scholarly journals JENIS DAN SEBARAN SEDIMEN DI PERAIRAN PAPELA DAN SEKITARNYA, ROTE-NDAO, NUSA TENGGARA TIMUR

2016 ◽  
Vol 13 (3) ◽  
pp. 153
Author(s):  
Deny Setiady ◽  
Udaya Kamiludin ◽  
Nienu Yayu Gerhaneu

Daerah Penelitian terletak di perairan Papela dan sekitarnya yang merupakan bagian dari Selat Rote yang secara administratif merupakan wilayah dari Kabupaten Rote-Ndao, Provinsi Nusa Tenggara Timur. Di daerah penelitian pada 40 lokasi telah dilakukan pengambilan sedimen dasar laut dengan pemercontoh comot, deskripsi megaskopis dan analisis besar butir. Penelitian bertujuan untuk mengetahui jenis sedimen, sebaran sedimen dan lingkungan pengendapannya. Berdasarkan hasil analisis besar butir nomenklatur sedimen di daerah penelitian dijumpai 4 jenis sedimen yaitu: kerikil, pasir, pasir lanauan, lanau pasiran dan lanau. Sebaran kerikil terdapat di dua tempat, yaitu di utara dan selatan tepian daerah penelitian.Sebaran pasir mencapai kurang lebih 30 % dari luas perairan penelitian, pasir lanauan menutupi kurang 5 % dari luas perairan penelitian, lanau pasiran mempunyai sebaran kurang lebih 30 % dari luas perairan daerah penelitian dan sebaran lanau terdapat di muka muara sungai bagian dalam Teluk Papela dengan tutupan kurang lebih 5 % dari luas perairan penelitian.Kata kunci Sedimen permukaan dasar laut, analisis besar butir, sebaran sedimen, perairan Papela The study area is located in Papela waters area and that is part of the Rote Strait, administratively is a region of Rote-Ndao regency, East Nusa Tenggara Province. The method of research conducted is sampling seafloor sediments, megaskopis description and analysis of the grain size. The study area is located in Papela waters area and that is part of the Rote Strait, administratively is a region of Rote-Ndao regency, East Nusa Tenggara Province. The method of research conducted is sampling seafloor sediments, megaskopis description and analysis of the grain size. The purpose of research is the grain size analysis of seabed surface sediment to determine the type of sediment, sediment distribution and depositional environment. Based on nomenklature sediment grain size analysis result in the study area was found four types of sediments , there are: gravelly, sand, silty sand, sandy silt and silt Distribution of gravel found in two places, namely on the north and south banks of the study area. Distribution of sand reaches approximately 30% of the water area of research, silty sand covering approximately 5% of the water area of research, sandy silt has spread approximately 30% of the total water area of research and distribution of silt contained in the inner face of the Gulf estuaries Papela with cover approximately 5% of the water area of research. Keywords: Surficial sediment, grain size analysis, sediment distribution, Papela Waters

2019 ◽  
Vol 16 (2) ◽  
Author(s):  
Deny Setiady ◽  
Udaya Kamiludin ◽  
Ildrem Syafri

Daerah penelitian terletak di perairan antara Pulau Batam dan Pulau Bintan (Selat Riau), termasuk ke dalam wilayah Kotamadya Batam dan Kabupaten Bintan, Provinsi Kepulauan Riau. Metode penelitian yang dilakukan adalah pengambilan posisi (navigasi), pengukuran kedalaman dasar laut, pengamatan dan pengambilan contoh sedimen pantai, pengambilan contoh sedimen dasar laut, serta analisis laboratorium. Tujuan penelitian adalah untuk mengetahui sebaran pasir pasir laut, serta ketebalannya berdasarkan karakteristik ukuran butirannya, agar potensi bahan galian tersebut dapat diketahui. Berdasarkan analisis ukuran butir sedimen di pantai Pulau Batam dan Pulau Bintan diketahui berukuran pasir, kerikil pasiran, pasir kerikilan dan lanau pasiran, sedangkan sebaran sedimen dasar laut terdiri dari: kerikil pasiran, pasir kerikilan, pasir, pasir lanauan dan lanau pasiran. Kedalaman sedimen pasir di pantai Pulau Batam antara 1 meter sampai 2,6 meter, sedangkan ketebalan sedimen pasir di Pulau Bintan antara 0,6 meter sampai 2 meter. Kata Kunci: sedimen, ukuran butir, pasir, bahan galian, Selat RiauThe study area is located in offshore area between Batam and Bintan Islands (Riau Strait), including of Batam and Bintan regency, Kepulauan Riau Province. The research methods carried out were position taking (navigation), depth of seabed measurement (bathymetry), observation and coastal sediments sampling, seabed sediments sampling, and laboratory analysis. The objectives of the study is to know the sand beach and sea sand distribution and its thickness based on characteristics of grain size, as well as to know those construction materials. Based on sediment grain size analysis on the Batam and Bintan islands, sand beach consists of: sand, sandy gravel, gravelly sand and sandy silt, while seafloor surficial sediments distribution consist of sandy gravel, gravelly sand, sand, silty sand and sandy silt. The depth of sand sediment on Batam beach is between 1 to 2.6 meters, while the depth of sand sediment in Bintan Island coastal is between 0.6 meters to 2 meters. Keywords: sediment, grain size, sands, substrate material, Riau Strait


2016 ◽  
Vol 5 (1) ◽  
Author(s):  
Deny Setiady ◽  
Asep Permana

Berdasarkan hasil analisis besar butir sebanyak 36 percontoh sedimen permukaan dasar laut di Perairan Cirebon, didapatkan 4 jenis sedimen: lanau, lanau pasiran, pasir lanauan dan pasir. Sedimen lanau, lanau pasiran, dan pasir, tersebar di lepas pantai Cirebon dan muara Sungai Kalijaga, sedangkan pasir lanauan di muara sungai Sukalila. Dari Peta Batimetri terlihat daerah dangkal di sekitar muara Sungai Kalijaga. Sedimen paling tebal terdapat di sekitar muara Sungai Kalijaga dan Sungai Sukalila. Sedimen tersebut tersebar ke arah lepas pantai dan ke daerah rencana lokasi pelabuhan. Di muara Sungai Kalijaga sedimennya berupa pasir. Berdasarkan plot pada grafik antara ukuran besar butir terhadap persen frekuensi, didapatkan hasil sedimen dengan persen frekuensi yang tinggi antara 2.25 phi - 2.75 phi atau pasir sedang sampai pasir halus. Berdasarkan grafik frekuensi kumulatif terhadap besar butir terdapat 2 cara transpor yaitu traksi untuk butiran pasir sedang dan saltasi untuk kisaran butiran lanau sampai pasir halus. Kata Kunci : S. Kalijaga, S. Sukalila, Cirebon, besar butir, sedimen Based on grain size analysis of 36 seafloor surficial sediment samples from Cirebon Water; there are 4 types of sediments silt, sandy silt, silty sand and sand. Silt, sandy silt and sand are distributed offshore of Cirebon and in the river mouth of Kalijaga, while silty sand is in the river mouth of Sukalila. From the bathymetric map the shallow water can be observed in Kalijaga river mouth. The thicker sediments are found in Kalijaga mouth and Sukalila river. These sediments have been transported to the offshore and to the proposed Harbour location. Sediment in Kalijaga river mouth is sand. Based on graphic presentation between grain size and percent frequencies, it indicates that the percentage of higher frequencies ranges between 2.25 TO 2.75 phi. Based on the cumulative frequency to grain size graphic, there are two transport modes: traction for medium size sand and saltation for grain size range silt to fine sand. Keywords : Kalijaga River, Sukalila River, Cirebon, grain size, sediment


2017 ◽  
Vol 50 (1) ◽  
pp. 334 ◽  
Author(s):  
A.P. Karageorgis ◽  
Chr. Ioakim ◽  
G. Rousakis ◽  
D. Sakellariou ◽  
G. Vougioukalakis ◽  
...  

An extensive oceanographic survey was conducted in the marine area between Kimolos and Sifnos Islands, a rather poorly-studied sector of the Aegean Sea, in order to gain better understanding of submarine geomorphological features and associated sediment provenance. Multi-beam bathymetry and surface sediment sampling with a box corer were carried out on board R/V Aegaeo, followed by grain-size analysis, XRD and XRF measurements. A large circular depression was identified north of Kimolos reaching a water depth of 743 m, filled with fine grained sediments. Surface sediment distribution is characterized by gradual decrease in grain-size from silty sand to silt in a S-N direction. The mineralogical composition comprises calcite, Mgcalcite, aragonite, dolomite, quartz, K feldspars, plagioclase, amphiboles and clay minerals. Major sediment provinces identified were: (i) the shallow sector proximal to Kimolos, characterized by higher contents in Si, Al, K, Rb and Ba; (ii) the deep area west of Sifnos, including the large depression, characterized by higher contents in Fe, Ti, Na, Mg, S, Cr, Cu, Ni, V, Zn; and (iii) the south passage between Kimolos and Sifnos, which exhibits higher Ca, S, and Sr contents. Manganese enrichment was observed in and around the bathymetric depression, where Mn oxides act efficiently as scavengers of a suite of metals.


2021 ◽  
Vol 11 (6) ◽  
pp. 2799
Author(s):  
Yanping Chen ◽  
Wenzhe Lyu ◽  
Tengfei Fu ◽  
Yan Li ◽  
Liang Yi

The Huanghe River (Yellow River) is the most sediment laden river system in the world, and many efforts have been conducted to understand modern deltaic evolution in response to anthropological impacts. However, the natural background and its linkage to climatic changes are less documented in previous studies. In this work, we studied the sediments of core YDZ–3 and marine surface samples by grain-size analysis to retrieve Holocene dynamics of the Huanghe River delta in detail. The main findings are as follows: The mean value of sediment grain size of the studied core is 5.5 ± 0.9 Φ, and silt and sand contents are 5.2 ± 2.3% and 8.2 ± 5.3%, respectively, while the variance of clay particles is relatively large with an average value of 86.4 ± 8.5%. All grain-size data can be mathematically partitioned by a Weibull-based function formula, and three subgroups were identified with modal sizes of 61.1 ± 28.9 μm, 30.0 ± 23.9 μm, and 2.8 ± 1.6 μm, respectively. There are eight intervals with abrupt changes in modal size of core YDZ–3, which can be correlated to paleo-superlobe migration of the Huanghe River in the Holocene. Based on these observations, the presence of seven superlobes in the history are confirmed for the first time and their ages are well constrained in this study, including Paleo-Superlobes Lijin (6400–5280 yr BP), Huanghua (4480–4190 yr BP), Jugezhuang (3880–3660 yr BP), Shajinzi (3070–2870 yr BP), Nigu (2780–2360 yr BP), Qikou (2140–2000 yr BP), and Kenli (1940–1780 and 1700–1650 yr BP). By tuning geomorphological events to a sedimentary proxy derived from core YDZ–3 and comparing to various paleoenvironmental changes, we proposed that winter climate dominated Holocene shifts of the Huanghe River delta on millennial timescales, while summer monsoons controlled deltaic evolution on centennial timescales.


2017 ◽  
Vol 2 (3) ◽  
pp. 49
Author(s):  
Purna Sulastya Putra ◽  
Septriono Hari Nugroho

<strong>Subsurface sediment distribution in the Sumba Waters, East Nusa Tenggara.</strong> Marine geological survey of the Ekspedisi Widya Nusantara 2016 was conducted in the Sumba Waters on 4 to 26 August 2016 using  Baruna Jaya VIII research vessel. The aim of this survey was to reveal the type and characteristics of the subsurface sediments of the Sumba Waters. A total of 13 samples were taken from the different depth in the subsurface bottom of the sea using grabbing methode with box corer. Grain size analysis were conducted using Mastersizer 2000 to understand the characteristics and the sediment type distribution. In general, the type of the subsurface sediment in the Sumba Waters is ranging from medium to very coarse sandy silt. Distribution of the subsurface sediments is correlated to depths. Grain size of the sediments in the Sumba Strait is coarser than in the western and southern of Sumba Island that directly connected to the Indian Ocean. Distribution of the subsurface sediment showing that the sediment, which are distributed further away from the coast is poorly sorted. The deposition of the subsurface-sea sediment is interpreted to represent a calm, and slow sedimentation mechanism under uniform suspension process.


2021 ◽  
Vol 9 ◽  
Author(s):  
Liang Chen ◽  
Hancheng Ji ◽  
Nansheng Qiu ◽  
Liang Zhang

The grain sizes of clastic rock sediments serve as important depositional indicators that are significant in sedimentology and petroleum geology studies. Generally, gamma ray, spontaneous-potential and resistivity well logs are utilized to qualitatively characterize variations in sediment grain size and determine the lithology in clastic reservoirs. However, grain size analysis of modern sedimentary samples collected from active rivers and deltas indicates that the percentage of fine depositional component has a logarithmic relationship with the average grain size in delta and river systems. Using the linear relationship to process the lithology interpretation, siltstones or mudstone is likely to be interpreted as sandstone. Therefore, a logarithmic conversion formula was built up between the gamma ray logs and measured grain size for the second member of the Xujiahe Formation of Anyue Area in the Sichuan Basin. Using the formula, the average grain size and lithology of the exploration wells were determined for the interest intervals. Furthermore, the calculated grain size gives a better understanding of the controlling factors of hydrocarbon-bearing reservoirs in the study area.


2020 ◽  
Author(s):  
Faith A. Renner ◽  
◽  
E. Christa Farmer ◽  
Moread Achek ◽  
Brandon Buchbinder ◽  
...  

2016 ◽  
Vol 2 (1) ◽  
pp. 71-88
Author(s):  
Ngavif Ardani ◽  
Saroso Saroso ◽  
Kamija Kamija ◽  
Khoirol Imam Fatoni

Keselamatan pelayaran adalah suatu keadaan terpenuhinya persyaratan keselamatan dan keamanan yang menyangkut aktivitas angkutan pada alur pelayaran dan di pelabuhan. Salah satu kendala yang dihadapi untuk mendukung terlaksananya kegiatan di pelabuhan dengan aman adalah terjadinya pendangkalan kolam. Laju sedimentasi yang cepat merupakan kendala bagi kelancaran operasional pelabuhan Banjarmasin dan alur pelayarannya. Penting dilakukan kajian untuk mengetahui karakteristik proses sedimentasi yang terjadi. Karakter sedimen laut dapat diidentifikasi dengan ukuran butir sedimen, komposisi sedimen, mekanisme transportasi, dan lingkungan pengendapan. Ukuran butir adalah sifat-sifat yang sangat fundamental dari partikel sedimen, mempengaruhi pengangkatan (entrainment), transport dan pengendapan sedimen. Analisa ukuran butir sedimen memberikan kunci penting bagi asal-usul sedimen, sejarah transportasi, dan kondisi pengendapan. Analisa ukuran butir sedimen memberikan gambaran tentang sifat-sifat fisik sedimen yang berkaitan dengan kemungkinan pemanfaatannya untuk berbagai keperluan. Adapun untuk pengolahan sedimen layang dapat dilakukan dengan metode penyaringan (filtering) dan sedimen terendap dengan metode kering sampai dengan mendapatkan hasil jenis sedimen dan analisis ukuran butir (Grain Size Analysis). Hasil pengolahan sedimen tersebut didapatkan nilai rata-rata kandungan sedimen layang pada daerah survei adalah 0,0309 gram/liter dan berdasarkan ukuran rata-rata dari ukuran partikel sedimen yang mendominasi adalah fraksi pasir dengan jenis Silty Sand. Berdasarkan nilai Sortasi, terlihat bahwa partikel sedimen pada umumnya terpisah dengan buruk dengan klasifikasi Poorly Sorted. Dilihat dari nilai kurtosisnya didominasi jenis leptokurtic. Selanjutnya dari nilai Skewness dominan bernilai negatif, hal ini dapat menggambarkan bahwa kecendrungan partikel kasar.


Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Qiao Su ◽  
Yanhui Zhu ◽  
Yalin Jia ◽  
Ping Li ◽  
Fang Hu ◽  
...  

During the last several decades, researchers have made significant advances in sedimentary environment interpretation of grain-size analysis, but these improvements have often depended on the subjective experience of the researcher and were usually combined with other methods. Currently, researchers have been using a larger number of data mining and knowledge discovering methods to explore the potential relationships in sediment grain-size analysis. In this paper, we will apply bipartite graph theory to construct a Sample/Grain-Size network model and then construct a Sample network model projected from this bipartite network. Furthermore, we will use the Mini Batch K-means algorithm with the most appropriate parameters (reassignment ratio ϵ=0.025 and mini batch = 25) to cluster the sediment samples. We will use four representative evaluation indices to verify the precision of the clustering result. Simulation results demonstrate that this algorithm can divide the Sample network into three sedimentary categorical clusters: marine, fluvial, and lacustrine. According to the results of previous studies obtained from a variety of indices, the precision of experimental results about sediment grain-size category is up to 0.92254367, a fact which shows that this method of analyzing sedimentary environment by grain size is extremely effective and accurate.


Sign in / Sign up

Export Citation Format

Share Document