SOLVENT EFFECTS ON THE ELECTRONIC STRUCTURE AND NON-LINEAR OPTICAL PROPERTIES OF PYRENE AND SOME OF ITS DERIVATIVES BASED ON DENSITY FUNCTIONAL THEORY

2021 ◽  
Vol 4 (4) ◽  
pp. 236-251
Author(s):  
A. S. Gidado ◽  
L. S. Taura ◽  
A. Musa
Keyword(s):  
Density Functional Theory ◽  
Gas Phase ◽  
Density Functional ◽  
Energy Gap ◽  
Chemical Reactivity ◽  
Basis Set ◽  
Lumo Energy ◽  
Functional Theory ◽  
Organic Optoelectronic ◽  
Homo Lumo

Pyrene (C16H10) is an organic semiconductor which has wide applications in the field of organic electronics suitable for the development of organic light emitting diodes (OLED) and organic photovoltaic cells (OPV). In this work, Density Functional Theory (DFT) using Becke’s three and Lee Yang Parr (B3LYP) functional with basis set 6-311++G(d, p) implemented in Gaussian 03 package was  used to compute total energy, bond parameters, HOMO-LUMO energy gap, electron affinity, ionization potential, chemical reactivity descriptors, dipole moment, isotropic polarizability (α), anisotropy of polarizability ( Δ∝) total first order hyper-polarizability () and second order hyperpolarizability (). The molecules used are pyrene, 1-chloropyrene and 4-chloropyrene  in gas phase and in five different solvents: benzene, chloroform, acetone, DMSO and water. The results obtained show that solvents and chlorination actually influenced the properties of the molecules. The isolated pyrene in acetone has the largest value of HOMO-LUMO energy gap of and is a bit closer to a previously reported experimental value of  and hence is the most stable. Thus, the pyrene molecule has more kinetic stability and can be described as low reactive molecule. The calculated dipole moments are in the order of 4-chloropyrene (1.7645 D) < 1-chloropyrene (1.9663 D) in gas phase. The anisotropy of polarizability ( for pyrene and its derivatives were found to increase with increasing polarity of the solvents.  In a nutshell, the molecules will be promising for organic optoelectronic devices based on their computed properties as reported by this work.

STRUCTURES, ABSORPTION SPECTRA, AND ELECTRONIC PROPERTIES OF POLYFLUORENE AND ITS DERIVATIVES: A THEORETICAL STUDY

2006 ◽  
Vol 05 (03) ◽  
pp. 595-608 ◽  
Author(s):  
KRIENGSAK SRIWICHITKAMOL ◽  
SONGWUT SURAMITR ◽  
POTJAMAN POOLMEE ◽  
SUPA HANNONGBUA
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Level Energy ◽  
Excitation Energies ◽  
Lumo Energy ◽  
Functional Theory ◽  
Local Energy Minimum ◽  
Pi Systems ◽  
Homo Lumo

The structural and energetic properties of polyfluorene and its derivatives were investigated, using quantum chemical calculations. Conformational analysis of bifluorene was performed by using ab initio (HF/6-31G* and MP2/6-31G*) and density functional theory (B3LYP/6-31G*) calculations. The results showed that the local energy minimum of bifluorene lies between the coplanar and perpendicular conformation, and the B3LYP/6-31G* calculations led to the overestimation of the stability of the planar pi systems. The HOMO-LUMO energy differences of fluorene oligomers and its derivatives — 9,9-dihexylfluorene (DHPF), 9,9-dioctylfluorene (PFO), and bis(2-ethylhexyl)fluorene (BEHPF) — were calculated at the B3LYP/6-31G* level. Energy gaps and effective conjugation lengths of the corresponding polymers were obtained by extrapolating HOMO-LUMO energy differences and the lowest excitation energies to infinite chain length. The lowest excitation energies and the maximum absorption wavelength of polyfluorene were also performed, employing the time-dependent density functional theory (TDDFT) and ZINDO methods. The extrapolations, based on TDDFT and ZINDO calculations, agree well with experimental results. These theoretical methods can be useful for the design of new polymeric structures with a reducing energy gap.

scholarly journals Molecular Geometry, NLO, MEP, HOMO-LUMO and Mulliken Charges of Substituted Piperidine Phenyl Hydrazines by Using Density Functional Theory

2019 ◽  
Vol 32 (2) ◽  
pp. 401-407
Author(s):  
M. Dinesh Kumar ◽  
P. Rajesh ◽  
R. Priya Dharsini ◽  
M. Ezhil Inban
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Chemical Reactivity ◽  
Molecular Geometry ◽  
Basis Set ◽  
Functional Theory ◽  
B3lyp Method ◽  
Reactivity Descriptor ◽  
Homo Lumo ◽  
Optimized Geometries

The quantum chemical calculations of organic compounds viz. (E)-1-(2,6-bis(4-chlorophenyl)-3-ethylpiperidine-4-ylidene)-2-phenyl-hydrazine (3ECl), (E)-1-(2,6-bis(4-chlorophenyl)-3-methylpiperidine-4-ylidene)-2-phenylhydrazine (3MCl) and (E)-1-(2,6-bis(4-chloro-phenyl)-3,5-dimethylpiperidine-4-ylidene)-2-phenylhydrazine (3,5-DMCl) have been performed by density functional theory (DFT) using B3LYP method with 6-311G (d,p) basis set. The electronic properties such as Frontier orbital and band gap energies have been calculated using DFT. Global reactivity descriptor has been computed to predict chemical stability and reactivity of the molecule. The chemical reactivity sites of compounds were predicted by mapping molecular electrostatic potential (MEP) surface over optimized geometries and comparing these with MEP map generated over crystal structures. The charge distribution of molecules predict by using Mulliken atomic charges. The non-linear optical property was predicted and interpreted the dipole moment (μ), polarizability (α) and hyperpolarizability (β) by using density functional theory.

scholarly journals Investigation of the Effects of Solvents on the Structural, Electronic and Thermodynamic Properties of Rosiglitazone Based on Density Functional Theory

2019 ◽  
pp. 1-18
Author(s):  
R. A. Ismail ◽  
A. B. Suleiman ◽  
A. S. Gidado ◽  
A. Lawan ◽  
A. Musa
Keyword(s):  
Density Functional Theory ◽  
Dipole Moment ◽  
Thermodynamic Properties ◽  
Gas Phase ◽  
Density Functional ◽  
Dielectric Constants ◽  
Basis Sets ◽  
Lumo Energy ◽  
Functional Theory ◽  
Homo Lumo

Rosiglitazone ( C18H19N3O3S ) is an anti-diabetic drug that reduces insulin resistance in patients with type 2 diabetes. The parameters (bond lengths and bond angles), HOMO, LUMO, HOMO-LUMO energy gap, dipole moment, thermodynamic properties, total energy and vibrational frequencies and intensities of the Rosiglitazone molecule in gas phase and in solvents (Water, Ethanol, DMSO and Acetonitrile) were calculated based on Density Functional Theory (DFT) using standard basis sets: B3LYP/6-31G(d,p), B3LYP/6-31+G(d,p) and B3LYP/6-31++G(d,p). Windows version of Gaussian 09 was used for all the calculations. From the results obtained, the solvents have little influence on the optimized parameters of the molecule. The highest HOMO value of -5.433 eV was found in gas phase showing that the molecule will best donate electron in the gas phase, followed by ethanol in comparison with other solvents. The values of the HOMO were observed to increase with the decrease in dielectric constants of the solvents across all the basis sets used. The lowest LUMO energy of -1.448 eV was found to be in ethanol which shows that the molecule will best accept electron in ethanol compared to the gas phase and other solvents. The largest HOMO-LUMO gap of 4.285 eV was found in water which shows its higher kinetic stability and less chemical reactivity compared to other solvents and in the gas phase. The chemical softness of the molecule was found to decrease as the dielectric constants of the solvents increased namely from ethanol to water. The chemical hardness was found to slightly increase with the increase in dielectric constants of the solvents. The highest value of the dipole moment of 4.6874 D was found in water indicating that the molecule will have the strongest intermolecular interactions in water compared to other solvents and in the gas phase. The total energy increased as the dielectric constants of the solvents decreased from water to ethanol. The vibrational frequencies and intensities increased as the dielectric constants of the solvents increased from ethanol to water. The results confirmed the effects of solvents on the structural, electronic and thermodynamic properties of the studied molecule and will be useful in the design and development of rosiglitazone as an anti-diabetic drug.

scholarly journals Structure, electronic and optical properties of chalcopyrite-type nano-clusters XFeY2 (X=Cu, Ag, Au; Y=S, Se, Te): a density functional theory study

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Prabhat Ranjan ◽  
Praveen K. Surolia ◽  
Tanmoy Chakraborty
Keyword(s):  
Density Functional Theory ◽  
Dielectric Constant ◽  
Refractive Index ◽  
Optical Properties ◽  
Solar Cells ◽  
Density Functional ◽  
Energy Gap ◽  
Lumo Energy ◽  
Functional Theory ◽  
Homo Lumo

Abstract Iron-based chalcopyrite materials have diverse applications in solar cells, spintronic, thermoelectric devices, LEDs and medical sciences. In this report we have studied structure, electronic and optical properties of chalcopyrite-type nano-cluster XFeY2 (X=Cu, Ag, Au; Y=S, Se, Te) systematically by using Density Functional Theory (DFT). Our computed HOMO-LUMO energy gap of XFeY2 is in the range of 1.568–3.982 eV, which endorses its potential application in optoelectronic devices and solar cells. The result shows that chalcopyrite-type material AuFeS2 having a star-type structure with point group C2v and sextet spin multiplicity, is the most stable cluster with HOMO-LUMO energy gap of 3.982 eV. The optical properties viz. optical electronegativity, refractive index, dielectric constant, IR and Raman activity of these nano-clusters are also investigated. The result exhibits that HOMO-LUMO energy gap of XFeY2 along with optical electronegativity and vibrational frequency decreases from S to Se to Te, whereas refractive index and dielectric constant increases in the reverse order.

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

2014 ◽  
Vol 68 (3) ◽  
Author(s):  
Ali Peyghan ◽  
Maziar Noei
Keyword(s):  
Density Functional Theory ◽  
Electron Emission ◽  
Density Functional ◽  
Energy Gap ◽  
Density Functional Theory Calculations ◽  
C60 Fullerene ◽  
Lumo Energy ◽  
Functional Theory ◽  
Reaction Energies ◽  
Homo Lumo

AbstractThe functionalisation of C60 fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C60 with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C60 via [4+2] and [2+2] cycloadditions bearing reaction energies of −15.9 kcal mol−1 and −72.4 kcal mol−1, respectively. The HOMO-LUMO energy gap and work function of C60 are significantly reduced following completion of the reactions. The field electron emission current of the C60 surface will increase after functionalisation of either the I or II molecule.

A DFT Study of Geometric Structure and Stability of Iron-Silicon Clusters

2014 ◽  
Vol 1048 ◽  
pp. 369-372
Author(s):  
Shuai Qin Yu ◽  
Hong Nan Ye
Keyword(s):  
Density Functional Theory ◽  
Geometric Structure ◽  
Density Functional ◽  
Energy Gap ◽  
Surface Site ◽  
Silicon Clusters ◽  
Lumo Energy ◽  
Functional Theory ◽  
The Stability ◽  
Homo Lumo

Geometric structures of Fe6-xSix(x=1-5) clusters have been systematically studied at the BPW91 level by density-functional theory (DFT). Calculated results show that the Fe atoms of the lowest-energy structures of Fe6-xSix clusters tend to go together, and Si atoms tend to occupy surface site bonding with iron atoms as many as possible. Further, we analyze the stability of the lowest-energy structures of Fe6-xSix clusters, and the corresponding results of the HOMO, LUMO as well as the HOMO-LUMO energy gap show that the Fe5Si and Fe4Si2 clusters have special stability.

Density functional theory study of structural, magnetic and spectral properties of the CrmFen (m + n = 6) and CrmFenCu (m + n = 5) clusters

2019 ◽  
Vol 9 (6) ◽  
pp. 570-577
Author(s):  
Yunlong Chen ◽  
Zhenghua Tang ◽  
Chong He ◽  
Yong Sheng
Keyword(s):  
Density Functional Theory ◽  
Infrared Spectroscopy ◽  
Density Functional ◽  
Energy Gap ◽  
Binding Energies ◽  
Chemical Hardness ◽  
Lumo Energy ◽  
Functional Theory ◽  
Homo Lumo ◽  
Original Cluster

Using Density functional theory (DFT) to study the geometries, stability, magnetic properties and infrared spectroscopy of CrmFen (m + n = 6) and CrmFenCu (m + n = 5) clusters at the BP86/SDD level. The ground state structures of CrmFen (m + n = 6) and CrmFenCu (m + n = 5) clusters are determined according to the principles of lowest energy and no virtual frequency. On this basis, the structural and chemical stabilities are obtained by the average binding energies (Eb), chemical hardness (η) and HOMO-LUMO energy gap (Eg). The average binding energies show the substitution of a copper atom is beneficial to improve the structural stability; It can be seen Cr4Fe2 and Cr3Fe2Cu have the best chemical stability in the two cluster series from the chemical hardness and HOMO-LUMO energy gap. By calculating the magnetic moment, it is shown that Cr5Fe and CrFe4Cu have large magnetic moments, which can be understood by the spin distribution. Finally, infrared spectroscopy of the clusters are calculated, we find a copper atom substitutes the CrmFen (m + n = 6) does not change the range of vibration frequency a lot because it does not significantly change the molecular structure of the original cluster, but it changes the vibration mode of the original cluster, resulting in the strongest infrared absorption peak intensity of Cr3Fe2Cu being lower than that of Cr3Fe3.

DFT STUDY OF COFn(n = 1-6) NANO CLUSTERS: AN INVESTIGATION OF SUPERHALOGEN PROPERTIES

2012 ◽  
Vol 11 (04) ◽  
pp. 723-734 ◽  
Author(s):  
SHAMOON AHMAD SIDDIQUI
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Dft Study ◽  
Anionic Form ◽  
Electron Affinities ◽  
Lumo Energy ◽  
Functional Theory ◽  
Homo Lumo ◽  
Peak Value

Superhalogen properties of CoFn (n = 1 - 6) clusters have been investigated using density functional theory. These calculations reveal the unusual properties of a Cobalt (Co) atom interacting with fluorine (F) atoms. Up to six F atoms are bound to a single Co atom, which results in increase of electron affinities as successive fluorine atoms are attached, reaching a peak value of 7.43 eV for CoF5 . The large HOMO–LUMO energy gap, both in neutral and anionic form, further provide evidence of their stability. These unusual properties brought about by involvement of inner shell 3d-electrons, which not only allow CoFn (n = 1 - 6) clusters to belong to the class of superhalogens but also show that its valence can exceed the nominal value of 2 or 3.

scholarly journals Crystal structure, Hirshfeld surface analysis and density functional theory study of benzyl 2-oxo-1-(prop-2-yn-1-yl)-1,2-dihydroquinoline-4-carboxylate

2021 ◽  
Vol 77 (8) ◽  
pp. 824-828
Author(s):  
Younos Bouzian ◽  
Karim Chkirate ◽  
Joel T. Mague ◽  
Fares Hezam Al-Ostoot ◽  
Noureddine Hammou Ahabchane ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Surface Analysis ◽  
Density Functional ◽  
Energy Gap ◽  
Crystal Packing ◽  
Hirshfeld Surface ◽  
Hirshfeld Surface Analysis ◽  
Lumo Energy ◽  
Functional Theory ◽  
Homo Lumo

The title molecule, C20H15NO3, adopts a Z-shaped conformation with the carboxyl group nearly coplanar with the dihydroquinoline unit. In the crystal, corrugated layers are formed by C—H...O hydrogen bonds and are stacked by C—H...π(ring) interactions. Hirshfeld surface analysis indicates that the most important contributions to the crystal packing are from H...H (43.3%), H...C/C...H (26.6%) and H...O/O...H (16.3%) interactions. The optimized structure calculated using density functional theory at the B3LYP/ 6–311 G(d,p) level is compared with the experimentally determined structure in the solid state. The calculated HOMO–LUMO energy gap is 4.0319 eV.

scholarly journals Density Functional Theory and Molecular Docking Investigations of the Chemical and Antibacterial Activities for 1-(4-Hydroxyphenyl)-3-phenylprop-2-en-1-one

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3631
Author(s):  
Ahmed M. Deghady ◽  
Rageh K. Hussein ◽  
Abdulrahman G. Alhamzani ◽  
Abeer Mera
Keyword(s):  
Density Functional Theory ◽  
Antibacterial Activity ◽  
Molecular Docking ◽  
Carbonyl Group ◽  
Active Sites ◽  
Density Functional ◽  
Chemical Reactivity ◽  
Basis Set ◽  
Molecular Docking Study ◽  
Functional Theory

The present investigation informs a descriptive study of 1-(4-Hydroxyphenyl) -3-phenylprop-2-en-1-one compound, by using density functional theory at B3LYP method with 6-311G** basis set. The oxygen atoms and π-system revealed a high chemical reactivity for the title compound as electron donor spots and active sites for an electrophilic attack. Quantum chemical parameters such as hardness (η), softness (S), electronegativity (χ), and electrophilicity (ω) were yielded as descriptors for the molecule’s chemical behavior. The optimized molecular structure was obtained, and the experimental data were matched with geometrical analysis values describing the molecule’s stable structure. The computed FT-IR and Raman vibrational frequencies were in good agreement with those observed experimentally. In a molecular docking study, the inhibitory potential of the studied molecule was evaluated against the penicillin-binding proteins of Staphylococcus aureus bacteria. The carbonyl group in the molecule was shown to play a significant role in antibacterial activity, four bonds were formed by the carbonyl group with the key protein of the bacteria (three favorable hydrogen bonds plus one van der Waals bond) out of six interactions. The strong antibacterial activity was also indicated by the calculated high binding energy (−7.40 kcal/mol).

Sign in / Sign up

Export Citation Format

Share Document