scholarly journals Evolution of Seismic Site Classification According to the Criteria in Chilean Design Codes

2021 ◽  
Vol 11 (22) ◽  
pp. 10754
Author(s):  
Edgar Giovanny Diaz-Segura
Keyword(s):  
Seismic Design ◽  
Numerical Models ◽  
Site Classification ◽  
Design Codes ◽  
Design Code ◽  
Seismic Demands ◽  
Distinctive Features ◽  
The Usa ◽  
Soil Foundation ◽  
Lateral Heterogeneities

Design codes establish seismic site classifications to determine the seismic demand of a structure according to the response of the soil foundation under the action of earthquake ground motions; the site classification can even condition the feasibility of a project. The occurrence of great earthquakes in Chile has tested its design codes, generating much information and experience regarding the seismic design of structures that have allowed researchers to identify variations in seismic demands according to the kind of ground foundation and to propose seismic site classification methods in Chilean regulations since the 1930s; countries in the vanguard of seismic design, such as the USA, Japan, and New Zealand, proposed methods even earlier. In this document, the evolution of methodologies for seismic site classification according to the criteria in Chilean codes is analysed from their implementation in the 1930s to the most recently proposed design code NCh 433, 2018–2021. Although the distinctive features of each country shape the criteria in their design codes, clear knowledge of the evolution of established criteria from their origins is considered an important tool that contributes to the better understanding, interpretation and application of the seismic site classification methodologies contained in a design code with better criteria. Likewise, the review indicates a distinct need to conduct a continuous evaluation of the classification criteria supported by records of new earthquakes, as well as by physical and numerical models that allow incorporating variables which condition the response of the terrain such as topography, lateral heterogeneities, and basic effects.

A Comparative Study of Design Base Shear for RC Buildings in Selected Seismic Design Codes

2012 ◽  
Vol 28 (3) ◽  
pp. 1047-1070 ◽  
Author(s):  
Vijay Namdev Khose ◽  
Yogendra Singh ◽  
Dominik H. Lang
Keyword(s):  
Seismic Design ◽  
Response Spectrum ◽  
Cumulative Effect ◽  
Building Design ◽  
Site Classification ◽  
Eurocode 8 ◽  
Design Codes ◽  
Base Shear ◽  
Rc Buildings ◽  
Design Response Spectrum

Modern seismic building design codes tend to converge on issues of design methodology and the state-of-the-art. However, significant differences exist in basic provisions of various codes. This paper compares important provisions related to the seismic design of RC buildings in some of the major national seismic building codes viz. ASCE 7, Eurocode 8, NZS 1170.5, and IS 1893. Code provisions regarding the specification of hazard, site classification, design response spectrum, ductility classification, response reduction factors, and minimum design base shear are compared and their cumulative effect on design base shear is studied. The objective component of overstrength contributed by the material and load factors is considered to normalize the design base shear. It is observed that every code has merit over the other codes in some aspect. The presented discussion highlights the major areas of differences which need attention in the process of harmonization of different codes of the world.

scholarly journals A study on sensitivity of seismic site amplification factors to site conditions for bridges

2018 ◽  
Vol 51 (4) ◽  
pp. 197-211
Author(s):  
Muhammad Tariq A. Chaudhary
Keyword(s):  
Seismic Design ◽  
Site Amplification ◽  
Site Conditions ◽  
Design Codes ◽  
Design Code ◽  
Bridge Design ◽  
Site Class ◽  
Vibration Period ◽  
Amplification Factors ◽  
Site Classes

Seismic site amplification factors and seismic design spectra for bridges are influenced by site conditions that include geotechnical properties of soil strata as well as the geological setting. All modern seismic design codes recognize this fact and assign design spectral shapes based on site conditions or specify a 2-parameter model with site amplification factors as a function of site class, seismic intensity and vibration period (short and long). Design codes made a number of assumptions related to the site conditions while specifying the values of short (Fa) and long period (Fv) site amplification factors. Making these assumptions was necessary due to vast variation in site properties and limited availability of actual strong motion records on all site conditions and seismic setting in a region. This paper conducted a sensitivity analysis for site amplification factors for site classes C and D in the AASHTO bridge design code by performing a 1-D site response analysis in which values of site parameters like strata depth, travel-time averaged shear wave velocity in the top 30 m strata (Vs30), plasticity index (PI), impedance contrast ratio (ICR) and intensity of seismic ground motion were varied. The results were analyzed to identify the site parameters that impacted Fa and Fv values for site classes C and D. The computed Fa and Fv values were compared with the corresponding values in the AASHTO bridge design code and it was found that the code-based Fa and Fv values were generally underestimated and overestimated respectively.

scholarly journals Evaluation of Seismic Response Modification Factor (R) for Moderate-Rise RC Buildings with Vertical Irregular Configurations

2021 ◽  
Author(s):  
Momen Mohamed Ahmed ◽  
Mohamed Abdel-Basset Abdo ◽  
Waleed Abo El-Wafa Mohamed
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Numerical Models ◽  
Lateral Load ◽  
Design Stage ◽  
Design Codes ◽  
Rc Buildings ◽  
Response Modification Factor ◽  
Modification Factor ◽  
R Value

Abstract Most international design codes consider the nonlinear seismic performance of a structure by the concept of reduction/modification factor (R). Then, an elastic static force-based method can be normally used for seismic design to create earthquake resistant RC buildings. The response modification factor (R) is sensitive to many aspects such as overall ductility, over-strength, damping, and redundancy levels. Indeed, these factors are severely affected by geometric irregularity of the structural system. So, R-value does not become a constant number for the all types of structures with the same lateral load resisting system, as many standard codes noted. It depends on types, combination, and degrees of geometric vertical irregularity. This research assesses the actual values of R for regular and familiar vertical irregularity cases in RC buildings with moment-resisting frames (MRF) systems. Also, it takes into account the reduction percent that may occurs in R-value due to these studied vertical irregularities. The vertical irregularity cases, such as set-back and soft story, are essentially needed to be studied greater than ever due to the wide propagation of these types of buildings in Egypt, recently. In addition, the potential analytical methods that may be used to calculate R-value in comparison with Egyptian code’s value. Nonlinear static pushover analysis is carried out using ETABS via three-dimensional numerical models. The findings prove that vertical irregular models have poor seismic capacities, in comparison with regular one, due to their sudden change in lateral stiffness than that with regular aspect. So, the response modification factor (R) must be re-calculated or even scaled-down before design stage with 15% and 25% for single and combined vertical irregularity, respectively. In addition, this investigation derives a vital equation between R values with vertical irregularity ratios in each studied model. This equation shall be a guide for seismic design codes, structural design engineers, and researchers. Accordingly, the response modification factor R does not become a fixed value regardless vertical irregularity aspects of the buildings, but it has a variable value that depend on their inelastic seismic performance of the lateral load resisting systems.

Analyzing and Comparing the Floor Response Spectra of the NPP Based on Different Soil Dynamic Numerical Models

2013 ◽  
Author(s):  
Xiu-yun Zhu ◽  
Rong Pan
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Seismic Design ◽  
Nuclear Power ◽  
Numerical Models ◽  
Response Spectra ◽  
Site Conditions ◽  
Design Codes ◽  
Floor Response Spectra ◽  
Soil Dynamic

The traditional soil dynamic impedance models, recommended by the main international seismic design codes of the nuclear power plant (NPP), are only expressed by a single parallel connection system of spring and dashpot which can not reflect the dynamic stiffness varying with excitation frequencies, and also can not simulate the cases of non-homogeneous site conditions. With the recent development of soil-structure interaction (SSI) analysis, based on the damping-solvent extraction method (DSEM) and the lumped parameter models recommended by seismic design codes of ASCE4-98,RCCG which are all applicable to the homogeneous site and also massless foundation model and viscous-spring artificial boundary model of especially fit for the numerical simulation of non-homogeneous site, comparative study of both the direct method and sub-structure method is carried out in this paper. Finally, by taking the analysis of floor response spectra (FRS) for a certain CPR1000 reactor building as an example, comparative analyses of homogeneous and layered site conditions using various soil dynamic numerical models above-mentioned are performed. In addition, in order to validate the accuracy, the calculated results are compared to that of SASSI program. The results show that FRS in the horizontal direction are good agreement regardless for the homogeneous and layered site conditions, the shapes of FRS in the vertical direction change obviously in the homogeneous site condition. This paper provides some guidance and reference in the aspect of evaluation the seismic suitability for the site of nuclear power plant (NPP).

Comparison of Near-Fault Effect Considered in Seismic Design Codes for Building

2011 ◽  
Vol 378-379 ◽  
pp. 270-273
Author(s):  
Jing Zhou ◽  
Xiao Dan Fang
Keyword(s):  
Seismic Design ◽  
Strong Motion ◽  
Source Model ◽  
Empirical Method ◽  
Design Codes ◽  
Design Code ◽  
Effect Factors ◽  
Near Fault ◽  
Seismic Design Code ◽  
Earthquake Source Model

This paper compares the provisions of near-fault effect factors considered in the representative design codes in the world. It is found that the different codes carry out different near-fault effect values. Chinese, American, and New Zealand seismic design codes clearly present the near-fault effect factors, and Chinese seismic design code relatively presents the smallest near-fault effect values among the three codes. While Japanese code accounts for near-fault effect using empirical method and strong motion evaluation employing earthquake source model. The consideration of the near-fault effects in European Standard is the simplest among the five codes.

Evolution of seismic design codes of highway bridges in Chile

2021 ◽  
pp. 875529302098801
Author(s):  
José Wilches ◽  
Hernán Santa Maria ◽  
Roberto Leon ◽  
Rafael Riddell ◽  
Matías Hube ◽  
...  
Keyword(s):  
Seismic Design ◽  
Failure Modes ◽  
Highway Bridges ◽  
Design Codes ◽  
Seismic Codes ◽  
Analysis And Design ◽  
Residual Displacements ◽  
Shear Keys ◽  
Maule Earthquake ◽  
2010 Maule Earthquake

Chile, as a country with a long history of strong seismicity, has a record of both a constant upgrading of its seismic design codes and structural systems, particularly for bridges, as a result of major earthquakes. Recent earthquakes in Chile have produced extensive damage to highway bridges, such as deck collapses, large transverse residual displacements, yielding and failure of shear keys, and unseating of the main girders, demonstrating that bridges are highly vulnerable structures. Much of this damage can be attributed to construction problems and poor detailing guidelines in design codes. After the 2010 Maule earthquake, new structural design criteria were incorporated for the seismic design of bridges in Chile. The most significant change was that a site coefficient was included for the estimation of the seismic design forces in the shear keys, seismic bars, and diaphragms. This article first traces the historical development of earthquakes and construction systems in Chile to provide a context for the evolution of Chilean seismic codes. It then describes the seismic performance of highway bridges during the 2010 Maule earthquake, including the description of the main failure modes observed in bridges. Finally, this article provides a comparison of the Chilean bridge seismic code against the Japanese and United States codes, considering that these codes have a great influence on the seismic codes for Chilean bridges. The article demonstrates that bridge design and construction practices in Chile have evolved substantially in their requirements for the analysis and design of structural elements, such as in the definition of the seismic hazard to be considered, tending toward more conservative approaches in an effort to improve structural performance and reliability for Chilean bridges.

Fuzzy set-theoretic models for interpretation of seismic design codes

1989 ◽  
Vol 29 (3) ◽  
pp. 277-291 ◽  
Author(s):  
Seema Alim ◽  
David Lloyd Smith
Keyword(s):  
Seismic Design ◽  
Fuzzy Set ◽  
Design Codes

Analysis of Collapsed Chimney of Balco Power Plant in India

2011 ◽  
Vol 250-253 ◽  
pp. 2229-2233 ◽  
Author(s):  
Yu Feng Zhang ◽  
Chao Li
Keyword(s):  
Power Plant ◽  
Central India ◽  
Economic Losses ◽  
Cylinder Wall ◽  
Design Codes ◽  
Initial Part ◽  
Scientific Analysis ◽  
The Usa ◽  
Stormy Weather ◽  
Under Construction

A large under-construction chimney at BALCO Power Plant in central India collapsed on Sep. 23, 2009 under severe stormy weather, causing serious casualties and massive economic losses, while another, similarly built, survived. So far, there has been no strict and scientific analysis on the cause of the accident. In this paper, finite element method is used to simulate the effect of wind loads and the whole collapse procedure based on the investigation of information about the design, the construction, the site related records, etc. The results show that the initial part of the chimney destroyed is the top of the structure (specifically the construction platform and the partial top cylinder wall of the chimney); then the debris from the top fells and crashes the lower part of the structure, eventually leading to the whole structure collapsing. The analysis results are basically consistent with the observation of the debris and the toppling scene and what the witnesses described, and scientifically clarify the actual cause of the chimney collapse. In addition, by comparing the chimney design codes between the USA and China, along with the analysis results, some suggestions are proposed to prevent similar accidents in chimney projects.

Sign in / Sign up

Export Citation Format

Share Document