scholarly journals Antibiofilm Effects of Nanoparticles and Visible Light Illumination Against Listeria monocytogenes

2021 ◽  
Vol 12 ◽  
Author(s):  
Sanna Puranen ◽  
Kati Riekkinen ◽  
Jenni Korhonen
Keyword(s):  
Stainless Steel ◽  
Listeria Monocytogenes ◽  
Food Safety ◽  
Visible Light ◽  
Food Processing ◽  
Biofilm Formation ◽  
Plate Count ◽  
Light Illumination ◽  
Visible Light Illumination ◽  
Aluminum Plates

Listeria monocytogenes bacteria pose a particular risk to the food industry as the species is known to form biofilm and to survive in a wide range of challenging environmental conditions. L. monocytogenes can cause listeriosis, a serious food-borne disease, and effective and safe antibiofilm materials and sanitary methods for food processing environments are intensively sought. A variety of nanoparticle materials have been recognized as safe to use in food environments, which allows the application of nanomaterials also for food safety purposes. Nanoparticles together with light illumination generate reactive oxygen species which inactivate bacteria by breaking down cell membranes, proteins, and DNA. The main objective of this study was to evaluate the efficacy of nanomaterials and blue light illumination for L. monocytogenes ATCC 7644 biofilm inactivation. Biofilm was allowed to form for 72 h on nanocoated stainless steel and aluminum plates, after which the plates were illuminated. Non-coated control plates were used to evaluate the antibiofilm efficacy of nanocoating. Plate count method was used to evaluate bacteria counts after illumination. Nanocoating did not affect initial biofilm formation compared to the control plates. Biofilm was significantly (p < 0.05) reduced on stainless steel, aluminum, and TiO2-coated aluminum plates after 72-h illumination by 1.9, 3.2, and 5.9 log, respectively. Nanocoating with visible light illumination could be an effective and safe method for enhancing food safety in food processing facilities to control biofilm formation. Evidence of antibiofilm properties of nanomaterials together with visible light illumination is limited; hence, future studies with variable light intensities and nanomaterials are needed.

Growth of Listeria monocytogenes as a Biofilm on Various Food-Processing Surfaces

1996 ◽  
Vol 59 (8) ◽  
pp. 827-831 ◽  
Author(s):  
ISABEL C. BLACKMAN ◽  
JOSEPH F. FRANK
Keyword(s):  
Stainless Steel ◽  
Listeria Monocytogenes ◽  
Food Processing ◽  
Biofilm Formation ◽  
Minimal Medium ◽  
Processing Plant ◽  
Biofilm Growth ◽  
Sanitary Condition ◽  
Plant Environment ◽  
Substantial Risk

The objective of this research was to determine the ability of Listeria monocytogenes to grow as a biofilm on various food-processing surfaces including stainless steel, Teflon®, nylon, and polyester floor sealant. Each of these surfaces was able to support biofilm formation when incubation was at 21°C in Trypticase soy broth (TSB). Biofilm formation was greatest on polyester floor sealant (40% of surface area covered after 7 days of incubation) and least on nylon (3% coverage). The use of chemically defined minimal medium resulted in a lack of biofilm formation on polyester floor sealant, and reduced biofilm levels on stainless steel. Biofilm formation was reduced with incubation at 10°C, but Teflon® and stainless steel still allowed 23 to 24% coverage after incubation in TSB for 18 days. Biofilm growth of L. monocytogenes was sufficient to provide a substantial risk of this pathogen contaminating the food-processing plant environment if wet surfaces are not maintained in a sanitary condition.

Morphological Change and Decreasing Transfer Rate of Biofilm-Featured Listeria monocytogenes EGDe

2017 ◽  
Vol 80 (3) ◽  
pp. 368-375 ◽  
Author(s):  
Yuejia Lee ◽  
Chinling Wang
Keyword(s):  
Stainless Steel ◽  
Listeria Monocytogenes ◽  
Food Processing ◽  
Biofilm Formation ◽  
Transfer Rate ◽  
Initial Level ◽  
Foodborne Pathogen ◽  
Bacterial Growth Rate ◽  
Biofilm Development ◽  
Food Processing Environment

ABSTRACT Listeria monocytogenes, a lethal foodborne pathogen, has the ability to resist the hostile food processing environment and thus frequently contaminates ready-to-eat foods during processing. It is commonly accepted that the tendency of L. monocytogenes' to generate biofilms on various surfaces enhances its resistance to the harshness of the food processing environment. However, the role of biofilm formation in the transferability of L. monocytogenes EGDe remains controversial. We examined the growth of Listeria biofilms on stainless steel surfaces and their effect on the transferability of L. monocytogenes EGDe. The experiments were a factorial 2 × 2 design with at least three biological replicates. Through scanning electron microscopy, a mature biofilm with intensive aggregates of cells was observed on the surface of stainless steel after 3 or 5 days of incubation, depending on the initial level of inoculation. During biofilm development, L. monocytogenes EGDe carried out binary fission vigorously before a mature biofilm was formed and subsequently changed its cellular morphology from rod shaped to sphere shaped. Furthermore, static biofilm, which was formed after 3 days of incubation at 25°C, significantly inhibited the transfer rate of L. monocytogenes EGDe from stainless steel blades to 15 bologna slices. During 7 days of storage at 4°C, however, bacterial growth rate was not significantly impacted by whether bacteria were transferred from biofilm and the initial concentrations of transferred bacteria on the slice. In conclusion, this study is the first to report a distinct change in morphology of L. monocytogenes EGDe at the late stage of biofilm formation. More importantly, once food is contaminated by L. monocytogenes EGDe, contamination proceeds independently of biofilm development and the initial level of contamination when food is stored at 4°C, even if contamination with L. monocytogenes EGDe was initially undetectable before storage.

Photoelectrocatalytic Oxidation of Organics Under Visible Light Illumination: A Short Review

2015 ◽  
Vol 19 (6) ◽  
pp. 512-520 ◽  
Author(s):  
Nikolaos Karanasios ◽  
Jenia Georgieva ◽  
Eugenia Valova ◽  
Stephan Armyanov ◽  
Georgios Litsardakis ◽  
...  
Keyword(s):  
Visible Light ◽  
Short Review ◽  
Light Illumination ◽  
Photoelectrocatalytic Oxidation ◽  
Visible Light Illumination ◽  
Oxidation Of Organics

Biofilm Formation and Associated Genes in Listeria Monocytogenes

2017 ◽  
Vol 12 (3) ◽  
Author(s):  
S. R. Warke ◽  
V. C. Ingle ◽  
N. V. Kurkure ◽  
P. A. Tembhurne ◽  
Minakshi Prasad ◽  
...  
Keyword(s):  
Public Health ◽  
Listeria Monocytogenes ◽  
Multiplex Pcr ◽  
Food Processing ◽  
Biofilm Formation ◽  
Milk Samples ◽  
Biofilm Production ◽  
Food Borne ◽  
Serious Infections ◽  
Microtiter Assay

Listeria monocytogenes, an opportunistic food borne pathogen can cause serious infections in immunocompromised individuals. L. monocytogenes is capable of producing biofilm on the surface of food processing lines and instruments.The biofilm transfers contamination to food products and impose risk to public health. In the present study biofilm producing ability of L. monocytogenes isolates were investigated phenotypically and genotypically by microtiter assay and multiplex PCR, respectively. Out of 38 L. monocytogenes isolates 14 were recovered from animal clinical cases, 12 bovine environment and 12 from milk samples. A total of 3 (21.42%) clinical, 2 (16.66%) environment and 3 (25%) milk samples respectively, revealed biofilm production in microtiter assay. Cumulative results showed that 23 (60.52%) out of 38 strains of L. monocytogenes were positive for luxS and flaA gene and 1 (2.63%) was positive only for the flaA gene.

scholarly journals Enhanced Visible-Light Photocatalytic Performance of SAPO-5-Based g-C3N4 Composite for Rhodamine B (RhB) Degradation

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3948
Author(s):  
Lingfang Qiu ◽  
Zhiwei Zhou ◽  
Mengfan Ma ◽  
Ping Li ◽  
Jinyong Lu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Redox Reactions ◽  
Photocatalytic Performance ◽  
Dye Degradation ◽  
Thermal Polymerization ◽  
Light Illumination ◽  
Electron Hole ◽  
Visible Light Illumination ◽  
Visible Light Photocatalytic

Novel visible-light responded aluminosilicophosphate-5 (SAPO-5)/g-C3N4 composite has been easily constructed by thermal polymerization for the mixture of SAPO-5, NH4Cl, and dicyandiamide. The photocatalytic activity of SAPO-5/g-C3N4 is evaluated by degrading RhB (30 mg/L) under visible light illumination (λ > 420 nm). The effects of SAPO-5 incorporation proportion and initial RhB concentration on the photocatalytic performance have been discussed in detail. The optimized SAPO-5/g-C3N4 composite shows promising degradation efficiency which is 40.6% higher than that of pure g-C3N4. The degradation rate improves from 0.007 min−1 to 0.022 min−1, which is a comparable photocatalytic performance compared with other g-C3N4-based heterojunctions for dye degradation. The migration of photo-induced electrons from g-C3N4 to the Al site of SAPO-5 should promote the photo-induced electron-hole pairs separation rate of g-C3N4 efficiently. Furthermore, the redox reactions for RhB degradation occur on the photo-induced holes in the g-C3N4 and Al sites in SAPO-5, respectively. This achievement not only improves the photocatalytic activity of g-C3N4 efficiently, but also broadens the application of SAPOs in the photocatalytic field.

scholarly journals Hybrid ZnO/MoS2 Core/Sheath Heterostructures for Photoelectrochemical Water Splitting

Applied Nano ◽  
2021 ◽  
Vol 2 (3) ◽  
pp. 148-161
Author(s):  
Katerina Govatsi ◽  
Aspasia Antonelou ◽  
Labrini Sygellou ◽  
Stylianos G. Neophytides ◽  
Spyros N. Yannopoulos
Keyword(s):  
Visible Light ◽  
Wide Band ◽  
Nanowire Arrays ◽  
Maximum Efficiency ◽  
Light Illumination ◽  
Wide Band Gap ◽  
Long Term Stability ◽  
Visible Light Illumination ◽  
Nanowire Surface ◽  
Wide Range

The rational synthesis of semiconducting materials with enhanced photoelectrocatalytic efficiency under visible light illumination is a long-standing issue. ZnO has been systematically explored in this field, as it offers the feasibility to grow a wide range of nanocrystal morphology; however, its wide band gap precludes visible light absorption. We report on a novel method for the controlled growth of semiconductor heterostructures and, in particular, core/sheath ZnO/MoS2 nanowire arrays and the evaluation of their photoelectrochemical efficiency in oxygen evolution reaction. ZnO nanowire arrays, with a narrow distribution of nanowire diameters, were grown on FTO substrates by chemical bath deposition. Layers of Mo metal at various thicknesses were sputtered on the nanowire surface, and the Mo layers were sulfurized at low temperature, providing in a controlled way few layers of MoS2, in the range from one to three monolayers. The heterostructures were characterized by electron microscopy (SEM, TEM) and spectroscopy (XPS, Raman, PL). The photoelectrochemical properties of the heterostructures were found to depend on the thickness of the pre-deposited Mo film, exhibiting maximum efficiency for moderate values of Mo film thickness. Long-term stability, in relation to similar heterostructures in the literature, has been observed.

Sign in / Sign up

Export Citation Format

Share Document