scholarly journals Scientific Advances and Pharmacological Applications of Marine Derived-Collagen and Chitosan

2021 ◽  
Vol 12 (3) ◽  
pp. 3540-3558
Keyword(s):  
Corrosion Resistance ◽  
Arc Welding ◽  
Transfer Resistance ◽  
Welded Steel ◽  
Excellent Corrosion Resistance ◽  
Sem Micrograph ◽  
Alumina Composite ◽  
Noticeable Reduction ◽  
Current Densities ◽  
Environment Cost

This work is devoted to investigating the effect of arc welding energy on microstructures and mechanical properties of steel 316L. This later is very useful in industrial, infrastructure transportation, containers shipping, and almost logistic applications. For that reason, five samples of welded steel 316L were carried out based on many parameters to reveal some properties (microstructure, mechanical, corrosion resistance, etc.). To reveal the anticorrosion efficiency. The epoxy/Alumina composite coating on welded steel 316L is tested in 1M HCl acidic media. This manipulation shows excellent corrosion resistance thanks to epoxy/Alumina coated. The choices of this coating are based on the environment, cost and safety. The used epoxy is only degrading with fire but not toxic. Also, it is not a costly method, and it is widely used and performed. Impedance studies on samples of welded steel 316L were conducted in 1M HCl media. The results showed that transfer resistance is increasing with the increase of welding energy. This result was assessed by potentiodynamic polarization measurements indicating a noticeable reduction of current densities with welding energy decrease. The scanning electron microscope (SEM) micrograph was undertaken in order to check how far the studied samples are protected by the used coating in such aggressive media.

COPPER ALLOY No. 954

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Excellent Corrosion Resistance ◽  
Aluminum Iron ◽  
Copper Aluminum

Abstract Copper Alloy No. 954 is a copper-aluminum-iron alloy characterized by high strength and hardness, good resistance to fatigue and wear, and excellent corrosion resistance. It is suited for service up to 750 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-292. Producer or source: Copper alloy foundries.

MUELLER ALLOY 3140

Alloy Digest ◽  
1983 ◽  
Vol 32 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Content ◽  
Atmospheric Conditions ◽  
Excellent Corrosion Resistance ◽  
High Copper ◽  
Screw Machine

Abstract MUELLER Alloy 3140 is a high-copper alloy with moderate strength, a rich bronze color and excellent corrosion resistance. Its lead content gives it excellent machinability which makes it suitable for screw-machine applications. Its uses include many screw-machine products, decorative hardware, pickling crates and parts to resist severe atmospheric conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-451. Producer or source: Mueller Brass Company.

INCONEL FILLER METAL 52

Alloy Digest ◽  
1992 ◽  
Vol 41 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Arc Welding ◽  
Filler Metal ◽  
Pressurized Water Reactors ◽  
Pressurized Water ◽  
High Chromium ◽  
Inconel Alloy ◽  
Gas Tungsten Arc ◽  
Alloy 690 ◽  
Water Reactors

Abstract INCONEL FILLER METAL 52 is a high chromium filler metal for gas-metal-arc and gas-tungsten-arc welding of Inconel Alloy 690 (See Alloy Digest Ni-266, March 1981). Higher chromium is beneficial in resisting stress-corrosion cracking in high purity water for pressurized water reactors and for resistance to oxidizing acids. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-412. Producer or source: Inco Alloys International Inc..

REVERE No. 430

Alloy Digest ◽  
1958 ◽  
Vol 7 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance

Abstract REVERE No. 430 is an aluminum bronze having high strength, excellent corrosion resistance, and high resistance to sulfuric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-63. Producer or source: Revere Copper and Brass Inc..

APEX 417

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Dimensional Stability ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Excellent Corrosion Resistance ◽  
Magnesium Casting ◽  
Strength And Ductility

Abstract APEX 417 is an aluminum-magnesium casting alloy having high strength and ductility, excellent corrosion resistance and good dimensional stability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-61. Producer or source: Apex Smelting Company.

INCO-WELD B ELECTRODE

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Tensile Properties ◽  
Arc Welding ◽  
Base Alloy ◽  
Heat Treating ◽  
Alternating Current ◽  
Nickel Base Alloy ◽  
Shielded Metal Arc Welding ◽  
Metal Arc Welding ◽  
Nickel Base

Abstract INCO-WELD B is a nickel-base alloy developed for shielded metal-arc welding of nickel steels for cryogenic applications. It is similar to INCO-WELD A Electrode (Alloy Digest Ni-305, November 1984) except that it is designed for use with alternating current to minimize magnetic arc blow. It can be operated in all welding positions. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-307. Producer or source: Huntington Alloys.

BÖHLER L359

Alloy Digest ◽  
2012 ◽  
Vol 61 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Good Resistance ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance ◽  
Resistance To Stress ◽  
Nickel Base

Abstract Böhler (or Boehler) L359 is a nickel-base alloy with good resistance to stress-corrosion cracking, and excellent corrosion resistance to all types of nonuniform corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: Ni-700. Producer or source: Böhler-Uddeholm North America.

TUNGUM ALLOY

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Weight Ratio ◽  
High Strength ◽  
Fatigue Properties ◽  
Excellent Corrosion Resistance

Abstract Tungum alloy combines an unusually high strength-to-weight ratio, with ductility, excellent corrosion resistance, and good fatigue properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Cu-806. Producer or source: Tungum Ltd.

ALUMINUM 214

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Food Processing ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aluminum Company ◽  
Excellent Corrosion Resistance ◽  
Marine Applications

Abstract Aluminum 214 is a non-heat treatable alloy containing 4% magnesium and characterized by excellent corrosion resistance and excellent weldability. It is recommended for marine applications and food processing equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-141. Producer or source: Aluminum Company of America.

MALLORY 53B

Alloy Digest ◽  
1965 ◽  
Vol 14 (9) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
High Heat ◽  
Excellent Corrosion Resistance

Abstract MALLORY 53B is an economical copper alloy combining high strength with high heat and electrical conductivity and excellent corrosion resistance. It is heat treatable. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-155. Producer or source: P. R. Mallory & Company Inc..

Sign in / Sign up

Export Citation Format

Share Document