scholarly journals Dose Prediction Using a Three-Dimensional Convolutional Neural Network for Nasopharyngeal Carcinoma With Tomotherapy

2021 ◽  
Vol 11 ◽  
Author(s):  
Yaoying Liu ◽  
Zhaocai Chen ◽  
Jinyuan Wang ◽  
Xiaoshen Wang ◽  
Baolin Qu ◽  
...  
Keyword(s):  
Neural Network ◽  
Nasopharyngeal Carcinoma ◽  
Prediction Model ◽  
Convolutional Neural Network ◽  
Patch Size ◽  
Organs At Risk ◽  
Whole Body ◽  
Patient Specific ◽  
Dose Prediction ◽  
The Mean

PurposeThis study focused on predicting 3D dose distribution at high precision and generated the prediction methods for nasopharyngeal carcinoma patients (NPC) treated with Tomotherapy based on the patient-specific gap between organs at risk (OARs) and planning target volumes (PTVs).MethodsA convolutional neural network (CNN) is trained using the CT and contour masks as the input and dose distributions as output. The CNN is based on the “3D Dense-U-Net”, which combines the U-Net and the Dense-Net. To evaluate the model, we retrospectively used 124 NPC patients treated with Tomotherapy, in which 96 and 28 patients were randomly split and used for model training and test, respectively. We performed comparison studies using different training matrix shapes and dimensions for the CNN models, i.e., 128 ×128 ×48 (for Model I), 128 ×128 ×16 (for Model II), and 2D Dense U-Net (for Model III). The performance of these models was quantitatively evaluated using clinically relevant metrics and statistical analysis.ResultsWe found a more considerable height of the training patch size yields a better model outcome. The study calculated the corresponding errors by comparing the predicted dose with the ground truth. The mean deviations from the mean and maximum doses of PTVs and OARs were 2.42 and 2.93%. Error for the maximum dose of right optic nerves in Model I was 4.87 ± 6.88%, compared with 7.9 ± 6.8% in Model II (p=0.08) and 13.85 ± 10.97% in Model III (p<0.01); the Model I performed the best. The gamma passing rates of PTV60 for 3%/3 mm criteria was 83.6 ± 5.2% in Model I, compared with 75.9 ± 5.5% in Model II (p<0.001) and 77.2 ± 7.3% in Model III (p<0.01); the Model I also gave the best outcome. The prediction error of D95 for PTV60 was 0.64 ± 0.68% in Model I, compared with 2.04 ± 1.38% in Model II (p<0.01) and 1.05 ± 0.96% in Model III (p=0.01); the Model I was also the best one.ConclusionsIt is significant to train the dose prediction model by exploiting deep-learning techniques with various clinical logic concepts. Increasing the height (Y direction) of training patch size can improve the dose prediction accuracy of tiny OARs and the whole body. Our dose prediction network model provides a clinically acceptable result and a training strategy for a dose prediction model. It should be helpful to build automatic Tomotherapy planning.

Pencarian Question-Answer Menggunakan Convolutional Neural Network Pada Topik Agama Berbahasa Indonesia

2018 ◽  
Vol 10 (1) ◽  
pp. 57-64 ◽  
Author(s):  
Rizqa Raaiqa Bintana ◽  
Chastine Fatichah ◽  
Diana Purwitasari
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Question Answering ◽  
Mean Average Precision ◽  
Average Precision ◽  
Community Based ◽  
Network Methods ◽  
The Mean ◽  
Index Terms ◽  
Search Information

Community-based question answering (CQA) is formed to help people who search information that they need through a community. One condition that may occurs in CQA is when people cannot obtain the information that they need, thus they will post a new question. This condition can cause CQA archive increased because of duplicated questions. Therefore, it becomes important problems to find semantically similar questions from CQA archive towards a new question. In this study, we use convolutional neural network methods for semantic modeling of sentence to obtain words that they represent the content of documents and new question. The result for the process of finding the same question semantically to a new question (query) from the question-answer documents archive using the convolutional neural network method, obtained the mean average precision value is 0,422. Whereas by using vector space model, as a comparison, obtained mean average precision value is 0,282. Index Terms—community-based question answering, convolutional neural network, question retrieval

scholarly journals Geometric property-based convolutional neural network for indoor object detection

2021 ◽  
Vol 18 (1) ◽  
pp. 172988142199332
Author(s):  
Xintao Ding ◽  
Boquan Li ◽  
Jinbao Wang
Keyword(s):  
Neural Network ◽  
Object Detection ◽  
Convolutional Neural Network ◽  
Geometric Property ◽  
Ground Truth ◽  
Geometric Constraints ◽  
Depth Information ◽  
Training Set ◽  
Object Knowledge ◽  
The Mean

Indoor object detection is a very demanding and important task for robot applications. Object knowledge, such as two-dimensional (2D) shape and depth information, may be helpful for detection. In this article, we focus on region-based convolutional neural network (CNN) detector and propose a geometric property-based Faster R-CNN method (GP-Faster) for indoor object detection. GP-Faster incorporates geometric property in Faster R-CNN to improve the detection performance. In detail, we first use mesh grids that are the intersections of direct and inverse proportion functions to generate appropriate anchors for indoor objects. After the anchors are regressed to the regions of interest produced by a region proposal network (RPN-RoIs), we then use 2D geometric constraints to refine the RPN-RoIs, in which the 2D constraint of every classification is a convex hull region enclosing the width and height coordinates of the ground-truth boxes on the training set. Comparison experiments are implemented on two indoor datasets SUN2012 and NYUv2. Since the depth information is available in NYUv2, we involve depth constraints in GP-Faster and propose 3D geometric property-based Faster R-CNN (DGP-Faster) on NYUv2. The experimental results show that both GP-Faster and DGP-Faster increase the performance of the mean average precision.

scholarly journals Forecast Model of TV Show Rating Based on Convolutional Neural Network

Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Lingfeng Wang
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Prediction Model ◽  
Convolutional Neural Network ◽  
Network Structure ◽  
Rating Data ◽  
Tv Program ◽  
Neural Network Structure ◽  
Rating Prediction ◽  
Tv Show

The TV show rating analysis and prediction system can collect and transmit information more quickly and quickly upload the information to the database. The convolutional neural network is a multilayer neural network structure that simulates the operating mechanism of biological vision systems. It is a neural network composed of multiple convolutional layers and downsampling layers sequentially connected. It can obtain useful feature descriptions from original data and is an effective method to extract features from data. At present, convolutional neural networks have become a research hotspot in speech recognition, image recognition and classification, natural language processing, and other fields and have been widely and successfully applied in these fields. Therefore, this paper introduces the convolutional neural network structure to predict the TV program rating data. First, it briefly introduces artificial neural networks and deep learning methods and focuses on the algorithm principles of convolutional neural networks and support vector machines. Then, we improve the convolutional neural network to fit the TV program rating data and finally apply the two prediction models to the TV program rating data prediction. We improve the convolutional neural network TV program rating prediction model and combine the advantages of the convolutional neural network to extract effective features and good classification and prediction capabilities to improve the prediction accuracy. Through simulation comparison, we verify the feasibility and effectiveness of the TV program rating prediction model given in this article.

scholarly journals Automatic Design System with Generative Adversarial Network and Convolutional Neural Network for Optimization Design of Interior Permanent Magnet Synchronous Motor

2021 ◽  
Author(s):  
Yuki Shimizu ◽  
Shigeo Morimoto ◽  
Masayuki Sanada ◽  
Yukinori Inoue
Keyword(s):  
Neural Network ◽  
Prediction Model ◽  
Convolutional Neural Network ◽  
Permanent Magnet ◽  
Optimization Design ◽  
Design System ◽  
Automatic Design ◽  
Wide Range ◽  
Interior Permanent Magnet ◽  
Long Time

The optimal design of interior permanent magnet synchronous motors requires a long time because finite element analysis (FEA) is performed repeatedly. To solve this problem, many researchers have used artificial intelligence to construct a prediction model that can replace FEA. However, because the training data are generated by FEA, it takes a very long time to obtain a sufficient amount of data, making it impossible to train a large-scale prediction model. Here, we propose a method for generating a large amount of data from a small number of FEA results using machine learning. An automatic design system with a deep generative model and a convolutional neural network is then constructed. With its sufficient data, the proposed system can handle three topologies and three motor parameters in a wide range of current vector regions. The proposed system was applied to multi-objective optimization design, with the optimization completed in 13-15 seconds.

scholarly journals Automatic Design System with Generative Adversarial Network and Convolutional Neural Network for Optimization Design of Interior Permanent Magnet Synchronous Motor

2021 ◽  
Author(s):  
Yuki Shimizu ◽  
Shigeo Morimoto ◽  
Masayuki Sanada ◽  
Yukinori Inoue
Keyword(s):  
Neural Network ◽  
Prediction Model ◽  
Convolutional Neural Network ◽  
Permanent Magnet ◽  
Optimization Design ◽  
Design System ◽  
Automatic Design ◽  
Wide Range ◽  
Interior Permanent Magnet ◽  
Long Time

The optimal design of interior permanent magnet synchronous motors requires a long time because finite element analysis (FEA) is performed repeatedly. To solve this problem, many researchers have used artificial intelligence to construct a prediction model that can replace FEA. However, because the training data are generated by FEA, it takes a very long time to obtain a sufficient amount of data, making it impossible to train a large-scale prediction model. Here, we propose a method for generating a large amount of data from a small number of FEA results using machine learning. An automatic design system with a deep generative model and a convolutional neural network is then constructed. With its sufficient data, the proposed system can handle three topologies and three motor parameters in a wide range of current vector regions. The proposed system was applied to multi-objective optimization design, with the optimization completed in 13-15 seconds.

scholarly journals Synthesis of Patient-Specific Transmission Data for PET Attenuation Correction for PET/MRI Neuroimaging Using a Convolutional Neural Network

2018 ◽  
Vol 60 (4) ◽  
pp. 555-560 ◽  
Author(s):  
Karl D. Spuhler ◽  
John Gardus ◽  
Yi Gao ◽  
Christine DeLorenzo ◽  
Ramin Parsey ◽  
...  
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Attenuation Correction ◽  
Patient Specific ◽  
Transmission Data

scholarly journals Research on improved convolutional wavelet neural network

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jingwei Liu ◽  
Peixuan Li ◽  
Xuehan Tang ◽  
Jiaxin Li ◽  
Jiaming Chen
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Radial Basis Function ◽  
Error Rate ◽  
Basis Function ◽  
Activation Function ◽  
Wavelet Neural Network ◽  
Mean Square ◽  
The Mean

AbstractArtificial neural networks (ANN) which include deep learning neural networks (DNN) have problems such as the local minimal problem of Back propagation neural network (BPNN), the unstable problem of Radial basis function neural network (RBFNN) and the limited maximum precision problem of Convolutional neural network (CNN). Performance (training speed, precision, etc.) of BPNN, RBFNN and CNN are expected to be improved. Main works are as follows: Firstly, based on existing BPNN and RBFNN, Wavelet neural network (WNN) is implemented in order to get better performance for further improving CNN. WNN adopts the network structure of BPNN in order to get faster training speed. WNN adopts the wavelet function as an activation function, whose form is similar to the radial basis function of RBFNN, in order to solve the local minimum problem. Secondly, WNN-based Convolutional wavelet neural network (CWNN) method is proposed, in which the fully connected layers (FCL) of CNN is replaced by WNN. Thirdly, comparative simulations based on MNIST and CIFAR-10 datasets among the discussed methods of BPNN, RBFNN, CNN and CWNN are implemented and analyzed. Fourthly, the wavelet-based Convolutional Neural Network (WCNN) is proposed, where the wavelet transformation is adopted as the activation function in Convolutional Pool Neural Network (CPNN) of CNN. Fifthly, simulations based on CWNN are implemented and analyzed on the MNIST dataset. Effects are as follows: Firstly, WNN can solve the problems of BPNN and RBFNN and have better performance. Secondly, the proposed CWNN can reduce the mean square error and the error rate of CNN, which means CWNN has better maximum precision than CNN. Thirdly, the proposed WCNN can reduce the mean square error and the error rate of CWNN, which means WCNN has better maximum precision than CWNN.

Sign in / Sign up

Export Citation Format

Share Document