scholarly journals Angiography Simulation and Planning Using a Multi-Fluid Approach

2019 ◽  
Vol 9 (3) ◽  
pp. 379 ◽  
Author(s):  
Dongjin Huang ◽  
Pengbin Tang ◽  
Wen Tang ◽  
Tao Wan
Keyword(s):  
Blood Flow ◽  
Virtual Reality ◽  
Medical Training ◽  
Blood Flow Rate ◽  
Slip Boundary Condition ◽  
Slip Boundary ◽  
Endovascular Interventions ◽  
Interactive Training ◽  
Simulation Based ◽  
3D Software

Angiography is a minimally invasive diagnostic procedure in endovascular interventions. Training interventional procedures is a big challenge, due to the complexity of the procedures with the changes of measurement and visualization in blood flow rate, volume, and image contrast. In this paper, we present a novel virtual reality-based 3D interactive training platform for angiography procedure training. We propose a multi-fluid flow approach with a novel corresponding non-slip boundary condition to simulate the effect of diffusion between the blood and contrast media. A novel syringe device tool is also designed as an add-on hardware to the 3D software simulation system to model haptics through real physical interactions to enhance the realism of the simulation-based training. Experimental results show that the system can simulate realistic blood flow in complex blood vessel structures. The results are validated by visual comparisons between real angiography images and simulations. By combining the proposed software and hardware, our system is applicable and scalable to many interventional radiology procedures. Finally, we have tested the system with clinicians to assess its efficacy for virtual reality-based medical training.

A Lattice Boltzmann and Immersed Boundary Scheme for Model Blood Flow in Constricted Pipes: Part 2 - Pulsatile Flow

2013 ◽  
Vol 14 (1) ◽  
pp. 153-173 ◽  
Author(s):  
S. C. Fu ◽  
R. M. C. So ◽  
W. W. F. Leung
Keyword(s):  
Blood Flow ◽  
Newtonian Fluid ◽  
Lattice Boltzmann ◽  
Flow Behavior ◽  
Numerical Data ◽  
Slip Boundary Condition ◽  
Pulsating Flow ◽  
Immersed Boundary ◽  
Slip Boundary ◽  
Viable Approach

AbstractOne viable approach to the study of haemodynamics is to numerically model this flow behavior in normal and stenosed arteries. The blood is either treated as Newtonian or non-Newtonian fluid and the flow is assumed to be pulsating, while the arteries can be modeled by constricted tubes with rigid or elastic wall. Such a task involves formulation and development of a numerical method that could at least handle pulsating flow of Newtonian and non-Newtonian fluid through tubes with and without constrictions where the boundary is assumed to be inelastic or elastic. As a first attempt, the present paper explores and develops a time-accurate finite difference lattice Boltzmann method (FDLBM) equipped with an immersed boundary (IB) scheme to simulate pulsating flow in constricted tube with rigid walls at different Reynolds numbers. The unsteady flow simulations using a time-accurate FDLBM/IB numerical scheme is validated against theoretical solutions and other known numerical data. In the process, the performance of the time-accurate FDLBM/IB for a model blood flow problem and the ease with which the no-slip boundary condition can be correctly implemented is successfully demonstrated.

Virtual Reality, Augmented Reality, and Virtual Environments: Demonstrations of Current Technologies and Future Directions

2020 ◽  
Vol 64 (1) ◽  
pp. 2119-2123
Author(s):  
Sarah Beadle ◽  
Randall Spain ◽  
Benjamin Goldberg ◽  
Mahdi Ebnali ◽  
Shannon Bailey ◽  
...  
Keyword(s):  
Virtual Reality ◽  
Augmented Reality ◽  
Human Factors ◽  
Virtual Environments ◽  
Medical Training ◽  
Risk Environment ◽  
Future Directions ◽  
Simulated Environments ◽  
Interactive Session ◽  
Immersive Technologies

Virtual environments and immersive technologies are growing in popularity for human factors purposes. Whether it is training in a low-risk environment or using simulated environments for testing future automated vehicles, virtual environments show promise for the future of our field. The purpose of this session is to have current human factors practitioners and researchers demonstrate their immersive technologies. This is the eighth iteration of the “Me and My VE” interactive session. Presenters in this session will provide a brief introduction of their virtual reality, augmented reality, or virtual environment work before engaging with attendees in an interactive demonstration period. During this period, the presenters will each have a multimedia display of their immersive technology as well as discuss their work and development efforts. The selected demonstrations cover issues of designing immersive interfaces, military and medical training, and using simulation to better understand complex tasks. This includes a mix of government, industry, and academic-based work. Attendees will be virtually immersed in the technologies and research presented allowing for interaction with the work being done in this field.

scholarly journals Face, Content, and Construct Validity of a Virtual Reality Otoscopy Simulator and Applicability to Medical Training

2021 ◽  
pp. 019459982110328
Author(s):  
Tobias Albrecht ◽  
Christoph Nikendei ◽  
Mark Praetorius
Keyword(s):  
Virtual Reality ◽  
Medical Students ◽  
Construct Validity ◽  
Content Validity ◽  
Medical Training ◽  
Controlled Trial ◽  
Correct Diagnosis ◽  
Age Groups ◽  
Tertiary Referral Center ◽  
The Face

Objective Otologic diseases are common in all age groups and can significantly impair the function of this important sensory organ. To make a correct diagnosis, the correct handling of the otoscope and a correctly performed examination are essential. A virtual reality simulator could make it easier to teach this difficult-to-teach skill. The aim of this study was to assess the face, content, and construct validity of the novel virtual reality otoscopy simulator and the applicability to otologic training. Study Design Face and content validity was assessed with a questionnaire. Construct validity was assessed in a prospectively designed controlled trial. Setting Training for medical students at a tertiary referral center. Method The questionnaire used a 6-point Likert scale. The otoscopy was rated with a modified Objective Structured Assessment of Technical Skills. Time to complete the task and the percentage of the assessed eardrum surface were recorded. Results The realism of the simulator and the applicability to medical training were assessed across several items. The ratings suggested good face and content validity as well as usefulness and functionality of the simulator. The otolaryngologists significantly outperformed the student group in all categories measured (P < .0001), suggesting construct validity of the simulator. Conclusion In this study, we could demonstrate face, content, and construct validity for a novel high-fidelity virtual reality otoscopy simulator. The results encourage the use of the otoscopy simulator as a complementary tool to traditional teaching methods in a curriculum for medical students.

scholarly journals The appearance of boundary layers and drift flows due to high-frequency surface waves

2012 ◽  
Vol 707 ◽  
pp. 482-495 ◽  
Author(s):  
Ofer Manor ◽  
Leslie Y. Yeo ◽  
James R. Friend
Keyword(s):  
Boundary Layer ◽  
Surface Waves ◽  
High Frequency ◽  
Slip Boundary Condition ◽  
Inertial Effects ◽  
Velocity Amplitude ◽  
Slip Boundary ◽  
Long Period ◽  
Bulk Waves ◽  
Schlichting Streaming

AbstractThe classical Schlichting boundary layer theory is extended to account for the excitation of generalized surface waves in the frequency and velocity amplitude range commonly used in microfluidic applications, including Rayleigh and Sezawa surface waves and Lamb, flexural and surface-skimming bulk waves. These waves possess longitudinal and transverse displacements of similar magnitude along the boundary, often spatiotemporally out of phase, giving rise to a periodic flow shown to consist of a superposition of classical Schlichting streaming and uniaxial flow that have no net influence on the flow over a long period of time. Correcting the velocity field for weak but significant inertial effects results in a non-vanishing steady component, a drift flow, itself sensitive to both the amplitude and phase (prograde or retrograde) of the surface acoustic wave propagating along the boundary. We validate the proposed theory with experimental observations of colloidal pattern assembly in microchannels filled with dilute particle suspensions to show the complexity of the boundary layer, and suggest an asymptotic slip boundary condition for bulk flow in microfluidic applications that are actuated by surface waves.

Sign in / Sign up

Export Citation Format

Share Document