scholarly journals Definition of mutual thermal influence of containers with spent nuclear fuel at the open storage site

2018 ◽  
pp. 36-40
Author(s):  
S. Alyokhina ◽  
A. Kostikov ◽  
D. Lunov ◽  
O. Dybach ◽  
D. Dimitriieva
Keyword(s):  
Boundary Conditions ◽  
Nuclear Fuel ◽  
Thermal Condition ◽  
Spent Nuclear Fuel ◽  
Storage Site ◽  
Storage Facility ◽  
Spent Fuel ◽  
Wind Influence ◽  
Thermal Influence ◽  
Ventilation Duct

The problem of spent nuclear fuel handling in Ukraine is a key issue. A half of spent nuclear fuel is currently stored in Ukraine at the open-site dry storage facility at Zaporizhzhya NPP. Thermal safety analysis should be performed as a part of the storage facility safety assessment. Thermal analysis of a container group is a poorly investigated area. As literature review shows, current results do not clearly identify mutual influence of the containers and influence of weather conditions on the thermal condition of stored spent nuclear fuel. This type of analysis could be performed using the multi-stage methodology proposed by the authors. Thus, mutual thermal influence of the containers and boundary conditions at the inlets to the ventilation duct of each storage container should be identified. Thermal processes in the container group where spent nuclear fuel is stored that are described in this paper are analyzed by solving the conjugate heat transfer problems. A row of containers under wind influence is simulated and the structure of ventilation airflow inside the containers is identified. The mutual thermal influence of the containers is absent under calm conditions, and heated air does not come from one container to another. Resulting from the simulation, boundary conditions at the inlet of the ventilation duct are specified and can be used in the iterative modelling methodology for spent fuel thermal condition. The dependence of the velocity of the inlet ventilation air in the ventilation duct of each  container in the row was defined. The container placement methodology with the purpose of decreasing the wind influence on the thermal condition of spent fuel storage was proposed. Thermal studies are carried out for the containers and storage conditions of the dry spent nuclear storage facility at Zaporizhzhya NPP.

Developing a Concept for a National Used Fuel Interim Storage Facility in the United States

2013 ◽  
Author(s):  
Donald Wayne Lewis
Keyword(s):  
United States ◽  
Nuclear Fuel ◽  
Nuclear Waste ◽  
Spent Nuclear Fuel ◽  
The United States ◽  
Yucca Mountain ◽  
Storage Facility ◽  
Spent Fuel ◽  
Geological Repository ◽  
Interim Storage

In the United States (U.S.) the nuclear waste issue has plagued the nuclear industry for decades. Originally, spent fuel was to be reprocessed but with the threat of nuclear proliferation, spent fuel reprocessing has been eliminated, at least for now. In 1983, the Nuclear Waste Policy Act of 1982 [1] was established, authorizing development of one or more spent fuel and high-level nuclear waste geological repositories and a consolidated national storage facility, called a “Monitored Retrievable Storage” facility, that could store the spent nuclear fuel until it could be placed into the geological repository. Plans were under way to build a geological repository, Yucca Mountain, but with the decision by President Obama to terminate the development of Yucca Mountain, a consolidated national storage facility that can store spent fuel for an interim period until a new repository is established has become very important. Since reactor sites have not been able to wait for the government to come up with a storage or disposal location, spent fuel remains in wet or dry storage at each nuclear plant. The purpose of this paper is to present a concept developed to address the DOE’s goals stated above. This concept was developed over the past few months by collaboration between the DOE and industry experts that have experience in designing spent nuclear fuel facilities. The paper examines the current spent fuel storage conditions at shutdown reactor sites, operating reactor sites, and the type of storage systems (transportable versus non-transportable, welded or bolted). The concept lays out the basis for a pilot storage facility to house spent fuel from shutdown reactor sites and then how the pilot facility can be enlarged to a larger full scale consolidated interim storage facility.

Long Term Storage of Nuclear Spent Fuel as Key Role of Japan’s Nuclear Fuel Cycle Until 2100: Cost and Benefit

2010 ◽  
Author(s):  
Tadahiro Katsuta
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Nuclear Fuel Cycle ◽  
Storage Site ◽  
Spent Fuel ◽  
Final Disposal ◽  
Enriched Uranium ◽  
Interim Storage ◽  
Reprocessing Plant

Political and technical advantages to introduce spent nuclear fuel interim storage into Japan’s nuclear fuel cycle are examined. Once Rokkasho reprocessing plant starts operation, 80,000 tHM of spent Low Enriched Uranium (LEU) fuel must be stored in an Away From Reactor (AFR) interim storage site until 2100. If a succeeding reprocessing plant starts operating, the spent LEU will reach its peak of 30,000 tHM before 2050, and then will decrease until the end of the second reprocessing plant operation. Throughput of the second reprocessing plant is assumed as twice of that of Rokassho reprocessing plant, indeed 1,600tHM/year. On the other hand, tripled number of final disposal sites for High Level Nuclear Waste (HLW) will be necessary with this condition. Besides, large amount of plutonium surplus will occur, even if First Breeder Reactors (FBR)s consume the plutonium. At maximum, plutonium surplus will reach almost 500 tons. These results indicate that current nuclear policy does not solve the spent fuel problems but rather complicates them. Thus, reprocessing policy could put off the problems in spent fuel interim storage capacity and other issues could appear such as difficulties in large amount of HLW final disposal management or separated plutonium management. If there is no reprocessing or MOX use, the amount of spent fuel will reach over 115,000 tones at the year of 2100. However, the spent fuel management could be simplified and also the cost and the security would be improved by using an interim storage primarily.

Measurement of Atmospheric Sea Salt Concentration in the Dry Storage Facility of the Spent Nuclear Fuel

2006 ◽  
Author(s):  
Masumi Wataru ◽  
Hisashi Kato ◽  
Satoshi Kudo ◽  
Naoko Oshima ◽  
Koji Wada ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Spent Nuclear Fuel ◽  
Sea Salt ◽  
Storage Facility ◽  
Japan Society ◽  
Spent Fuel ◽  
Dry Storage ◽  
Storage Methods ◽  
Interim Storage

Spent nuclear fuel coming from a Japanese nuclear power plant is stored in the interim storage facility before reprocessing. There are two types of the storage methods which are wet and dry type. In Japan, it is anticipated that the dry storage facility will increase compared with the wet type facility. The dry interim storage facility using the metal cask has been operated in Japan. In another dry storage technology, there is a concrete overpack. Especially in USA, a lot of concrete overpacks are used for the dry interim storage. In Japan, for the concrete cask, the codes of the Japan Society of Mechanical Engineers and the governmental technical guidelines are prepared for the realization of the interim storage as well as the code for the metal cask. But the interim storage using the concrete overpack has not been in progress because the evaluation on the stress corrosion cracking (SCC) of the canister is not sufficient. Japanese interim storage facilities would be constructed near the seashore. The metal casks and concrete overpacks are stored in the storage building in Japan. On the other hand, in USA they are stored outside. It is necessary to remove the decay heat of the spent nuclear fuel in the cask from the storage building. Generally, the heat is removed by natural cooling in the dry storage facility. Air including the sea salt particles goes into the dry storage facility (Figure 1). Concerning the concrete overpack, air goes into the cask body and cools the canister. Air goes along the canister surface and is in contact with the surface directly. In this case, the sea salt in the air attaches to the surface and then there is the concern about the occurrence of the SCC. For the concrete overpack, the canister including the spent fuel is sealed by the welding. The loss of sealability caused by the SCC has to be avoided. To evaluate the SCC for the canister, it is necessary to make clear the amount of the sea salt particles coming into the storage building and the concentration on the canister. In present, the evaluation on that point is not sufficient. In this study, the concentration of the sea salt particles in the air and on the surface of the storage facility are measured inside and outside of the building. For the measurement, two sites of the dry storage facility using the metal cask are chosen. This data is applicable for the evaluation on the SCC of the canister to realize the interim storage using the concrete overpack.

scholarly journals The Three-­Dimensional Neutron-­Physical Model of Spent Nuclear Fuel Storage System

2021 ◽  
Vol 20 ◽  
pp. 51-59
Author(s):  
О. R. Trofymenko ◽  
◽  
І. M. Romanenko ◽  
М. І. Holiuk ◽  
C. V. Hrytsiuk ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Storage System ◽  
Three Dimensional ◽  
Monte Carlo Code ◽  
Storage Facility ◽  
Spent Fuel ◽  
Wide Range ◽  
Fuel Assemblies ◽  
Fuel Storage

The management of spent nuclear fuel is one of the most pressing problems of Ukraine’s nuclear energy. To solve this problem, as well as to increase Ukraine’s energy independence, the construction of a centralized spent nuclear fuel storage facility is being completed in the Chornobyl exclusion zone, where the spent fuel of Khmelnytsky, Rivne and South Ukrainian nuclear power plants will be stored for the next 100 years. The technology of centralized storage of spent nuclear fuel is based on the storage of fuel assemblies in ventilated HI-STORM concrete containers manufactured by Holtec International. Long-term operation of a spent nuclear fuel storage facility requires a clear understanding of all processes (thermohydraulic, neutron-physical, aging processes, etc.) occurring in HI-STORM containers. And this cannot be achieved without modeling these processes using modern specialized programs. Modeling of neutron and photon transfer makes it possible to analyze the level of protective properties of the container against radiation, optimize the loading of MPC assemblies of different manufacturers and different levels of combustion and evaluate biological protection against neutron and gamma radiation. In the future it will allow to estimate the change in the isotopic composition of the materials of the container, which will be used for the management of aging processes at the centralized storage of spent nuclear fuel. The article is devoted to the development of the three-dimensional model of the HI-STORM storage system. The model was developed using the modern Monte Carlo code Serpent. The presented model consists of models of 31 spent fuel assemblies 438MT manufactured by TVEL company, model MPC-31 and model HISTORM 190. The model allows to perform a wide range of scientific tasks required in the operation of centralized storage of spent nuclear fuel.

scholarly journals Nuclear and Radiation Safety of the Centralized Spent Fuel Storage Facility in Ukraine

2017 ◽  
pp. 3-10
Author(s):  
O. Hryhorash ◽  
O. Dybach ◽  
S. Kondratiev ◽  
O. Horbachenko ◽  
A. Panchenko ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Radiation Safety ◽  
Storage Facility ◽  
Spent Fuel ◽  
Regulatory Documents ◽  
Thermal Regimes ◽  
Fuel Storage ◽  
Nuclear And Radiation Safety ◽  
Biological Protection

The paper presents the analysis of ensuring nuclear and radiation safety in the management of spent nuclear fuel at the Centralized SFSF and activities planned for Centralized SFSF lifecycle stages. There are results of comparing requirements of U.S. regulatory documents used by the HOLTEC Company to design Centralized SFSF equipment staff with relevant requirements of Ukrainian regulations, results based on analysis of the most important factors of Centralized SFSF safety (strength and reliability, nuclear safety, thermal regimes and biological protection) and verified expert calculations of the SSTC NRS. The paper includes issues to be considered in further implementation of Centralized SFSF project.

Chemical Effects at the Reaction Front in Corroding Spent Nuclear Fuel

2006 ◽  
Vol 985 ◽  
Author(s):  
Jeffrey A. Fortner ◽  
A. Jeremy Kropf ◽  
James L. Jerden ◽  
James C. Cunnane
Keyword(s):  
Transition Zone ◽  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Aqueous Environment ◽  
Spent Fuel ◽  
Aqueous Corrosion ◽  
Reduction Potentials ◽  
Chemical Effects ◽  
Before And After ◽  
X Ray Absorption

AbstractPerformance assessment models of the U. S. repository at Yucca Mountain, Nevada suggest that neptunium from spent nuclear fuel is a potentially important dose contributor. A scientific understanding of how the UO2 matrix of spent nuclear fuel impacts the oxidative dissolution and reductive precipitation of Np is needed to predict the behavior of Np at the fuel surface during aqueous corrosion. Neptunium would most likely be transported as aqueous Np(V) species, but for this to occur it must first be oxidized from the Np(IV) state found within the parent spent nuclear fuel. In this paper we present synchrotron x-ray absorption spectroscopy and microscopy findings that illuminate the resultant local chemistry of neptunium and plutonium within uranium oxide spent nuclear fuel before and after corrosive alteration in an air-saturated aqueous environment. We find the Pu and Np in unaltered spent fuel to have a +4 oxidation state and an environment consistent with solid-solution in the UO2 matrix. During corrosion in an air-saturated aqueous environment, the uranium matrix is converted to uranyl (UO22+) mineral assemblage that is depleted in Np and Pu relative to the parent fuel. The transition from U(IV) in the fuel to a fully U(VI) character across the corrosion front is not sharp, but occurs over a transition zone of ∼ 50 micrometers. We find evidence of a thin (∼ 20 micrometer) layer that is enriched in Pu and Np within a predominantly U(IV) environment on the fuel side of the transition zone. These experimental observations are consistent with available data for the standard reduction potentials for NpO2+/Np4+ and UO22+/U4+ couples, which indicate that Np(IV) may not be effectively oxidized to Np(V) at the corrosion potential of uranium dioxide spent nuclear fuel in air-saturated aqueous solutions.

scholarly journals The Need for Integrating the Back End of the Nuclear Fuel Cycle in the United States of America

MRS Advances ◽  
2018 ◽  
Vol 3 (19) ◽  
pp. 991-1003 ◽  
Author(s):  
Evaristo J. Bonano ◽  
Elena A. Kalinina ◽  
Peter N. Swift
Keyword(s):  
United States ◽  
Nuclear Fuel ◽  
United States Of America ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Nuclear Fuel Cycle ◽  
The United States ◽  
Spent Fuel ◽  
Dry Storage ◽  
The Us

ABSTRACTCurrent practice for commercial spent nuclear fuel management in the United States of America (US) includes storage of spent fuel in both pools and dry storage cask systems at nuclear power plants. Most storage pools are filled to their operational capacity, and management of the approximately 2,200 metric tons of spent fuel newly discharged each year requires transferring older and cooler fuel from pools into dry storage. In the absence of a repository that can accept spent fuel for permanent disposal, projections indicate that the US will have approximately 134,000 metric tons of spent fuel in dry storage by mid-century when the last plants in the current reactor fleet are decommissioned. Current designs for storage systems rely on large dual-purpose (storage and transportation) canisters that are not optimized for disposal. Various options exist in the US for improving integration of management practices across the entire back end of the nuclear fuel cycle.

scholarly journals Prediction of the maximum temperature inside container with spent nuclear fuel

2018 ◽  
pp. 31-35
Author(s):  
S. Alyokhina ◽  
О. Dybach ◽  
A. Kostikov ◽  
D. Dimitriieva
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Maximum Temperature ◽  
Storage Facility ◽  
Storage Container ◽  
Atmospheric Air ◽  
Decay Heat ◽  
Fuel Storage ◽  
Maximum Temperatures ◽  
Cooling Air

The definition of the thermal state of containers with spent nuclear fuel is important part of the ensuring of its safe storage during all period of storage facility operation. The this work all investigations are carried out for the storage containers of spent nuclear fuel of WWER-1000 reactors, which are operated in the Dry Spent Nuclear Fuel Storage Facility in Zaporizhska NPP. The analysis of existing investigations in the world nuclear engineering science concerning to the prediction of maximum temperatures in spent nuclear fuel storage container is carried out. The absence of studies in this field is detected and the necessity of the dependence for the maximum temperature in the storage container and temperature of cooling air on the exit of ventilation duct from variated temperatures of atmospheric air and decay heat formulation is pointed out. With usage of numerical simulation by solving of the conjugate heat transfer problems, the dependence of maximum temperatures in storage container with spent nuclear fuel from atmospheric temperature and decay heat is detected. The verification of used calculation method by comparison of measured air temperature on exit of ventilation channels and calculated temperature of cooling air was carried out. By regression analysis of numerical results of studies the dependence of ventilation air temperature from the temperature of atmospheric air and the decay heat of spent nuclear fuel was formulated. For the obtained dependence the statistical analysis was carried out and confidence interval with 95% of confidence is calculated. The obtained dependences are expediently to use under maximum temperature level estimation at specified operation conditions of spent nuclear fuel storage containers and for the control of correctness of thermal monitoring system work.

Sign in / Sign up

Export Citation Format

Share Document