scholarly journals Watermelon Production Budget for North Florida

EDIS ◽  
2021 ◽  
Vol 2021 (6) ◽  
Author(s):  
Kevin Athearn ◽  
Marina Burani Arouca ◽  
Robert C. Hochmuth ◽  
Josh H. Freeman ◽  
Nicholas Dufault ◽  
...  
Keyword(s):  
Spring Season ◽  
Equipment Operation ◽  
Fixed Assets

This publication describes a sample watermelon production budget for a spring season in north Florida. We estimate costs for fixed assets, equipment operation, labor, materials, services, harvesting and marketing. We also estimate yield and potential returns. A budget summary and sensitivity table are provided. A spreadsheet that can serve as a budget template accompanies the manuscript.

Simulation of vibration piercing of pipe blank at press

2020 ◽  
Vol 76 (11) ◽  
pp. 1128-1138
Author(s):  
S. R. Rakhmanov
Keyword(s):  
High Frequency ◽  
Deformation Zone ◽  
Pipe Blank ◽  
Equipment Operation ◽  
Metal Deformation ◽  
Technological Tool ◽  
High Frequency Vibrations ◽  
Pipe Blanks ◽  
Wave Phenomena

In some cases, the processes of piercing or expanding pipe blanks involve the use of high-frequency active vibrations. However, due to insufficient knowledge, these processes are not widely used in the practice of seamless pipes production. In particular, the problems of increasing the efficiency of the processes of piercing or expanding a pipe blank at a piercing press using high-frequency vibrations are being solved without proper research and, as a rule, by experiments. The elaboration of modern technological processes for the production of seamless pipes using high-frequency vibrations is directly related to the choice of rational modes of metal deformation and the prediction resistance indicators of technological tools and the reliability of equipment operation. The creation of a mathematical model of the process of vibrating piercing (expansion) of an axisymmetric pipe blank at a piercing press of a pipe press facility is an actual task. A calculation scheme for the process of piercing a pipe plank has been elaborated. A dependence was obtained characterizing the speed of front of plastic deformation propagation on the speed of penetration of a vibrated axisymmetric mandrel into the pipe workpiece being pierced. The dynamic characteristics of the occurrence of wave phenomena in the metal being pierced under the influence of a vibrated tool have been determined, which significantly complements the previously known ideas about the stress-strain state of the metal in the deformation zone. The deformation fields in the zones of the disturbed region of the deformation zone were established, taking into account the high-frequency vibrations of the technological tool. It has been established that the choice of rational parameters (amplitude-frequency characteristics) of the vibration piercing process of a pipe blank results in significant increase in the efficiency of the process, the durability of the technological tool and the quality of the pierced blanks.

Operation intensification methods of aggressive industrial sewage neutralization facilities

2020 ◽  
Vol 76 (11) ◽  
pp. 1149-1153
Author(s):  
N. S. Tsarev ◽  
V. I. Aksenov ◽  
I. I. Nichkova
Keyword(s):  
Cold Water ◽  
Specific Productivity ◽  
Technological Properties ◽  
Technological Parameters ◽  
Preliminary Heating ◽  
Sediment Treatment ◽  
Circulating Water ◽  
Equipment Operation ◽  
Sediment Volume ◽  
Industrial Sewage

To neutralize the waste pickling solutions and rinsing water, resulting from cleaning metal products s surface of rust by acids solutions, lime is used. Being cheap, this method of sewage neutralization has considerable drawbacks. Forming in the technological pipes strong gypsum depositions and low specific productivity of the equipment for sediment dewatering are most significant of them. Characteristic of aggressive industrial sewage, formed at pickling of ferrous metals presented. Methods of elimination of drawbacks of industrial sewage neutralization by lime considered, including stabilization of neutralized industrial sewage and control of properties of the sediment formed. It was noted, that stability of the circulating water can be provided by accelerating of crystallization of the forming gypsum sediments by introducing in it fine priming powder and heating the neutralized water up to 65-70 °С followed by thermal softening of a part of circulating water, removed out of the circulating system. It was shown, that the heating of the water and the ongoing changes of the composition and properties of the sediment result in decrease of filtration resistance 2-3 folds, increase of deposition speed 3-4 folds and decrease the sediment volume 1.5-2 folds comparing with lime neutralization in cold water. Calculated dozes of lime at the heating were taken the same as at the regular lime neutralization. Elimination of the circulating water oversaturation by bi-water gypsum can be reached also by addition into the water of powder-like gypsum pulp - priming powder for microcrystals of the gypsum, followed by aeration during 30-40 min. This method was tested under industrial conditions. Technological properties of the forming sediment can be improved by sediment treatment by flocculants and preliminary heating of the neutralized water up to 65-70 °С. Control of technological properties of the sediment is done by addition of flocculants and heating of the neutralized water. Recommendations for improving operation of the neutralization facilities presented with indicating particular technological parameters of the equipment operation for sewage and sediment treatment. 

The Severity of Internal Controls over Financial Reporting Deficiencies: Differences among Types and Industries

2014 ◽  
pp. 55-77
Author(s):  
Tatiana Mazza ◽  
Stefano Azzali
Keyword(s):  
Information Technology ◽  
Financial Reporting ◽  
Internal Control ◽  
Service Industry ◽  
Listed Companies ◽  
Internal Controls ◽  
Service Companies ◽  
Finance Industry ◽  
Material Weaknesses ◽  
Fixed Assets

This study analyzes the severity of Internal Control over Financial Reporting deficiencies (Deficiencies, Significant Deficiencies and Material Weaknesses) in a sample of Italian listed companies, in the period 2007- 2012. Using proprietary data the severity of the deficiencies is tested for account-specific, entity level and information technology controls and for industries (manufacturing and services vs finance industries). The results on ICD severity is compared with one of the most frequent ICD (Acc_Period End/Accounting Policies): for account-specific, ICD in revenues, purchase, fixed assets and intangible, loans and insurance are more severe while ICD in Inventory are less severe. Differences in ICD severity have been found in the characteristic account: ICD in loan and insurance for finance industry and ICD in revenue, purchase for manufacturing and service industry are more severe. Finally, we found that ICD in entity level and information technology controls are less severe than account specific ICD in all industries. However, the results on entity level and information technology deficiencies could also mean that the importance of these types of control are under-evaluated by the manufacturing and service companies.

ESTIMATION OF ABOVE GROUND BIOMASS OF THE THREE SITES (GRAZED SITE, PROTECTED SITE AND SEED SOWN SITE) FOR COMPARING THEIR PRODUCTIVITY IN KASHMIR VALLEY

2017 ◽  
Vol 23 (2) ◽  
Author(s):  
AFSHAN ANJUM BABA ◽  
SYED NASEEM UL-ZAFAR GEELANI ◽  
ISHRAT SALEEM ◽  
MOHIT HUSAIN ◽  
PERVEZ AHMAD KHAN ◽  
...  
Keyword(s):  
Protected Areas ◽  
Aboveground Biomass ◽  
Plant Biomass ◽  
Summer Season ◽  
Above Ground Biomass ◽  
Spring Season ◽  
Kashmir Valley ◽  
Ground Biomass ◽  
Maximum Value ◽  
Protected Site

The plant biomass for protected areas was maximum in summer (1221.56 g/m2) and minimum in winter (290.62 g/m2) as against grazed areas having maximum value 590.81 g/m2 in autumn and minimum 183.75 g/m2 in winter. Study revealed that at Protected site (Kanidajan) the above ground biomass ranged was from a minimum (1.11 t ha-1) in the spring season to a maximum (4.58 t ha-1) in the summer season while at Grazed site (Yousmarag), the aboveground biomass varied from a minimum (0.54 t ha-1) in the spring season to a maximum of 1.48 t ha-1 in summer seasonandat Seed sown site (Badipora), the lowest value of aboveground biomass obtained was 4.46 t ha-1 in spring while as the highest (7.98 t ha-1) was obtained in summer.

ESTIMATION OF CONSUMPTIVE USE OF POTATO CROP PIANTED UNDER DRIP IRRIGATION SYSTEM BY USING SWRT TECHNOLOGY

2020 ◽  
Vol 10 (1) ◽  
pp. 271-282
Author(s):  
J.N. Abedalrahman ◽  
R.J. Mansor ◽  
D.R. Abass
Keyword(s):  
Water Consumption ◽  
Drip Irrigation ◽  
Soil Depth ◽  
Irrigation System ◽  
Potato Crop ◽  
Block Design ◽  
Organic Fertilizer ◽  
Control Treatment ◽  
Drip Irrigation System ◽  
Spring Season

A field experiment was carried out in the field of the College of Agriculture / University of Wasit, located on longitude  45o   50o   33.5o   East and latitude 32o 29o 49.8o North, in Spring season of the agricultural season 2019, in order to estimate the water consumption of potato crop using SWRT technology and under the drip irrigation system. The experiment was designed according to Randomized Complete Block Design (RCBD) with three replications and four treatments that include of the SWRT treatment (the use of plastic films under the plant root area in an engineering style), and the treatment of vegetal fertilizer (using Petmos), organic fertilizer (sheep manure), and the control treatment . Potato tubers (Solanum tuberosum L.)  var. Burin was planted for spring season on 10/2/2019 at the soil depth of 5-10 cm. The highest reference water consumption for the potato crop during the season was calculated by Najeeb Kharufa, which was 663.03 mm. The highest actual water consumption for the potato crop during the season for the control treatment was 410.1 mm. The results showed increase in the values of the crop coefficient (Kc) in the stages of tubers formation and tubers filling stage as compared to the vegetative and ripening stages, ranged from 1.37-1.92 for the two stages of tubers formation and tubers filling. The SWRT treatment gave the highest water use efficiency during the season, was 3.46 kg m-3 .

DISTRIBUIÇÃO DA EVAPORAÇÃO EM ESTUFA PLÁSTICA NA PRIMAVERA

Irriga ◽  
2001 ◽  
Vol 6 (3) ◽  
pp. 120-127
Author(s):  
Reginaldo Ferreira Santos ◽  
Antonio Evaldo Klar
Keyword(s):  
Spatial Variability ◽  
Pan Evaporation ◽  
Spring Season ◽  
Class A ◽  
Agricultural Sciences ◽  
E Mail ◽  
Center Area ◽  
Class A Pan

DISTRIBUIÇÃO DA EVAPORAÇÃO EM ESTUFA PLÁSTICA NA PRIMAVERA  Reginaldo Ferreira SantosCentro de Ciências Exatas e Tecnológica da UNIOESTE- CP 711CEP 858114-110, Cascavel, PR - Fone: 0XX45 2203155.  E-mail: [email protected] Evaldo KlarDepartamento de Engenharia Rural - Faculdade de Ciências Agronômica- UNESP - CEP 18603-970 - Botucatu, SP. CP: 237.  E-mail:  [email protected]  1  RESUMO O presente trabalho teve como objetivo avaliar a distribuição da evaporação no interior de uma estufa plástica, com uma cultura de pimentão, através da variabilidade espacial e comparar a evaporação dos microevaporímetros com os valores do Tanque classe "A". O experimento foi conduzido no Campus da Universidade Estadual Paulista - FCA/UNESP, no período de primavera, em estufa plástica de polietileno de baixa densidade (PEBD). Na distribuição da evaporação em estufa com orientação norte/sul, verificou-se que as maiores evaporações ocorreram nas extremidades sul e norte tendente ao lado oeste. Já as menores evaporações localizaram-se no centro. No período de primavera, a evaporação média nos microevaporímetros superestimou em 55% a evaporação determinada no Tanque classe "A". UNITERMOS: evaporação, geoestatística, estufa.  SANTOS, R.F, KLAR, A.E.  EVAPORATION DISTRIBUTION INSIDE A PLASTIC TUNNEL IN THE SPRING SEASON  2  ABSTRACT                 The main aim of this study was to verify the evaporation distribution inside a plastic tunnel, with pepper crop, oriented to north/south, through spatial variability and to compare Class A Pan evaporation to punctual evaporations of 40 equidistant microevaporimeters placed from 50cm the soil. The study was carried out at the College of Agricultural Sciences/UNESP, Botucatu – SP in the spring season.  The highest evaporation occurred next to north and to south sides of the tunnel, with tendency to west. Consequently, the lowest evaporations occurred at the center area. The microevaporimeter evaporations were 55% higher than those obtained from Class A Pan. KEYWORDS: evaporation distribution, microevaporimeter.

Sign in / Sign up

Export Citation Format

Share Document