Morphology and properties of PA6 hybrid composites filled with short carbon fibers and organoclay

2016 ◽  
Vol 2 (3) ◽  
pp. 47-57 ◽  
Author(s):  
S.S. Pesetskii ◽  
S.P. Bogdanovich ◽  
V.V. Dubrovskii ◽  
T.M. Sodyleva ◽  
V.N. Aderikha ◽  
...  
Keyword(s):  
Carbon Fibers ◽  
Hybrid Composites ◽  
Short Carbon

Tribological performance of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica

Wear ◽  
2013 ◽  
Vol 303 (1-2) ◽  
pp. 397-404 ◽  
Author(s):  
A. Molazemhosseini ◽  
H. Tourani ◽  
A. Khavandi ◽  
B. Eftekhari Yekta
Keyword(s):  
Carbon Fibers ◽  
Hybrid Composites ◽  
Tribological Performance ◽  
Nano Silica ◽  
Short Carbon

Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica

2013 ◽  
Vol 32 (3) ◽  
pp. 525-534 ◽  
Author(s):  
A. Molazemhosseini ◽  
H. Tourani ◽  
M.R. Naimi-Jamal ◽  
A. Khavandi
Keyword(s):  
Carbon Fibers ◽  
Hybrid Composites ◽  
Nano Silica ◽  
Short Carbon

scholarly journals Absorption and Strength Properties of Short Carbon Fiber Reinforced Mortar Composite

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 300
Author(s):  
Md. Safiuddin ◽  
George Abdel-Sayed ◽  
Nataliya Hearn
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Water Absorption ◽  
Carbon Fibers ◽  
Strength Properties ◽  
Fiber Content ◽  
Test Results ◽  
Air Content ◽  
Entrapped Air ◽  
Short Carbon

This paper presents the water absorption and strength properties of short carbon fiber reinforced mortar (CFRM) composite. Four CFRM composites with 1%, 2%, 3%, and 4% short pitch-based carbon fibers were produced in this study. Normal Portland cement mortar (NCPM) was also prepared for use as the control mortar. The freshly mixed mortar composites were tested for workability, wet density, and entrapped air content. In addition, the hardened mortar composites were examined for compressive strength, splitting tensile strength, flexural strength, and water absorption at the ages of 7 and 28 days. The effects of different carbon fiber contents on the tested properties were observed. Test results showed that the incorporation of carbon fibers decreased the workability and wet density, but increased the entrapped air content in mortar composite. Most interestingly, the compressive strength of CFRM composite increased up to 3% carbon fiber content and then it declined significantly for 4% fiber content, depending on the workability and compaction of the mortar. In contrast, the splitting tensile strength and flexural strength of the CFRM composite increased for all fiber contents due to the greater cracking resistance and improved bond strength of the carbon fibers in the mortar. The presence of short pitch-based carbon fibers significantly strengthened the mortar by bridging the microcracks, resisting the propagation of these minute cracks, and impeding the growth of macrocracks. Furthermore, the water absorption of CFRM composite decreased up to 3% carbon fiber content and then it increased substantially for 4% fiber content, depending on the entrapped air content of the mortar. The overall test results suggest that the mortar with 3% carbon fibers is the optimum CFRM composite based on the tested properties.

Growth mechanism and thermal behavior of electroless Cu plating on short carbon fibers

2021 ◽  
pp. 127294
Author(s):  
Yuan Ma ◽  
Lingjun Guo ◽  
Lehua Qi ◽  
Jia Sun ◽  
Jiancheng Wang ◽  
...  
Keyword(s):  
Thermal Behavior ◽  
Carbon Fibers ◽  
Growth Mechanism ◽  
Short Carbon
Sign in / Sign up

Export Citation Format

Share Document