scholarly journals Study on Multi-Objective Optimization-Based Climate Responsive Design of Residential Building

Algorithms ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 238
Author(s):  
Zhixing Li ◽  
Paolo Vincenzo Genovese ◽  
Yafei Zhao
Keyword(s):  
Energy Demand ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Optimal Solution ◽  
Residential Building ◽  
The Public ◽  
Private Households ◽  
Design Variables ◽  
Global Cost ◽  
Responsive Design

This paper proposes an optimization process based on a parametric platform for building climate responsive design. Taking residential buildings in six typical American cities as examples, it proposes thermal environment comfort (Discomfort Hour, DH), building energy demand (BED) and building global cost (GC) as the objective functions for optimization. The design variables concern building orientation, envelope components, and window types, etc. The optimal solution is provided from two different perspectives of the public sector (energy saving optimal) and private households (cost-optimal) respectively. By comparing the optimization results with the performance indicators of the reference buildings in various cities, the outcome can give the precious indications to rebuild the U.S. residential buildings with a view to energy-efficiency and cost optimality depending on the location.

scholarly journals The use of multi-criteria optimization to choose solutions for energy-efficient buildings

2017 ◽  
Vol 65 (6) ◽  
pp. 815-826 ◽  
Author(s):  
M. Basińska
Keyword(s):  
Energy Demand ◽  
Residential Buildings ◽  
Optimal Solution ◽  
Primary Energy ◽  
Building Envelope ◽  
Technical Equipment ◽  
Energy Index ◽  
Global Cost ◽  
Technical Solutions ◽  
Installation Technology

AbstractThe goal of this paper was to optimize the building envelope and technical equipment in the building through the mitigation of the global cost value, and then to evaluate the influence of the chosen assumptions on the primary energy index. The analyses carried out using global cost method allow for finding the cost optimal solution but only for the some range of primary energy index variability. In order to find the optimal solutions it was proposed to use the multi-criteria optimisation, assuming the following as basic criteria: a global cost value and investment prices increase (economic criteria), a primary energy index (energy-related criterion), an emission of carbon dioxide (environmental criterion). The analysed case study refers to the technical solutions for the residential buildings with the usable energy demand at the level of 40 and 15 kWh/m2/a. The presented method might be applied to different types of buildings: those being designed and those being the subject of the thermo-modernisation. The results demonstrate that the proposed model allows for classification of the alternative technical solutions regarding the designing process and the building’s technical equipment. The carried out analyses indicate the economic possibility to achieve the low energy building standard and show the need to concentrate the activities related to the installation technology and used energy source.

scholarly journals The Thermal Performance of Traditional Residential Buildings in Kathmandu Valley

2014 ◽  
Vol 10 (1) ◽  
pp. 172-183 ◽  
Author(s):  
Sushil B. Bajracharya
Keyword(s):  
Thermal Performance ◽  
Field Data ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Residential Building ◽  
Kathmandu Valley ◽  
Indoor Thermal Environment ◽  
Outdoor Thermal Environment ◽  
Different Seasons ◽  
Better Than

This paper seeks to investigate into the aspects of thermal performance of traditional residential buildings in traditional settlements of Kathmandu valley. This study proceeds to analyze the detailed field data collected, with a view to identify the indoor thermal environment with respect to outdoor thermal environment in different seasons. This paper also compares the thermal performance of traditional buildings with modern residential buildings of traditional settlements of the valley. There is a regression analysis to obtain information about the thermal environment of different traditional and modern residential buildings with different conditions. The paper concludes that, thermal performance of traditional residential building, adapted in various ways to the changing thermal regime for thermal comfort is better than that of contemporary buildings.DOI: http://dx.doi.org/10.3126/jie.v10i1.10898Journal of the Institute of Engineering, Vol. 10, No. 1, 2014,  pp. 172–183

scholarly journals LIFE CYCLE ASSESSMENT OF TECHNICAL BUILDING SERVICES OF LARGE RESIDENTIAL BUILDING STOCKS USING SEMANTIC 3D CITY MODELS

2020 ◽  
Vol VI-4/W1-2020 ◽  
pp. 85-92
Author(s):  
H. Harter ◽  
B. Willenborg ◽  
W. Lang ◽  
T. H. Kolbe
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Stock ◽  
3D City Models ◽  
Methodical Approach ◽  
Operational Energy ◽  
City Models

Abstract. Reducing the demand for non-renewable resources and the resulting environmental impact is an objective of sustainable development, to which buildings contribute significantly. In order to realize the goal of reaching a climate-neutral building stock, it must first be analyzed and evaluated in order to develop optimization strategies. The life cycle based consideration and assessment of buildings plays a key role in this process. Approaches and tools already exist for this purpose, but they mainly take the operational energy demand of buildings and not a life cycle based approach into account, especially when assessing technical building services (TBS). Therefore, this paper presents and applies a methodical approach for the life cycle based assessment of the TBS of large residential building stocks, based on semantic 3D city models (CityGML). The methodical approach developed for this purpose describes the procedure for calculating the operational energy demand (already validated) and the heating load of the building, the dimensioning of the TBS components and the calculation of the life cycle assessment. The application of the methodology is illustrated in a case study with over 115,000 residential buildings from Munich, Germany. The study shows that the methodology calculates reliable results and that a significant reduction of the life cycle based energy demand can be achieved by refurbishment measures/scenarios. Nevertheless, the goal of achieving a climate-neutral building stock is a challenge from a life cycle perspective.

scholarly journals Multi-Objective Techno-Economic Optimization of Design Parameters for Residential Buildings in Different Climate Zones

2021 ◽  
Vol 14 (1) ◽  
pp. 65
Author(s):  
Muhammad Usman ◽  
Georg Frey
Keyword(s):  
Thermal Load ◽  
Energy Demand ◽  
Residential Buildings ◽  
Optimal Solution ◽  
Building Envelope ◽  
Design Parameters ◽  
Base Case ◽  
Economic Optimization ◽  
Single Family ◽  
Climate Zones

The comprehensive approach for a building envelope design involves building performance simulations, which are time-consuming and require knowledge of complicated processes. In addition, climate variation makes the selection of these parameters more complex. The paper aims to establish guidelines for determining a single-family household’s unique optimal passive design in various climate zones worldwide. For this purpose, a bi-objective optimization is performed for twenty-four locations in twenty climates by coupling TRNSYS and a non-dominated sorting genetic algorithm (NSGA-III) using the Python program. The optimization process generates Pareto fronts of thermal load and investment cost to identify the optimum design options for the insulation level of the envelope, window aperture for passive cooling, window-to-wall ratio (WWR), shading fraction, radiation-based shading control, and building orientation. The goal is to find a feasible trade-off between thermal energy demand and the cost of thermal insulation. This is achieved using multi-criteria decision making (MCDM) through criteria importance using intercriteria correlation (CRITIC) and the technique for order preference by similarity to ideal solution (TOPSIS). The results demonstrate that an optimal envelope design remarkably improves the thermal load compared to the base case of previous envelope design practices. However, the weather conditions strongly influence the design parameters. The research findings set a benchmark for energy-efficient household envelopes in the investigated climates. The optimal solution sets also provide a criterion for selecting the ranges of envelope design parameters according to the space heating and cooling demands of the climate zone.

scholarly journals Energy efficiency and economic analysis of retrofit measures for single-family residential buildings

2019 ◽  
Vol 23 (3 Part B) ◽  
pp. 2071-2084 ◽  
Author(s):  
Norbert Harmathy ◽  
Danijela Urbancl ◽  
Darko Goricanec ◽  
Zoltán Magyar
Keyword(s):  
Energy Efficiency ◽  
Economic Evaluation ◽  
Low Temperature ◽  
Economic Analysis ◽  
Energy Demand ◽  
Residential Buildings ◽  
Residential Building ◽  
Expanded Polystyrene ◽  
Temperate Climate ◽  
Single Family

The research elaborates various solutions using detailed economic evaluation and energy efficiency calculation and simulation technology for formulating applicable, energy and cost-efficient retrofit solutions of single-family residential buildings located in temperate climate areas. Primarily the annual energy demand for a reference existing single-family residential building was determined. The economic analysis was performed for six formulated refurbishment scenarios in order to determine which of the scenarios will demonstrate optimal performance both in energy and cost efficiency. A feasibility study was performed for the most efficient scenario, which included an economic evaluation of low temperature radiant heating systems were three energy suppliers (oil, natural gas and electricity for air to water heat pump) were compared. According to financial analyses the optimal scenario includes the replacement of windows, installation of 15 cm expanded polystyrene thermal insulation, low temperature radiant floor heating, with a payback period of ten years.

scholarly journals Numerical Analysis of a Residential Energy System that Integrates Hybrid Solar Modules (PVT) with a Heat Pump

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 96
Author(s):  
Len Rijvers ◽  
Camilo Rindt ◽  
Corry de Keizer
Keyword(s):  
Heat Pump ◽  
System Performance ◽  
Energy Demand ◽  
Residential Buildings ◽  
Residential Building ◽  
Weather Conditions ◽  
Initial Step ◽  
Energy System ◽  
System Parameters ◽  
Energetic Performance

Photovoltaic-thermal (PVT) collectors are hybrid solar collectors that convert solar and ambient energy into thermal and electrical energy. Integrated PVT-HP, in which PVT collectors are combined with a heat pump, offers an efficient and renewable option to replace conventional fossil fuel-based energy systems in residential buildings. Currently, system concepts in which the selection, design and control of the components are aligned towards the system performance are lacking. The development of a system model enables the comparison of a variety of system parameters and system designs, informed decision making based on the energetic performance and the market diffusion of PVT-HP systems. This contribution presents a simulation model of a PVT-HP system. By means of numerical simulations, with simulation program TRNSYS, the energetic performance of a PVT-HP system and the system components are investigated. It is shown that the PVT-HP can cover the annual energy demand of a residential building. The corresponding Seasonal Performance Factor (SPF) is equal to 3.6. Furthermore, the effect of varying weather conditions, occupancy and building orientations on the performance of the reference system is analyzed. The SPF for the investigated scenarios varies between 3.0 and 3.9. Lastly, two system parameters, the PVT collector area, and the PVT collector type are varied as an initial step in the optimization of the system performance. To sum up, the presented PVT-HP model is suitable for dynamic system simulation and the exploration of the system concepts. The simulation study shows that a PVT-HP system can cover the annual energy demand of a residential building. Lastly, parametric variations showcase the optimization potential of PVT-HP systems.

scholarly journals Preliminary Investigation on the Use of Exhaust Fans in Dwellings and Their Impact on Energy Balance

Proceedings ◽  
2019 ◽  
Vol 23 (1) ◽  
pp. 8
Author(s):  
Jean Rouleau ◽  
Louis Gosselin
Keyword(s):  
Indoor Air ◽  
Energy Demand ◽  
Residential Buildings ◽  
Preliminary Investigation ◽  
Residential Building ◽  
Energy Performance ◽  
Measured Data ◽  
Quebec City ◽  
Energy Performance Of Buildings ◽  
Canada Data

Exhaust fans in residential buildings generate energy consumption first by the electricity that they require when operating, but also by extracting heat outside of the building. Nonetheless, these appliances are essential to ensure good indoor air quality. It is thus important to study how occupants in residential buildings use exhaust fans and to assess their impact on the energy performance of buildings. In this paper, a preliminary analysis on these two topics is made based on measured data recorded from a multi-residential building located in Quebec City, Canada. Data show that the use of exhaust fans is variable from a household to another. It was estimated that exhaust devices accounted for approximately 14% of the energy demand of the monitored building.

scholarly journals Comparative Analysis of Energy Demand and CO2 Emissions on Different Typologies of Residential Buildings in Europe

Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2436 ◽  
Author(s):  
Julià Coma ◽  
José Miguel Maldonado ◽  
Alvaro de Gracia ◽  
Toni Gimbernat ◽  
Teresa Botargues ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Co2 Emissions ◽  
Energy Demand ◽  
Residential Buildings ◽  
Residential Building ◽  
Cold Climate ◽  
Hot Water ◽  
Data Sources ◽  
Building Sector ◽  
Domestic Hot Water

The building sector accounts for one third of the global energy consumption and it is expected to grow in the next decades. This evidence leads researchers, engineers and architects to develop innovative technologies based on renewable energies and to enhance the thermal performance of building envelopes. In this context, the potential applicability and further energy performance analysis of these technologies when implemented into different building typologies and climate conditions are not easily comparable. Although massive information is available in data sources, the lack of standardized methods for data gathering and the non-public availability makes the comparative analyses more difficult. These facts limit the benchmarking of different building energy demand parameters such as space heating, cooling, air conditioning, domestic hot water, lighting and electric appliances. Therefore, the first objective of this study consists in providing a review about the common typologies of residential buildings in Europe from the main data sources. This study contains specific details on their architecture, building envelope, floor space and insulation properties. The second objective consists in performing a cross-country comparison in terms of energy demand for the applications with higher energy requirements in the residential building sector (heating and domestic hot water), as well as their related CO2 emissions. The approach of this comparative analysis is based on the residential building typology developed in TABULA/EPISCOPE projects. This comparative study provides a reference scenario in terms of energy demand and CO2 emissions for residential buildings and allows to evaluate the potential implementation of new supply energy technologies in hot, temperate and cold climate regions. From this study it was also concluded that there is a necessity of a free access database which could gather and classify reliable energy data in buildings.

Study on Energy-Saving Renovation of Existing Heating Masonry-Concrete Residential Buildings

2011 ◽  
Vol 280 ◽  
pp. 147-151 ◽  
Author(s):  
Hong Guo ◽  
Min Fang Su ◽  
Xiao Jun Jin
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Saving ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Envelope ◽  
Indoor Thermal Environment ◽  
Consumption Situation ◽  
Current Energy

Based on the current energy consumption situation of existing masonry-concrete residential buildings in China, it discussed the main energy-saving renovation policies and technologies. Taking existing masonry-concrete residential building of Taiyuan city as a case, it analyzed its heat loss situations, energy-saving renovation design and reconstruction technologies of building envelope. It discussed energy-saving renovation effects. Energy efficiency and indoor thermal environment improved significantly after energy-saving renovation. The building life is extended.

Green Retrofit Energy Efficiency Potential on Existing Building Envelope for Residential and Non-Residential Building

2021 ◽  
pp. 1227-1257
Author(s):  
Robert Staiger
Keyword(s):  
Energy Efficiency ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Residential Buildings ◽  
Ecological Impact ◽  
Residential Building ◽  
Building Envelope ◽  
Existing Building ◽  
Primary Energy Demand ◽  
Energy Efficiency Potential

The chapter deals with the green energetic consideration of today's building envelopes for residential and non-residential buildings. It investigates the energetic effects the envelopes have on energy efficiency, energy consumption, material use, sustainable use of resources, lifetime considerations, economic and ecological impact. Today's it is estimated that approximately 30% of the annual primary energy demand for residential and non-residential buildings is needed. Energy resources for heat, electricity, air conditioning and cooling purposes, fossil fuels in form of gas and liquid are predominantly used.

Sign in / Sign up

Export Citation Format

Share Document