Lowtemperature plasma generator for effective processing of materials

Low-temperature plasma is used in metallurgy for steel alloying by nitrogen, deoxidization of magnetic alloys, obtaining of steels with particularly low carbon content, metal cleaning of nonmetallic inclusions, desulfurization and other refining processes. The wide application of those technologies is restrained by absence of reliable generators of low-temperature plasma (GLP) with sufficient resource of continuous operation. As a result of studies, a universal generator of high-enthalpy plasma jet of various working gases was created. The generator has expanding channel of the output electrode with an efficiency of ~60 % for argon working gas and ~80% for nitrogen and air. It was shown that the developed generator of low-temperature plasma ensures formation of a weakly diverging (2α = 12°) plasma jet with a diameter D = 5–12 mm, an enthalpy of 5–50 kJ/g and a mass average temperature of 5–10 kK, at a full electric power of the arc discharge of 5–50 kW and a plasma-forming gas flow rate of 1–3 g/s. Results of the study of propane additions to the plasma-forming gas effect on the state of cathodes with inserts made of pure tungsten, lanthanum tungsten, and hafnium presented. It was shown that a small propane addition (1%) to the plasma-forming gas, results in reducing effect of the insert material. Study of the GLP operation at arc current 100A with addition to the working gas nitrogen maximum possible volume of propane, which don’t disturb stability of arc showed that for the developed plasma generator at the nitrogen flow rate ~0,45 g/s, the propane flow rate was ~0,33 g/s (not more than ~73 % of the plasma-forming gas). The created high-resource GLP with changeable electrodes enables to obtain at the exit a high-enthalpy plasma flow of various gases (argon, nitrogen, air) and can be a prototype of more powerful plasmotrons of various technological application, in particular for plasma metallurgy.