nanofluids

2006 ◽  
Author(s):  
Amit Gupta ◽  
Xuan Wu ◽  
Ranganathan Kumar
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Brownian Motion ◽  
Brownian Dynamics ◽  
Lattice Vibration ◽  
Experimental Studies ◽  
High Heat ◽  
Conductivity Enhancement ◽  
High Heat Transfer ◽  
Dynamics Simulations

This study discusses the merits of various physical mechanisms that are responsible for enhancing the heat transfer in nanofluids. Experimental studies have cemented the claim that ‘seeding’ liquids with nanoparticles can increase the thermal conductivity of the nanofluid by up to 40% for metallic and oxide nanoparticles dispersed in a base liquid. Experiments have also shown that the rise in conductivity of the nanofluid is highly dependent on the size and concentration of the nanoparticles. On the theoretical side, traditional models like Maxwell or Hamilton-Crosser models cannot explain this unusually high heat transfer. Several mechanisms have been postulated in the literature such as Brownian motion, thermal diffusion in nanoparticles and thermal interaction of nanoparticles with the surrounding fluid, the formation of an ordered liquid layer on the surface of the nanoparticle and microconvection. This study concentrates on 3 possible mechanisms: Brownian dynamics, microconvection and lattice vibration of nanoparticles in the fluid. By considering two nanofluids, copper particles dispersed in ethylene glycol, and silica in water, it is determined that translational Brownian motion of the nanoparticles, presence of an interparticle potential and the microconvection heat transfer are mechanisms that play only a smaller role in the enhancement of thermal conductivity. On the other hand, the lattice vibrations, determined by molecular dynamics simulations show a great deal of promise in increasing the thermal conductivity by as much as 23%. In a simplistic sense, the lattice vibration can be regarded as a means to simulate the phononic transport from solid to liquid at the interface.

Quantitative Experimental Study of SiO2-Water Nanofluids on Backward-Facing Step Flow under Low Reynolds Number

2018 ◽  
Vol 916 ◽  
pp. 221-225
Author(s):  
Ji Zu Lv ◽  
Liang Yu Li ◽  
Cheng Zhi Hu ◽  
Min Li Bai ◽  
Sheng Nan Chang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Volume Fraction ◽  
Pure Water ◽  
Experimental Studies ◽  
Flow Characteristics ◽  
Thermal Engineering ◽  
Heat Transfer Medium ◽  
Step Flow

Nanofluids is an innovative study of nanotechnology applied to the traditional field of thermal engineering. It refers to the metal or non-metallic nanopowder was dispersed into water, alcohol, oil and other traditional heat transfer medium, to prepared as a new heat transfer medium with high thermal conductivity. The role of nanofluids in strengthening heat transfer has been confirmed by a large number of experimental studies. Its heat transfer mechanism is mainly divided into two aspects. On the one hand, the addition of nanoparticles enhances the thermal conductivity. On the other hand, due to the interaction between the nanoparticles and base fluid causing the changes in the flow characteristics, which is also the main factor affecting the heat transfer of nanofluids. Therefore, a intensive study on the flow characteristics of nanofluids will make the study of heat transfer more meaningful. In this experiment, the flow characteristics of SiO2-water nanofluids in two-dimensional backward step flow are quantitatively studied by PIV. The results show that under the same Reynolds number, the turbulence of nanofluids is larger than that of pure water. With the increase of nanofluids volume fraction, the flow characteristics are constantly changing. The quantitative analysis proved that the nanofluids disturbance was enhanced compared with the base liquid, which resulting in the heat transfer enhancement.

scholarly journals Mechanical and Thermal Conductivity Properties of Enhanced Phases in Mg-Zn-Zr System from First Principles

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2010
Author(s):  
Shuo Wang ◽  
Yuhong Zhao ◽  
Huijun Guo ◽  
Feifei Lan ◽  
Hua Hou
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Shear Modulus ◽  
Bulk Modulus ◽  
Intermetallic Compounds ◽  
Elastic Constants ◽  
First Principles ◽  
Strengthening Phases ◽  
Zr Alloy ◽  
Zr Alloys

In this paper, the mechanical properties and minimum thermal conductivity of ZnZr, Zn2Zr, Zn2Zr3, and MgZn2 are calculated from first principles. The results show that the considered Zn-Zr intermetallic compounds are effective strengthening phases compared to MgZn2 based on the calculated elastic constants and polycrystalline bulk modulus B, shear modulus G, and Young’s modulus E. Meanwhile, the strong Zn-Zr ionic bondings in ZnZr, Zn2Zr, and Zn2Zr3 alloys lead to the characteristics of a higher modulus but lower ductility than the MgZn2 alloy. The minimum thermal conductivity of ZnZr, Zn2Zr, Zn2Zr3, and MgZn2 is 0.48, 0.67, 0.68, and 0.49 W m−1 K−1, respectively, indicating that the thermal conductivity of the Mg-Zn-Zr alloy could be improved as the precipitation of Zn atoms from the α-Mg matrix to form the considered Zn-Zr binary alloys. Based on the analysis of the directional dependence of the minimum thermal conductivity, the minimum thermal conductivity in the direction of [110] can be identified as a crucial short limit for the considered Zn-Zr intermetallic compounds in Mg-Zn-Zr alloys.

scholarly journals Thermal insulation properties of green vacuum insulation panel using wood fiber as core material

BioResources ◽  
2019 ◽  
Vol 14 (2) ◽  
pp. 3339-3351 ◽  
Author(s):  
Baowen Wang ◽  
Zhihui Li ◽  
Xinglai Qi ◽  
Nairong Chen ◽  
Qinzhi Zeng ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Bulk Density ◽  
Thermal Insulation ◽  
Wood Fiber ◽  
Core Material ◽  
High Porosity ◽  
Total Thermal Conductivity ◽  
Wood Fibers ◽  
Vacuum Insulation ◽  
Vacuum Insulation Panel

Wood fibers were prepared as core materials for a vacuum insulation panel (VIP) via a dry molding process. The morphology of the wood fibers and the microstructure, pore structure, transmittance, and thermal conductivity of the wood fiber VIP were tested. The results showed that the wood fibers had excellent thermal insulation properties and formed a porous structure by interweaving with one another. The optimum bulk density that led to a low-cost and highly thermally efficient wood fiber VIP was 180 kg/m3 to 200 kg/m3. The bulk density of the wood fiber VIP was 200 kg/m3, with a high porosity of 78%, a fine pore size of 112.8 μm, and a total pore volume of 7.0 cm3·g-1. The initial total thermal conductivity of the wood fiber VIP was 9.4 mW/(m·K) at 25 °C. The thermal conductivity of the VIP increased with increasing ambient temperature. These results were relatively good compared to the thermal insulation performance of current biomass VIPs, so the use of wood fiber as a VIP core material has broad application prospects.

Sign in / Sign up

Export Citation Format

Share Document