scholarly journals Possibility of Humid Municipal Wastes Hygienisation Using Gliding Arc Plasma Reactor

Water ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 194
Author(s):  
Joanna Pawłat ◽  
Piotr Terebun ◽  
Michał Kwiatkowski ◽  
Katarzyna Wolny-Koładka
Keyword(s):  
Low Temperature ◽  
Plasma Treatment ◽  
Alternative Fuels ◽  
Raw Materials ◽  
Arc Discharge ◽  
Plasma Reactor ◽  
Municipal Waste ◽  
Low Temperature Plasma ◽  
Temperature Plasma ◽  
Gliding Arc

Sterilization of municipal waste for a raw material for the production of refuse-derived fuel and to protect surface and ground waters against biological contamination during transfer and storage creates a lot of problems. This paper evaluates the antimicrobial potential of non-equilibrium plasma in relation to the selected groups of microorganisms found in humid waste. The proposed research is to determine whether mixed municipal waste used for the production of alternative fuels can be sterilized effectively using low-temperature plasma generated in a gliding arc discharge reactor in order to prevent water contamination and health risk for working staff. This work assesses whether plasma treatment of raw materials in several process variants effectively eliminates or reduces the number of selected groups of microorganisms living in mixed municipal waste. The presence of vegetative bacteria and endospores, mold fungi, actinobacteria Escherichia coli, and facultative pathogens, i.e., Staphylococcus spp., Salmonella spp., Shigella spp., Enterococcus faecalis and Clostridium perfringens in the tested material was microbiologically analyzed. It was found that the plasma treatment differently contributes to the elimination of various kinds of microorganisms in the analyzed raw materials. The effectiveness of sterilization depended mainly on the time of raw materials contact with low-temperature plasma. The results are very promising and require further research to optimize the proposed hygienization process.

Resource Saving Technology for Plasma Treatment of Molybdenum Ore Tailings

2014 ◽  
Vol 682 ◽  
pp. 515-518 ◽  
Author(s):  
Oleg G. Volokitin ◽  
Nelli K. Skripnikova ◽  
Valentin V. Shekhovtsov
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Plasma Treatment ◽  
Raw Materials ◽  
Silicate Melts ◽  
Low Temperature Plasma ◽  
Resource Saving ◽  
Temperature Plasma ◽  
Mineral Fibers

In the production of mineral fibers it is possible to synthesize high-temperature silicate melts from molybdenum ore tailings using low-temperature plasma. Physicochemical research was carried out in relation to raw materials and melt products.

Low Temperature Plasma Treatment of Living Human Cells

2007 ◽  
Vol 4 (S1) ◽  
pp. S465-S469 ◽  
Author(s):  
Stephanie Tümmel ◽  
Nina Mertens ◽  
Jiejun Wang ◽  
Wolfgang Viöl
Keyword(s):  
Low Temperature ◽  
Plasma Treatment ◽  
Human Cells ◽  
Low Temperature Plasma ◽  
Temperature Plasma

Ultra-fast framework stabilization of Ge-rich zeolites by low-temperature plasma treatment

2014 ◽  
Vol 5 (1) ◽  
pp. 68-80 ◽  
Author(s):  
Mohamad El-Roz ◽  
Louwanda Lakiss ◽  
Aurelie Vicente ◽  
Krassimir N. Bozhilov ◽  
Frederic Thibault-Starzyk ◽  
...  
Keyword(s):  
Low Temperature ◽  
Plasma Treatment ◽  
Low Temperature Plasma ◽  
Temperature Plasma

Investigation of the properties of knitted woolen fabrics treated with oxygen low-temperature plasma for sportswear applications

2021 ◽  
pp. 004051752110306
Author(s):  
Honglian Cong ◽  
Boyu Zhao ◽  
Hao Han ◽  
Xuliang Yu
Keyword(s):  
Low Temperature ◽  
Plasma Treatment ◽  
Moisture Absorption ◽  
Mapping Method ◽  
Function Evaluation ◽  
Low Temperature Plasma ◽  
Temperature Plasma ◽  
Wool Fibers ◽  
Before And After ◽  
Concentration Mapping

Nine groups of knitted woolen fabrics for sportswear with different technical characteristics were treated with oxygen low-temperature plasma, and the changes in the surface morphology and chemical composition of wool fibers before and after plasma treatment, as well as the changes in the applicability indexes of knitted woolen fabrics, were studied. Finally, the comfort performance of the fabrics was evaluated by combining the concentration mapping method and the function evaluation value method. The analysis found that the surface scales of wool fibers were seriously etched after oxygen low-temperature plasma treatment, and the anti-felting, bursting strength and moisture absorption of the knitted woolen fabrics were improved. At the same time, the quick-drying index of the fabric has also been improved to a certain extent. This research provides a basis for the development of knitted woolen fabric for sportswear with excellent performance.

Lowtemperature plasma generator for effective processing of materials

2021 ◽  
Vol 77 (5) ◽  
pp. 587-592
Author(s):  
M. Kh. Gadzhiev ◽  
A. S. Tyuftyaev ◽  
Yu. M. Kulikov ◽  
M. A. Sargsyan ◽  
D. I. Yusupov ◽  
...  
Keyword(s):  
Low Temperature ◽  
Flow Rate ◽  
Gas Flow ◽  
Arc Discharge ◽  
Plasma Jet ◽  
Plasma Generator ◽  
Low Temperature Plasma ◽  
Temperature Plasma ◽  
High Enthalpy ◽  
High Resource

Low-temperature plasma is used in metallurgy for steel alloying by nitrogen, deoxidization of magnetic alloys, obtaining of steels with particularly low carbon content, metal cleaning of nonmetallic inclusions, desulfurization and other refining processes. The wide application of those technologies is restrained by absence of reliable generators of low-temperature plasma (GLP) with sufficient resource of continuous operation. As a result of studies, a universal generator of high-enthalpy plasma jet of various working gases was created. The generator has expanding channel of the output electrode with an efficiency of ~60 % for argon working gas and ~80% for nitrogen and air. It was shown that the developed generator of low-temperature plasma ensures formation of a weakly diverging (2α = 12°) plasma jet with a diameter D = 5–12 mm, an enthalpy of 5–50 kJ/g and a mass average temperature of 5–10 kK, at a full electric power of the arc discharge of 5–50 kW and a plasma-forming gas flow rate of 1–3 g/s. Results of the study of propane additions to the plasma-forming gas effect on the state of cathodes with inserts made of pure tungsten, lanthanum tungsten, and hafnium presented. It was shown that a small propane addition (1%) to the plasma-forming gas, results in reducing effect of the insert material. Study of the GLP operation at arc current 100A with addition to the working gas nitrogen maximum possible volume of propane, which don’t disturb stability of arc showed that for the developed plasma generator at the nitrogen flow rate ~0,45 g/s, the propane flow rate was ~0,33 g/s (not more than ~73 % of the plasma-forming gas). The created high-resource GLP with changeable electrodes enables to obtain at the exit a high-enthalpy plasma flow of various gases (argon, nitrogen, air) and can be a prototype of more powerful plasmotrons of various technological application, in particular for plasma metallurgy.

Sign in / Sign up

Export Citation Format

Share Document