Release Kinetics Study of Azithromycin from Bi-layered Tablets

The objective of this study was to analysis in vitro release kinetics of Azithromycin from bi-layer tablets prepared by direct compression using high viscosity to low viscosity grades of hydroxypropyl methyl cellulose (HPMC K15M, HPMC K4M, HPMC 50 cps), Carbopol 934p and Carbopol 974p. In addition, it also includes evaluating the effect of formulation variables like polymer proportion and polymer viscosity on the release of Azithromycin. In vitro release studies were performed using USP Type-II (Rotating paddle method) at 100 rpm. The dissolution medium consisted of 0.1N HCl (900 ml) for the first 2 hr and the phosphate buffer (pH 6.0) from 3rd to 10th hour. From twenty five different formulations (F-1 to F-25) based on polymer variation, model-dependent and independent methods were used for data analysis and the best results were observed for HPMC 50cps in Korsmeyer- Peppas (R2=0.995 on F-23) kinetic model. The release mechanism of all formulations was Fickian.Bangladesh Pharmaceutical Journal 20(1): 54-63, 2017

Download Full-text

In vitro Release Kinetics Study of Ranolazine from Swellable Hydrophilic Matrix Tablets

Dhaka University Journal of Pharmaceutical Sciences ◽

10.3329/dujps.v8i1.5333 ◽

1970 ◽

Vol 8 (1) ◽

pp. 31-38 ◽

Cited By ~ 1

Author(s):

Mohammad Nezab Uddin ◽

Ishtiaq Ahmed ◽

Monzurul Amin Roni ◽

Muhammad Rashedul Islam ◽

Mohammad Habibur Rahman ◽

...

Keyword(s):

Drug Release ◽

Sustained Release ◽

Release Kinetics ◽

In Vitro Release ◽

High Viscosity ◽

Matrix Tablets ◽

Release Studies ◽

The Matrix ◽

Vitro Release

The objective of this study was to design oral sustained release matrix tablets of Ranolazine usinghydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of formulation factors suchas polymer proportion and polymer viscosity on the release of drug. In vitro release studies were performed usingUSP type II apparatus (paddle method) in 900 mL of 0.1N HCl at 100 rpm for 12 hours. The release kinetics wasanalyzed using the zero-order, first order, Higuchi and Korsmeyer-Peppas equations to explore and explain themechanism of drug release from the matrix tablets. In vitro release studies revealed that the release rate decreasedwith increase in polymer proportion and viscosity grade. Mathematical analysis of the release kinetics indicated thatthe nature of drug release from the matrix tablets was dependent on drug diffusion and polymer relaxation andtherefore followed non-Fickian or anomalous release. The developed controlled release matrix tablets of Ranolazineprepared with high viscosity HPMC extended release up to 12 hours.Key words: Ranolazine; Sustained release; Methocel E50 Premium LV; Methocel K100LV CR; Methocel K4M CR;Methocel K15M CR.DOI: 10.3329/dujps.v8i1.5333Dhaka Univ. J. Pharm. Sci. 8(1): 31-38, 2009 (June)

Download Full-text

FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

International Journal of Applied Pharmaceutics ◽

10.22159/ijap.2021v13i1.39965 ◽

2021 ◽

pp. 206-215

Author(s):

DHARMENDER PALLERLA ◽

SUMAN BANOTH ◽

SUNKARI JYOTHI

Keyword(s):

Drug Release ◽

In Vitro Release ◽

Controlled Drug Release ◽

Fickian Diffusion ◽

Simulated Gastric Fluid ◽

Release Mechanism ◽

Release Studies ◽

Swelling Studies ◽

Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

Download Full-text

Effect of Polymers nature and Stirring Speeds on Physicochemical Properties and the Controlled Release of Allopurinol-loaded Microspheres

Journal of the Mexican Chemical Society ◽

10.29356/jmcs.v66i1.1583 ◽

2021 ◽

Vol 66 (1) ◽

Author(s):

Karima Badis ◽

Haouaria Merine ◽

Youssef Ramli ◽

OumCheikh Larbi ◽

Cherifa Hakima Memou

Keyword(s):

Fourier Transforms ◽

Release Kinetics ◽

Drug Loading ◽

In Vitro Release ◽

Release Mechanism ◽

Release Studies ◽

Fourier Transforms Infrared Spectroscopy ◽

The Mean ◽

Solvent Evaporation Process

Abstract. Allopurinol is an antigout drug therapy, commonly used in the treatment of chronic gout or hyperuricaemia associated with treatment of diuretic conditions. In the present study, new formulations based on Allopurinol, have been prepared with the microencapsulation by solvent evaporation process. Microspheres were prepared using pure Allopurinol and polymeric matrices (ethylcellulose EC, poly (ε-caprolactone) PCL, β-cyclodextrin CD and hydroxypropylmethylcellulose HPMC) at different compositions and stirring speeds to investigate the effect of these parameters on loading efficiency and drug release kinetics. The formulations produced were characterized by various methods : Fourier transforms infrared spectroscopy (FTIR), X-ray powder diffractometry, optical microscopy, surface morphology by scanning electron microscopy (SEM) and drug loading, as well as in vitro release studies in the simulated stomach tract. Depending on the stirring speed and the composition of the microparticles, the active ingredient loading is in a range from 10.46 ± 1.45 to 46.40 ± 0.5%. The microspheres are spherical and the mean Sauter diameter (d32) of the microparticles obtained is smaller and is in the range of 47.71 to 151.01 µm. Different release profiles were obtained and show that the release rate is strongly influenced by the characteristics of the microparticles ; namely, the stirring rates and the composition of the microparticles. The release mechanism was identified by modelling using Higuchi and Korsmeyer-Peppas models. Resumen. Alopurinol es una droga terapéutica para tratar la gota, y se utiliza en el tratamiento de gota crónica o hiperuricemia asociada con el tratamiento de condiciones diuréticas. En este estudio, nuevas formulaciones basadas en Alopurinol se prepararon mediante microencapsulación por el proceso de evaporación de disolvente. Microesferas se prepararon usando Alopurinol puro y diferentes matrices poliméricas (etil-celulosa EC, poli(-caprolactona) PCL, β-cyclodextrina CD e hidroxipropil-metil-celulose HPMC) en diferentes composiciones y velocidades de agitación, para investigar el efecto de estos parámetros en la eficiencia de carga y en la cinética de liberación del fármaco. Las formulaciones obtenidas fueron caracterizadas por diferentes técnicas : Espectroscopía infrarroja de transformadas de Fourier (FTIR), difractometría de rayos X de polvos, microscopía óptica, morfología de superficies mediante microscopía electrónica de barrido electrónico, y la eficiencia de carga del fármaco, así como estudios de liberación in vitro en tracto estomacal simulado. Dependiendo de la velocidad de agitación y la composición de las micropartículas, la carga del ingrediente activo se encuentra en el rango de 10.46 ± 1.45 a 46.40 ± 0.5%. Las microesferas son esféricas y el diámetro medio de Sauter (d32) de las micropartículas obtenidas es menor, y se encuentra en el rango de 47.71 a 151.01 µm. Se obtuvieron diferentes perfiles de liberación y se observa que la velocidad de liberación está influenciada principalmente por las características propias de la producción de las micropartículas ; en particualr, las velocidades de agitación y las composición de las micropartículas. El mecanismo de liberación se ajusta mejor a los modelos matemáticos de Higuchi and Korsmeyer-Peppas.

Download Full-text

FORMULATION AND EVALUATION OF TRANSDERMAL PATCHES OF PANTOPRAZOLE SODIUM

International Journal of Applied Pharmaceutics ◽

10.22159/ijap.2021v13i5.42175 ◽

2021 ◽

pp. 287-291

Author(s):

M. R. SHIVALINGAM ◽

ARUL BALASUBRAMANIAN ◽

KOTHAI RAMALINGAM

Keyword(s):

In Vitro Release ◽

Skin Permeability ◽

Release Mechanism ◽

Content Uniformity ◽

Prolonged Release ◽

Peptic Ulcers ◽

Transdermal Patches ◽

Release Studies ◽

Vitro Release

Objective: The present study was an attempt to develop an alternative dosage form for the existing conventional oral, parenteral proton pump inhibitor (PPI) as transdermal patches for treating peptic ulcers. Methods: Transdermal patches of PPI were prepared using HPMC E5 with PVP K 30 and HPMC E5 with Eudragit L100 polymers in different ratios by a solvent evaporation method. All the formulated patches were subjected to various evaluation parameters such as thickness, folding endurance, weight uniformity, content uniformity, swelling index, percentage moisture content, moisture uptake, surface pH and in vitro release studies. Results: All patches exhibited satisfactory characteristics regarding integrity, flexibility, dispersion of drug, and other quality control parameters. In the in vitro release studies of transdermal patches, formulation F1 showed the prolonged release of drug (98.99 %) for 24 h, which indicates the maximum availability of the drug, and the in vitro skin permeability studies also showed that 96.26 % of drug Pantoprazole sodium permeated through the rat abdominal skin in 24 h. The kinetic studies were carried out and it was found that all the formulations follow zero-order and the release mechanism of drugs was found to be diffusion rate-limited, Non-Fickian mechanism which was confirmed by Korsmeyer–Peppas model. Conclusion: This suggests the transdermal application of Pantoprazole sodium holds the promised controlled release of the drug for an extended period of time.

Download Full-text

Release Profile of Losartan Potassium from Formulated Sustained Release Matrix Tablet

Bangladesh Pharmaceutical Journal ◽

10.3329/bpj.v16i2.22301 ◽

2015 ◽

Vol 16 (2) ◽

pp. 177-183

Author(s):

Md Ziaur Rahman ◽

Sayed Koushik Ahamed ◽

Sujan Banik ◽

Mohammad Salim Hossain

Keyword(s):

Drug Release ◽

Sustained Release ◽

Release Kinetics ◽

In Vitro Release ◽

Methyl Cellulose ◽

Matrix Tablets ◽

Losartan Potassium ◽

Matrix Tablet ◽

Vitro Release

The present study was undertaken to develop sustained release (SR) matrix tablets of Losartan potassium, an angiotensin-II antagonist for the treatment of hypertension. The tablets were prepared by direct compression method along with Kollidon SR and Methyl Cellulose as release retardant polymers. The evaluation involves two stages- the physical properties studies of tablets and in vitro release kinetics assessment. The USP paddle method was selected to perform the dissolution test and 900 ml phosphate buffer of pH 6.8 was used as dissolution medium at 50 rpm at 370C. The release kinetics were analyzed. All the formulations followed Higuchi release kinetics. When the release data was plotted into Korsmeyer-Peppas equation, then it was confirmed that F-1, F-2, F-3, F-4 and F-5 exhibited non-fickian type drug release whereas F-6 exhibited fickian type drug release from the tablet matrix. The in-vitro release studies revealed that the formulation F-2 can be taken as an ideal or optimized formulation of sustained release tablets for 24 hours release as it fulfills all the requirements for sustained release tablet. Furthermore, when the tablets were preheated at different temperature (300C, 450C, 600C) before dissolution they showed decrease in drug release compared with ambient temperature DOI: http://dx.doi.org/10.3329/bpj.v16i2.22301 Bangladesh Pharmaceutical Journal 16(2): 177-183, 2013

Download Full-text

Formulation and In vitro Release Characterization of Metoprolol Succinate Extended Release Tablets

International Journal of Pharmaceutical Sciences and Nanotechnology ◽

10.37285/ijpsn.2011.4.4.3 ◽

2012 ◽

Vol 4 (4) ◽

pp. 1537-1543

Author(s):

Sakthikumar T ◽

Rajendran N N ◽

Natarajan R

Keyword(s):

Drug Release ◽

Extended Release ◽

In Vitro Release ◽

Methyl Cellulose ◽

Wet Granulation ◽

Direct Compression ◽

Metoprolol Succinate ◽

Extended Release Formulations ◽

Vitro Release

The present study was aimed to develop an extended release tablet of metoprolol Succinate for the treatment of hypertension. Four extended release formulations F1-F4 were developed using varying proportions of hydroxylpropyl-methylcellulose K100M, sodium carboxy methyl cellulose and Eudragit L30 D55 by wet granulation. Five extended release formulations F5-F9 containing HPMC K100M and HPMC 5 cps in varying concentration were developed by direct compression. The physicochemical and in vitro release characteristics of all the formulations were investigated and compared. Two formulations, F7 and F8 have shown not more 25% drug release in 1st h, 20%-40% drug release at 4th hour, 40%-60% drug release at 8th hour and not less than 80% at 20th hour and the release pattern conform with USP specification for 24 hours extended release formulation. It can be conclusively stated that optimum concentration of HPMC K100M (58%-65%) by direct compression method can yield an extended release of metoprolol succinate for 24 hours.

Download Full-text

Preparation and in vitro Evaluation of Bioadhesive Microparticulate System

International Journal of Pharmaceutical Sciences and Nanotechnology ◽

10.37285/ijpsn.2008.1.3.9 ◽

1970 ◽

Vol 1 (3) ◽

pp. 257-266

Author(s):

Nagda C. D. ◽

Chotai N. P. ◽

Patel S. B. ◽

Soni T. J ◽

Patel U. L

Keyword(s):

Drug Loading ◽

In Vitro Release ◽

Phenyl Acetic Acid ◽

Solvent Evaporation Method ◽

Elimination Half ◽

Release Studies ◽

Differential Scanning Colorimetry ◽

Polymer Interactions ◽

Vitro Release

Aceclofenac (ACE) is NSAIDs of a phenyl acetic acid class. It is indicated in arthritis and osteoarthritis, rheumatoid arthritis, ankylosing spondylitis. It has short elimination half life of 4 hours. The objective of the study is to design, characterize and evaluate bioadhesive microspheres of ACE employing carbopol (CP) as bioadhesive polymer. Bioadhesive microspheres of ACE were prepared by solvent evaporation method. The prepared microspheres were free flowing and spherical in shape and characterized for drug loading, mucoadhesion test, infrared spectroscopy (IR), differential scanning colorimetry (DSC) and scanning electron microscopy (SEM). The in-vitro release studies were performed using pH 6.8 phosphate buffer. The drug loaded microspheres in a ratio of 1:5 showed 47% of drug entrapment; percentage mucoadhesion was 81% and 89% release in 10 h. The infrared spectra and DSC showed stable character of aceclofenac in the drug loaded microspheres and revealed the absence of drug-polymer interactions. SEM studies showed that the microspheres are spherical and porous in nature. The in vitro release profiles from microspheres of different polymer-drug ratios followed Higuchi model.

Download Full-text

Clinoptilolite Microparticles as Carriers of Catechin-Rich Acacia Catechu Extracts: Microencapsulation and In Vitro Release Study

Molecules ◽

10.3390/molecules26061655 ◽

2021 ◽

Vol 26 (6) ◽

pp. 1655

Author(s):

Zvezdelina Yaneva ◽

Donika Ivanova ◽

Nikolay Popov

Keyword(s):

Composite System ◽

Release Kinetics ◽

Spectral Characteristics ◽

In Vitro Release ◽

Medium Ph ◽

Release Capacity ◽

Bioactive Substance ◽

Acacia Catechu ◽

Vitro Release

The main goal of the present study was to investigate the microencapsulation, in vitro release capacity and efficiency of catechin-rich Acacia catechu extract by Clinosorbent-5 (CLS-5) microparticles by in-depth detailed analyses and mathematical modelling of the encapsulation and in vitro release kinetics behaviour of the polyphenol-mineral composite system. The bioflavanol encapsulation and release efficiency on/from the mineral matrix were assessed by sorption experiments and interpretative modelling of the experimental data. The surface and spectral characteristics of the natural bioactive substance and the inorganic microcarrier were determined by Fourier Transform Infrared Spectroscopy (FTIR) and Ultraviolet/Visible (UV/Vis) spectrophotometric analyses. The maximum extent of catechin microencapsulation in acidic medium was 32%. The in vitro release kinetics study in simulated enzyme-free gastric medium (pH = 1.2) approved 88% maximum release efficiency achieved after 24 h. The in vitro release profile displayed that the developed bioflavanol/clinoptilolite microcarrier system provided sustained catechin in vitro release behaviour without an initial burst effect. Thus, the results from the present study are essential for the design and development of innovative catechin-CLS-5 microcarrier systems for application in human and veterinary medicine.

Download Full-text