EVALUATION OF THE ABSORPTION CAPACITY OF THE CENOMANIAN AQUIFER IN GROUNDS OF WASTEWATER INJECTION ON THE EXAMPLE OF ZAPOLYARNOYE OIL/GAS-CONDENSATE FIELD

2017 ◽  
pp. 14-19 ◽  
Author(s):  
R. A. Babaev ◽  
Y. V. Kravtsov ◽  
T. V. Semenova

At the design stage of wastewater injection in oil/gas-condensate Yamal and Nadym-Purovskoye inter-fluve fields, one of the most important tasks is to forecast the absorption capacity of the aquifer. In connection with this a very important task is to estimate the permeability and porosity parameters of this horizon. In this paper an assessment of permeability and porosity parameters of absorption by three methods is proposed: pres-sure buildup curve, by the experimental cluster injections databy well logs.

Author(s):  
R.R. Haliulin ◽  
◽  
S.N. Zakirov ◽  
A.H. Kha ◽  
N.E. Vedernikov ◽  
...  

Author(s):  
R.R. Kantyukov ◽  
◽  
D.N. Zapevalov ◽  
R.K. Vagapov ◽  
◽  
...  

At many gas and gas condensate fields in operation, carbon dioxide (СО2) is present in the scope of the produced products, which, in combination with the natural and technological factors, stimulates intensive development of the internal corrosion processes in the pipelines and equipment. The relevance of the development of native regulatory documentation aimed at the assessment of the corrosion effects and development of the practical recommendations for protection against carbon dioxide corrosion in the last decade is due to the development of new gas fields in Russia with a high CO2 content (including on the Russian offshore), where there is a risk of local corrosion development with a high flow rate. The presence of CO2 in the produced gas in combination with the moisture and other factors stimulates the intensive development of corrosion processes and requires careful attention to the assessment of the corrosion aggressiveness of operating environments for selecting an efficient anti-corrosion protection. This is required to ensure reliable and safe operation of the equipment and pipelines made of carbon steel. Pipe low-alloy steel of 09G2S (09Mn2Si) grade, which is the most widely used at the domestic gas facilities, is not resistant to carbon dioxide corrosion. The experience of operating foreign deposits under conditions of carbon dioxide corrosion confirms the need and efficiency of considering this corrosion aspect at the facilities design stage. Incorrect assessment and underestimation of CO2 hazard in the produced hydrocarbons in relation to steel equipment and pipelines can lead to unaccounted corrosion risks (up to the facility shutdown), significant costs for the elimination of corrosion consequences (repairs, etc.), and the need to select and justify urgent corrective measures. Accounting the Russian and international experience allows to make a reasonable choice of rational technical solutions for efficient and safe operation of the deposits in conditions of carbon dioxide corrosion.


2020 ◽  
Author(s):  
Elena Meyer ◽  
Dmitry Bormashov ◽  
Vitaly Shkred ◽  
Mikhail Malofeev ◽  
Ivan Oparin ◽  
...  

2013 ◽  
Author(s):  
V.A. Grinchenko ◽  
D.A. Anuryev ◽  
A.V. Miroshnichenko ◽  
Y.I. Gordeev ◽  
A.N. Lazeev

Author(s):  
Y. Doreen Chin

An abnormity of temperature trend during cool down has been observed. During shut-in of insulated pipeline and riser systems that carry multiphase wellstream, the temperature at pipeline segments with large geometrical variations may decrease below the local ambient temperature. The low temperatures at these locations increase risk of hydrate formation during system cool-down. The cause of such abnormity may be explained by the mass transfer between gas-liquid interface, the phase re-allocation, and inner energy re-distribution due to the combined effects of gravitational and buoyancy forces. Pressure, mass flowrate, fluid compositions, flow orientation, and external and internal heat transfer during system cool-down are the key factors for the phase-redistribution between gas and liquid, and along the system. Susceptibility of a system for cool-down temperature abnormity should be assessed during design stage and operation procedures should be developed to manage it. An explanation of the governing mechanisms of this phenomenon is given in this paper, for a wide range of system parameters. The discussions are based on a series of theoretical and numerical studies of gas/condensate and oil/gas flows in subsea flowline and riser system after system shutdown.


Author(s):  
A.N. Dmitrievsky ◽  
A.G. Efimov ◽  
I.S. Gutman ◽  
N.A. Skibitskaya ◽  
N.A. Gafarov ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document