scholarly journals Effect of High Heat Treatment on the Viscosity of Model Milk Systems

1962 ◽  
Vol 45 (4) ◽  
pp. 481-485 ◽  
Author(s):  
G.A. Muck ◽  
J. Tobias
Keyword(s):  
1986 ◽  
Vol 53 (3) ◽  
pp. 391-406 ◽  
Author(s):  
John E. Ford ◽  
Monika J. A. Schröder ◽  
Michael A. Bland ◽  
Kim S. Blease ◽  
K. John Scott

SUMMARYFor milk from four herds of cows, maintained under different conditions of feeding and management, the natural Cu content and the stability of the ascorbate were highly correlated. Low Cu levels in milk from cows at pasture at farms A and B during the summer were associated with low storage losses of ascorbate. During this period, the milk of cows at farms C and D (on forage and Cu-supplemented concentrate) was richer in Cu, and losses of ascorbate were high. Heat treatment of the milk stabilized the ascorbate. Thus, in ‘high Cu’ milk (60 µg Cu/l), loss of ascorbate in the raw milk was 58% at 2 d, as against 17% after pasteurization at 72 °C and no loss after treatment at 82 °C. Storage of milk in light caused rapid destruction of ascorbate, equally with 72 and 82 °C heat treatments. The effects were examined of milk pasteurization temperature (72–82 °C) on flavour stability, bacteriological quality and vitamins of the B-complex. Heat treatment at 82 °C increased the susceptibility of vitamin B12 to destruction by light, but otherwise caused no greater losses of B-complex vitamins than did treatment at 72 °C. Taste panel ratings showed an initial preference for milk heated at 72 °C, but on storage of this milk in darkness the flavour score fell progressively and at 5 d it was judged ‘stale’. Treatment at 82 °C gave a faint ‘cooked’ flavour although, unlike that of the 72 °C-treated milk, the flavour remained stable throughout 14-d storage and after d 8 was increasingly preferred. On exposure to light after treatment at 72 °C milks rapidly acquired an unpleasant‘oxidized’ flavour, but after treatment at 82 °C, exposure to light had no such adverse effect on flavour during the early days of storage. Pasteurization at ∼ 80 °C offers a potential for improvement in the oxidative stability of milk and its contribution of vitamin C to the diet.


Author(s):  
M. M. Akhmedova ◽  
M. E. Akhmedov ◽  
A. F. Demirova ◽  
V. V. Pinyaskin

2020 ◽  
Vol 103 (12) ◽  
pp. 11178-11189
Author(s):  
Jing He ◽  
Ruxin Sun ◽  
Xiaoli Hao ◽  
Altantsatsral Battulga ◽  
Namuunaa Juramt ◽  
...  

2020 ◽  
Vol 10 (15) ◽  
pp. 5256-5266 ◽  
Author(s):  
Jihang Yu ◽  
Qiangsheng Guo ◽  
Xiuzhen Xiao ◽  
Haifang Mao ◽  
Dongsen Mao ◽  
...  

CuO/CeO2 catalysts with low CuO content and calcined at 800 °C exhibited better catalytic performance than those calcined at 500 °C. The coordinatively unsaturated copper atoms were proved to be the main active sites in the CuO/CeO2 catalysts.


2014 ◽  
Vol 893 ◽  
pp. 550-553
Author(s):  
Vithyacharan Retnasamy ◽  
Zaliman Sauli ◽  
They Yee Chin ◽  
Loh Sek Nee

Barium strontium titanate becomes famous among the microelectronic field due to its dielectric properties. Sol-gel method was used to prepare the Ba0.6Sr0.4TiO3and was deposited on SiO2substrate. The temperatures used in the heat treatment process were high temperature, 650°C. For high heat treatment temperature, the process was carried in 2 different times which were 15 min and 60min.The effect of the different temperature and time in the heat treatment process were analysed by using XRD. 650°C for 15 min and 60min, there are clearer peaks observed and the intensity of the 110 peak was sharper.


Author(s):  
Jia-Wei Tay ◽  
Devon James

With heat treatments to control drywood termites (Blattodea: Kalotermitidae), the presence of heat sinks, which have insulating properties, causes heat to be distributed unevenly throughout the treatment areas. Drywood termites may move to galleries in heat sink areas to avoid exposure to lethal temperatures. To mitigate heat sink effect, studies were conducted in Crytotermes brevis-infested homes in Honolulu, Hawaii to reflect real-world scenarios; either a standard heat treatment performed by a heat remediation company or improved heat treatment methods were used. For improved treatments, heated air was directed into the toe-kick voids of cabinets to reduce heat sink effects. Eight thermistor sensors were placed inside toe-kick voids, in the treatment zone, embedded inside cabinets or the sidewall, or in a wooden cube to monitor internal and ambient temperatures to ensure sufficiently high heat reached all areas. Target temperatures above 46 °C or 50 °C were recorded in all areas for 120 minutes. A pretreatment inspection was conducted, and follow-up inspections were performed at 6 months posttreatment to confirm termite inactivity using visual observations and a Termatrac device. In improved treatment homes, no termite activity was found after treatment. Efficacious heat treatment protocols for structures using the improved method are proposed.


Sign in / Sign up

Export Citation Format

Share Document