scholarly journals Sistem Keamanan Ruangan Dengan Perekaman Visual Berbasis Radio Frekuensi Identification Dan Pre Hypertext Processor (PHP) di Loka Monitor Spektrum Frekuensi Radio

2013 ◽  
Vol 2 (2) ◽  
pp. 47
Author(s):  
Yurindra Yurindra ◽  
Agusta Dirga Saputra

The purpose of the thesis was to produce concrete results in providing security to the agencies that require special security. The method used in the manufacture of home lighting control devices based microcontroller using android smartphone is a prototype. This research method consists of several stages, library research, analytical methods, design methods, and implementation. The results achieved are ketenanagan perceived by the security agencies in masaah increased after he made these security systems. Where this tool uses a layered security system using Radio Frequency Identification (RFID) integrated with any database access. The results of testing this tool ebrhasil well where the user can sign in using RFID card and the user is not registered will be blocked and taken kgambar as evidence.

Technologic ◽  
2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Manase Sahat H Simarangkir ◽  
Agung Suryanto

Abstract--A manual door security system that has many shortcomings including difficulty opening locks when used, easily broken and keys that tend to be duplicated thereby reducing convenience and security. To prevent this, a good and easy-to-use room security system is needed. At this time began to develop an electronic room safety system using RFID technology (Radio-Frequency Identification) to improve the security system at the door of the house. In this study discusses the design and prototype of an automatic room door lock using an RFID system. The research method used is research and development. This Automatic Door is programmed by the Arduino application by creating a security system using Radio Frequency Identification (RFID) as a radio wave of data carrier frequencies that will be received by the receiver. The results of this study are the creation of an automatic home door security system using RFID which has a better level of security compared to manual security, so that it can cope with acts of theft in homes that are often abandoned by residents. In addition, the use of RFID can also minimize the overall lock on the house, so that every family member needs only one tag card / key to open all the locks on the door in the house. Keywords: Arduino Uno, RFID, Servo Motor, Solenoi Abstrak--Sistem pengamanan pintu rumah yang bersifat manual memiliki banyak kekurangan diantaranya sulit membuka kunci ketika digunakan, mudah dibobol dan kunci yang cenderung dapat diduplikat sehingga mengurangi kemudahan dan keamanan. Untuk mencegah hal tersebut dibutuhkan sistem keamanan ruangan yang baik dan mudah digunakan. Saat ini mulai dikembangkan sistem pengaman ruangan yang bersifat elektronik dengan menggunakan teknologi RFID (Radio-Frequency Identification) untuk meningkatkan sistem keamanan pada pintu rumah. Dalam penelitian ini membahas mengenai desain dan prototype pengunci pintu ruangan otomatis menggunakan sistem RFID. Metode penelitian yang digunakan adalah riset dan pengembangan. Pintu Otomatis ini diprogram oleh aplikasi Arduino dengan membuat sistem keamanan menggunakan Radio Frequency Identification (RFID) sebagai gelombang radio frekuensi pembawa data yang akan diterima receiver. Hasil dari penelitian ini adalah terciptanya sistem keamanan pintu rumah otomatis menggunakan RFID yang memiliki tingkat keamanan lebih baik dibandingkan dengan pengamanan manual, sehingga dapat menanggulangi terjadinya tindak pencurian pada rumah-rumah yang sering ditinggalkan oleh penghuninya. Selain itu penggunaan RFID ini juga dapat meminimalis keseluruan kunci pada rumah, sehingga setiap anggota keluarga cukup membutuhkan satu tag card / kunci untuk membuka seluruh kunci pada pintu yang ada di rumah. Kata kunci: Arduino Uno, RFID, Motor servo, Solenoid


2021 ◽  
Vol 19 (2) ◽  
pp. 47-53
Author(s):  
Herwin Simanjuntak ◽  
Rully Pramudita ◽  
Nadya Safitri

Abstract- At this time motorcycle theft cases are still often occur plus the increasing use of motorcycle vehicles, motorcycle theft is caused by the lack of a security system on the ignition which only uses keys and key covers, where security systems like this have been understood mostly motorcycle thieves, the necessity of a motorcycle safety system is needed. To overcome this, a Motorcycle Safety System was made using Arduno-based GPS and Radio Frequency Identification (RFID) to prevent and facilitate the recovery of stolen motor vehicles. The results of this study, the system is made using the Global Positioning System (GPS) as a tool to detect the location of motorcycles, and smart key contacts are added using RFID, SMS gateway and DC-DC Converter.


2022 ◽  
Vol 8 (2) ◽  
pp. 339-346
Author(s):  
Edi Saputra Siregar

Storage for goods is an important part of a mosque. When we are going to pray in congregation, the items or bags we carry make us anxious and afraid of losing. The development of technology has replaced the storage of goods carried out by mosque officials into an automated storage system. But it also needs to be considered in terms of the security system for storing these items. Researchers formulate how automation and security systems use RRFID. The research method used is research and development. The storage of this item is programmed with the Arduino and CX Programmer applications by creating a security system using Radio Frequency Identification (RFID) as radio waves carrying data that will be received by the RFID reader. The result of this research is an automatic door prototype using RFID which will operate properly. Reader ability to detect id card very good starting when the card is affixed to the reader and the selenoid system will work to open the door when the id card is attached.


Sign in / Sign up

Export Citation Format

Share Document