scholarly journals ADJUSTMENT OF FUZZY ADAPTIVE REGULATOR OF COMPRESSOR UNIT FOR LIQUEFACTION OF NATURAL GAS

2021 ◽  
Vol 295 (2) ◽  
pp. 187-192
Author(s):  
Mykhailo Vasyliev ◽  
◽  
Brunetkin Oleksandr ◽  
Keyword(s):  
Natural Gas ◽  
Automatic Control ◽  
Control Systems ◽  
Adaptive Controller ◽  
Compressor Unit ◽  
Automatic Control Systems ◽  
Natural Gas Liquefaction ◽  
Compressor Installation ◽  
Adaptive Regulator ◽  
Liquefaction Plant

The main properties of the object are studied, as well as the methods by which new parameters can be found for the regulator of the compressor unit for liquefaction of natural gas. The main properties of the adaptive regulator itself are studied, as well as the method by which the work was performed is developed. A comparison was also made with other types of automatic control systems that can be used in this facility. The sequence of construction of the adaptive controller and its interaction with the object is studied. The initial results of the adaptive controller and their comparison with other automatic control systems are investigated. The general properties and rules of construction of the adaptive regulator, the basic subtleties at work with it are studied. New possibilities for regulation of the compressor installation for liquefaction of natural gas are fully considered and the basic rules concerning application of this adaptive regulator are deduced. A study of the effectiveness of the adaptive regulator for this object was conducted and conclusions were made on the work of the regulator and the effectiveness of its results. A special sequence of work was also developed for the construction of an adaptive controller and its application on site. In general, the basic rules for working with such a regulator and its application in a natural gas liquefaction plant are derived. The behavior of the plant is investigated and new settings for the regulation of the natural gas liquefaction plant are derived. The main types of regulation of this object are applied and new rules for finding settings for the main regulator of the compressor unit are derived. The work on comparison of already traditional types of regulation with the adaptive regulator is made and conclusions on application of this or that type of regulation of compressor installation comparing results of regulation are made. The possibility of real use of this regulator on a constant basis in production is investigated, conclusions on the main work of the regulator and also shortcomings which can arise at a choice of regulation with the adaptive regulator are made.

scholarly journals REFINEMENT OF THE REDUCED CHARACTERISTICS OF CENTRIFUGAL BLOWERS IN THEIR ANALYTICAL FORM

2018 ◽  
pp. 94-100
Author(s):  
S. I. Perevoschikov
Keyword(s):  
Natural Gas ◽  
Automatic Control ◽  
Control Systems ◽  
Analytical Form ◽  
Technological Processes ◽  
Automatic Control Systems ◽  
Pipe Line

The article describes methods of simplified and refined correction of the reduced characteristics of centrifugal blowers of natural gas in their analytical form. The correction is carried out with the aim to improve the quality of the translation characteristics from the graphics view to the ana-lytic, where they can be used in automatic control systems of technological processes in gas pipe-line systems.

scholarly journals DEVELOPMENT OF A MATHEMATICAL MODEL OF A COMPRESSOR UNIT FOR NATURAL GAS LIQUEFACTION

2020 ◽  
Vol 11 (87) ◽  
Author(s):  
Mykhailo Vasyliev ◽  
◽  
Oleksandr Brunetkin ◽  
Keyword(s):  
Mathematical Model ◽  
Control System ◽  
Natural Gas ◽  
Automatic Control ◽  
Automatic Control System ◽  
Theoretical Research ◽  
The Future ◽  
Natural Gas Liquefaction ◽  
Compressor Installation ◽  
The Moment

First of all, such a topic as compressors for liquefaction of natural gas is unfortunately not very well studied. Therefore, this publication will present a detailed study of this object. First of all, the object itself will be considered, what it consists of, what its properties are, how natural gas liquefaction processes take place in it. So first you need to fully study the object itself, and only then proceed to build its mathematical model, which in the future can be used for more detailed analysis, first theoretically and then for practical purposes. This will achieve great results in the construction of an automatic control system for the compressor for liquefaction of natural gas. So, first the object itself will be studied, and only then, based on the acquired knowledge, we will build a mathematical model that will be needed in the future to develop an automatic control system. Of course, if you do not fully study all the properties of the object, such as the physical processes that take place there and the properties of the compressor. And having already put together all the available information, we can have a complete picture of this object. And from this information that has been collected, we can finally move on to the development of a more detailed mathematical model, which will be, albeit simplified, but still close to reality. Only then, already having this mathematical model, you can move on to a more detailed study in theory. And after conducting theoretical research, it is possible to check all the results of the study on a mathematical model, which will help to understand whether they are effective. Because it is more profitable to check theoretical information on a mathematical model than to do it on a real object. This can be costly, and in the case of an installation such as a natural gas liquefaction compressor, it is very expensive. And therefore this mathematical model will be appropriate. This model can be used in a more detailed study of this object because at the moment there is no holistic picture for the dagono object. It will also be possible to apply this model to find the necessary laws of regulation which will help to increase productivity of the compressor installation for liquefaction of natural gas. And this model will help to solve this question and to establish full-fledged work on studying of the given compressor installation.

COMPARISON OF CYBER CRIME AWARENESS AMONG SCIENCE AND SOCIAL SCIENCE PERSPECTIVE TEACHERS

2017 ◽  
Vol 4 (36) ◽  
Author(s):  
Anupam Bansal
Keyword(s):  
Social Science ◽  
Automatic Control ◽  
Control Systems ◽  
Child Pornography ◽  
Cyber Crime ◽  
Computer Data ◽  
Automatic Control Systems ◽  
Living Things ◽  
Wide Range

“Cyber crime” has been used to describe a wide range of offences, including offences against computer data and systems (such as “Hacking”), computer related forgery and fraud (such as “phishing”), content offences (such as disseminating child pornography), and copyright offences (such as the dissemination of pirated content). The word “Cyber Crime” has been derived from the words “Cybernetic” which means the science of communication and automatic control systems in both machines and living things.

Automatic Control Systems for Construction Machinery

1988 ◽  
Author(s):  
Makoto Kakuzen ◽  
Hirokazu Araya ◽  
Nobuo Kimura ◽  
Isao Sawamura
Keyword(s):  
Automatic Control ◽  
Control Systems ◽  
Construction Machinery ◽  
Automatic Control Systems
Sign in / Sign up

Export Citation Format

Share Document